Altimeter setting

Altimeter setting is the value of the atmospheric pressure used to adjust the sub-scale of a pressure altimeter so that it indicates the height of an aircraft above a known reference surface.^[1] This reference can be the mean sea level pressure (QNH), the pressure at the nearby surface airport or the pressure level of 1,013.25 hectopascals (29.92 inches of mercury) which gives the standard flight levels

The altimeter setting QNH is one of the data included in METAR messages from weather stations in addition to the surface pressure. An alternative setting is QFE:

QNH is the barometric altimeter setting that causes an altimeter to read airfield elevation above mean sea level when on the airfield. In ISA temperature conditions the altimeter will read altitude above mean sea level in the vicinity of the airfield.
QFE is the barometric altimeter setting that causes an altimeter to read zero when at the reference datum of a particular airfield (in practice, the reference datum is either an airfield center or a runway threshold). In ISA temperature conditions the altimeter will read height above the airfield/runway threshold in the vicinity of the airfield.

QNH and QFE are arbitrary Q codes rather than abbreviations, but the mnemonics "nautical height" (for QNH) and "field elevation" (for QFE) are often used by pilots to distinguish between them.

References

↑ World Meteorological Organization. "Altimeter setting". Eumetcal. Retrieved January 2, 2016.

This article is issued from Wikipedia - version of the 9/2/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.