Bartel BM-5

Bartel BM-5
Role Trainer aircraft
Manufacturer Samolot
First flight 27 July 1928
Introduction 1930
Retired 1939
Primary user Polish Air Force
Produced 1929-1930
Number built 62


The Bartel BM-5 was a Polish biplane advanced trainer used from 1930 to 1939 by the Polish Air Force, manufactured in the Samolot factory in Poznań.

Design and development

The aircraft was designed by Ryszard Bartel in Samolot factory in Poznań, as an advanced trainer, transitory between primary trainers and bomber or reconnaissance aircraft. Bartel had worked since 1926 on his BM-3 advanced trainer design, the preliminary design for which won a military contest, but in the meantime he developed a quite successful primary trainer Bartel BM-4 and then decided to model the advanced trainer upon that plane, to obtain better durability. The result was the BM-5 design. The BM-5 prototype was built in 1928 and flown on 27 July that year in Poznań. It had good handling, high stability and spin resistance, which made it a suitable trainer for larger aircraft. A distinguishing feature of all Bartels was an upper wing of a shorter span, because lower and upper wing halves were interchangeable (i.e. the lower wingspan included the width of the fuselage).

The first prototype was designated BM-5a and was fitted with a 220 hp (160 kW) Austro-Daimler inline engine. The second prototype, flown on 15 April 1929, was designated BM-5b and was fitted with a 230 hp (170 kW) SPA-6A inline engine, then was refitted in August with a 320 hp (240 kW) Hispano-Suiza 8Fb V-engine and redesignated BM-5c (it was meant to utilize engine stores from the Bristol F.2 Fighter). Next 20 aircraft of each type were built: BM-5a, BM-5b and BM-5c.

A disadvantage of most BM-5s were old and faulty engines. From all the variants the BM-5a variant was the heaviest and had the worst performance. For that reason in 1935 one BM-5 was fitted at the PZL works with a 240 hp (180 kW) Wright Whirlwind J-5 radial engine, produced in Poland (in Polish Skoda Works, then Avia). This variant was designated the BM-5d and 20 of BM-5a and BM-5b were next converted to BM-5d.

Operational history

BM-5s were used in the Polish Air Force for training from 1930, in a central pilots' school in Dęblin. 5 BM-5c's were used in Naval Air Unit (MDLot) in Puck. Most were written off in the second half of 1930s and replaced with the PWS-26. Some survived until the German invasion of Poland in September 1939. None survived the war.

Operators

 Poland

Specifications (BM-5d)

Description

Wooden construction biplane. Fuselage rectangular in cross-section, plywood covered (engine section - aluminum covered). Rectangular two-spar wings, plywood and canvas covered. Crew of two, sitting in tandem in open cockpits, with individual windshields and twin controls, instructor in rear cockpit. Fixed landing gear, with a rear skid. Engine in front, with a water radiator below fuselage nose (BM-4a,b,c). Two-blade wooden propeller. Fuel tanks in upper wings and fuselage, capacity: 235-270 l.

Engines used:

General characteristics

Performance

Armament

None

References

    External links

    Wikimedia Commons has media related to Bartel aircraft.


    This article is issued from Wikipedia - version of the 11/15/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.