Cadec-online.com

cadec-online.com

Screenshot of cadec-online.com's homepage.
Type of site
Cloud computing
Available in English, Spanish, Portuguese, Farsi
Headquarters Morgantown, West Virginia
Created by Ever J. Barbero
Slogan(s) Cloud Laminate Analysis Software
Website cadec-online.com
Registration Required
Users 1337 [1]
Launched February 9, 2011 (2011-02-09)
Current status Active
Content licence
Terms and Conditions
Written in ASP.NET, C#, Fortran

cadec-online.com is a multilingual web application that performs analysis of composite materials [2] and is used primarily for teaching,[3] especially within the disciplines of aerospace engineering, materials science, naval engineering,[4] mechanical engineering,[5] and civil engineering. Users navigate the application through a tree view which structures the component chapters. cadec-online is an engineering cloud application.[6] It uses the LaTeX library to render equations and symbols, then Sprites to optimize the delivery of images to the page.

Chapters

Micromechanics

cadec-online.com implements micromechanics for composites reinforced with unidirectional fibers, and random fibers, as well as plain weave, twill, and satin textiles. It predicts lamina elastic moduli, strength values, coefficient of thermal expansion (CTE), moisture expansion, and other micromechanical properties. The application conducts this analysis through several theoretical models, including:

Lamina analysis

cadec-online.com can calculate the three-dimensional (3D) stiffness and compliance matrices, the two-dimensional (2D) reduced stiffness and compliance matrices, in lamina coordinate system (cs). It is also capable of transforming the composite laminates matrices to any other coordinate system. Lamina types supported by the software include:

Laminate analysis

The application can carry out laminate analyses including calculation of laminate stiffness, stress, strain, and failure. The software supports intact and damaged laminates (see damage mechanics). For each category, cadec-online.com can calculate the laminate thermal stresses, laminate coefficient of thermal expansion, laminate stiffness and compliance matrices for composite laminates. Also, the application can predict the laminate moduli, which are orthotropic material equivalents for the stiffness of the laminate in both bending and membrane modes of deformation.

Failure analysis

cadec-online.com predicts failures such as first ply failure (FPF) and last ply failure (LPF) under mechanical, thermal, and moisture loads, as well as insitu effects, using several failure criteria (FC) including:

Damage Mechanics

Uses discrete damage mechanics (DDM) to predict crack density vs. strain for any symmetric laminate subjected to any membrane state of strain. The results can be exported to Excel for plotting. The state variable describing the damage state of the material is the crack density in each ply. The thermodynamic force is the midsurface strain applied to the laminate. The relevant material properties are the fracture toughnesses in modes I (opening) and II (shear) of the ply.

Textile reinforced composite analysis

The application can predict the stiffness and strength of composite materials reinforced with plain weave, twill, and satin textile, also called fabric. The textile lamina is idealized as a transversely isotropic material. The calculated textile lamina can be used as any other lamina in the rest of the application. The calculated properties include:

Thin walled beam analysis

The application is able to analyze laminated composite thin walled beams with general cross sections. Beams can be asymmetric and loaded by general combinations of forces in three planes (axial, vertical and horizontal) as well as by three moments (torque and two bending moments). cadec-online.com computes section properties such as the shear center.

Mechanical and environmental loads

cadec-online.com defines four different types of loads:

Application programming interface

cadec-online.com features an API that allows users to access virtually all of the capabilities present in the web version of the software from other software environments such as Abaqus, Ansys, Matlab, Python, .NET Framework, Mathematica, etc.[14]

References

  1. http://www.cadec-online.com/API.asmx/NumberOfUsers
  2. Cosso, F.A., Barbero, E.J., Computer aided design environment for composites, Proceedings 2012 SAMPE International Symposium and Exhibition
  3. Instituto Tecnologico de Buenos Aires, Argentina
  4. Facultat de Nautica de Barcelona, Spain
  5. Department of Mechanical Engineering, Mercer University, USA
  6. Engineering Tools Take to the Cloud, Design news, 7/23/2012
  7. Halpin, J. and Tsai, S. W., Effects of Environmental Factors on Composite Materials, AFML-TR, 1969.
  8. Luciano, R. and Barbero, E. J., Int. J. Solids Struct. 31 (1994) 2933.
  9. Reuss, A. (1929). "Berechnung der Fließgrenze von Mischkristallen auf Grund der Plastizitätsbedingung für Einkristalle". Journal of Applied Mathematics and Mechanics. 9: 49–58. doi:10.1002/zamm.19290090104.
  10. Tsai, S. W. and Hahn, H. T., Introduction to Composite Materials, Technomic, Lancaster, PA, 1980.
  11. Z. Hashin and A. Rotem, A fatigue failure criterion for fiber-reinforced material, Journal of Composite Materials, 7 (1973) 448-464.
  12. A. Puck, and H. Schurmann, Failure Analysis of FRP Laminates by Means of Physically Based Phenomenological Models, Composites Science and Technology, 62 (2002) 1633-1662.
  13. Hart-Smith, L. J., The Institution of Mechanical Engineers, Part G: J. Aerospace Eng. 208 (1994) 9.
  14. forum.cadec-online.com
Notes
  • " CADALIST, Vol. 17, No. 27.
  • " Desktop Engineering—Analysis and Simulation, July 30, 2012.
  • " Composite Consultants, Aug. 6, 2012.
This article is issued from Wikipedia - version of the 7/27/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.