Bavarian B I
Bavarian B I | |
---|---|
Year(s) of manufacture | 1847ff. |
Retired | 1896 |
Wheel arrangement | 2-4-0 |
Axle arrangement | 1B n2 |
Gauge | 1,435 mm |
Length over buffers | 12,585/13,670 mm |
Service weight | 24.8/26.0 t |
Adhesive weight | 17.1/17.4 t |
Axle load | 8.5/8.7 t |
Top speed | 65 km/h |
Driving wheel diameter | 1,372/1,400 mm |
Leading wheel diameter | 915 mm |
No. of cylinders | 2 |
Cylinder bore | 381 mm |
Piston stroke | 610 mm |
Boiler Overpressure | 6/8 bar |
Grate area | 0.86/0.93 m² |
Evaporative heating area | 79.90/74.50 m² |
Tender | 3 T 4.2/5 |
Water capacity | 4.2/5.0 m³ |
Bavarian B I engines were 2-4-0 steam locomotives of the Royal Bavarian State Railways (Königlich Bayerische Staatsbahn).
The Class B I was developed in parallel with the Class A II, but had a coupled axle instead of a second carrying axle. As a result, it developed a higher tractive effort. It also had a Stephenson Long Boiler, forked frame and an outside Stephenson valve gear with outside cylinders. The coupling rods were based on an American prototype. Later many of the engines were fitted with a Crampton boiler.
They were coupled to 3 T 4.2, and later 3 T 5, tenders.
See also
External links
- There is a relevant English-language forum at Railways of Germany
This article is issued from Wikipedia - version of the 10/29/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.