Carbon fiber testing

Carbon fiber testing is a material science test involving the testing of all carbon fiber containing materials. The results for the testing are used to select and design material composites, manufacturing processes and to ensured safety and integrity. Particularly safety-critical carbon fiber parts, such as structural parts in machines, vehicles, aircraft or architectural elements are subject to testing.

Concepts

Testing sciences classify three main disciplines for material testing that especially apply to carbon fiber materials. Most common are destructive tests, such as stress, fatigue and micro sectioning tests. There are also methods that allow non-destructive testing (NDT), so the material can be still be used after testing. Common methods are ultrasonic, X-ray, HF Eddy Current, Radio Wave testing or thermography.[1] Additionally, Structural Health Monitoring (SHM) methods allow the testing during application.

Testing methods

Carbon (carbon fiber reinforced plastic and reinforced polymers) are gaining importance as light-weight material. Particularly safety-critical carbon fiber parts, such as aircraft frames, need to be tested destructively (e.g. stress, fatigue) and non-destructively (e.g. fiber orientation, delamination, bonding).[2] Typically, destructive tests are carried out to validate the mechanical properties, whereas NDT are used to monitor and control the manufacturing process of the CFRP parts.[3] As carbon fiber composites are highly individual in shape and material composition novel NDT are emerging and sought for application.[4] Applicable technologies are radio wave testing[5] and high frequency eddy current testing,[6] thermography, shearography,[7] air coupled laser ultrasonics, terahertz scanning[8]

Typical effects and defects

The specifications for integrity of structurally relevant parts depend on the individual manufacturer. However, typically relevant quality criteria of the texture are fiber orientation, gaps, wrinkles, overlaps, distortion, undulation, uniformity[9] as well as defects in the matrix delamination, inclusion, cracks, curing, void, debonding.[10] Furthermore, basis weight or carbon fiber volume content are important properties. Generally, defects and effects in carbon fiber materials are classified according to their location as structural defects (carbon fiber related) and matrix defects (resin related). Carbon fiber related effects are tested with X-ray and high frequency testing methods whereas matrix effects are commonly tested with ultrasonic and thermographic methods.

Structural defects Matrix defects
Distortions & misalignments Matrix delamination
Wrinkles & overlaps Inclusions
Fuzzy balls Voids and pores
Gaps & undulations Cracks
Curing
Debonding
Hot spots
Impacts & delaminations

See also

References

  1. Hodgkinson, J.M. (2000). "Mechanical Testing of Advanced Fibre Composites". Woodhead Publishing. ISBN 978-1-85573-312-1.
  2. Erb, T. (2003). "Methodik zur Bewertung von Fehlern in Strukturbauteilen aus Faser-Kunststoffverbunden im Automobilbau". University of Darmstadt.
  3. Hufenbach, W. (2007). "Textile Composite Construction and Manufacturing Technologies for Leight Weight Con-struction in Mechanical and Automotive Engineering". SDV - Die Median AG.
  4. Unnthorsonn, R., Jonsson, M. P., Runarsson, T. P. (2004). "NDT Methods for Evaluating Carbon Fibre Composites". Comptest. Bristol: University of Bristol.
  5. Heuer, H., Schulze, M. (2011). "Eddy Current Testing of Carbon Fiber Materials by High Resolution". International Workshop on SMART MATERIALS, STRUCTURES & NDT in AEROSPACE, Conference NDT, Canada 2011.
  6. JEC Composites, Innovation Award NON DESTRUCTIVE TESTING (2013). "Non-destructive test carbon fiber products (dry fabrics and composites) without coupling media".
  7. Oster, R. (2012). "Non-destructive testing methodologies on helicopter fiber composite components challenges today and in the future". 18th World Conference on Nondestructive Testing. Durban, South Africa. Conference Proceedings: 16–20.
  8. Lopato, P., Chady, T., Sikora, R. (2011). "Testing of composite materials using advanced NDT methods". COMPEL: the International Jour-nal for Computation and Mathematics in Electrical and Electronic Engineering. 30 (4): 1260–1270.
  9. Heuer, H., Schulze, M. (2011). "Eddy Current Testing of Carbon Fiber Materials by High Resolution". International Workshop on SMART MATERIALS, STRUCTURES & NDT in AEROSPACE, Conference NDT, Canada 2011.
  10. Leckey, C. A. C., Parker, F. R. (2014). "NDE and SHM Simulation for CFRP Composites". American Society for Composites Technical Conference; 29th; 8-10 Sept. 2014.

External links

This article is issued from Wikipedia - version of the 11/3/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.