Cementitious foam insulation

Cementitious foam insulation is a cement-based thermal and acoustic insulation,[1] with an R-value which is similar to that of fiberglass[2] It is installed as a foam with a consistency like shaving cream,[2] or as pre-cast slabs.[3] The current cost is similar to that of polyurethane foams.[2]

Unlike many foam-in-place polyurethane foams, it is nonflammable and non-toxic.[2] As it is water-based, it offgasses water vapour while curing, requiring ventilation and in some cases an dehumidifier. It cures more slowly than organic foams. However, it does not offgas volatile organic compounds as many organic foams do. Like cement, it is water-soluble until cured, but after curing it is water-resistant,[1] but water-permeable.[4]

It does not expand on setting, but may shrink slightly in open cavities. Structurally, it does not resemble concrete; at the low densities that make it well-insulating, it is quite fragile. It can be crumbled away to re-expose wiring or pipes, making a pile of grey powder. Also unlike concrete, it is quite lightweight.[1]

It is not a new product, having been around for some decades, but exclusive rights to an established cementitious foam product have recently been purchased by a company that has been giving it more publicity.[1]

References

  1. 1 2 3 4 http://www.myhomescience.com/cementitious-foam-insulation-gets-second-look/
  2. 1 2 3 4 Department of Energy. "Insulation Materials". Retrieved 2016-08-17.
  3. ↑ http://www.induceramic.com/industrial-ceramic-product/ceramic-foam-insulation/foam-cement-insulation-board
  4. ↑ "Ruling No. 10-05-1241 Application No. B-2009-42". Ontario Ministry of Municipal Affairs and Housing, Building Code Commission.
This article is issued from Wikipedia - version of the 8/18/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.