Avia BH-6
BH-6 | |
---|---|
Role | Fighter |
Manufacturer | Avia |
Designer | Pavel Beneš and Miroslav Hajn |
First flight | 1923 |
Number built | 1 |
|
The Avia BH-6 was a prototype fighter aircraft built in Czechoslovakia in 1923. It was a single-bay biplane of unusual configuration developed in tandem with the BH-7, which shared its fuselage and tail design.
Development
The BH-6 had wings of unequal span, but unusually, the top wing was the shorter of the two; and while it was braced to the bottom wing with a single I-strut on either side, these sloped inwards from bottom to top. Finally, the top wing was attached to the fuselage not by a set of cabane struts, but by a single large pylon.
The BH-6 crashed early in its test programme, and when the related BH-7 did as well, both implementations of this design were abandoned.
Specifications
General characteristics
- Crew: one pilot
- Length: 6.47 m (21 ft 3 in)
- Wingspan: 9.98 m (32 ft 9 in)
- Height: 2.88 m (9 ft 5 in)
- Wing area: 22.6 m2 (243 ft2)
- Empty weight: 878 kg (1,936 lb)
- Gross weight: 1,180 kg (2,601 lb)
- Powerplant: 1 × Skoda licence-built Hispano-Suiza 8Fb Vee-8, 310 kW (231 hp)
Performance
- Maximum speed: 220 km/h (137 mph)
- Endurance: 2 hours
- Service ceiling: 7,000 m (23,000 ft)
Armament
- 2 × fixed, forward-firing .303 Vickers machine guns
See also
- Related development
References
Wikimedia Commons has media related to Avia BH-6. |
- Taylor, Michael J. H. (1989). Jane's Encyclopedia of Aviation. London: Studio Editions. p. 86.
- World Aircraft Information Files. London: Bright Star Publishing. pp. File 889 Sheet 86.
- Němeček, V. (1968). Československá letadla. Praha: Naše Vojsko.
- airwar.ru
This article is issued from Wikipedia - version of the 11/12/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.