Chloralkali process
.JPG)
The chloralkali process (also chlor-alkali and chlor alkali) is an industrial process for the electrolysis of NaCl. It is the technology used to produce chlorine and sodium hydroxide (caustic soda), which are commodity chemicals required by industry. 35 million tons of chlorine were prepared by this process in 1987.[1] Industrial scale production began in 1892.
Usually the process is conducted on a brine (an aqueous solution of NaCl), in which case NaOH, hydrogen, and chlorine result. When using calcium chloride or potassium chloride, the products contain calcium or potassium instead of sodium. Related processes are known that use molten NaCl to give chlorine and sodium metal or condensed hydrogen chloride to give hydrogen and chlorine.
The process has a high energy consumption, for example over 4 billion kWh per year in West Germany in 1985.[2] Because the process gives equivalent amounts of chlorine and sodium hydroxide (two moles of sodium hydroxide per mole of chlorine), it is necessary to find a use for these products in the same proportion. For every mole of chlorine produced, one mole of hydrogen is produced. Much of this hydrogen is used to produce hydrochloric acid or ammonia, or is used in the hydrogenation of organic compounds.[3]
Process systems
Three production methods are in use. While the mercury cell method produces chlorine-free sodium hydroxide, the use of several tonnes of mercury leads to serious environmental problems. In a normal production cycle a few hundred pounds of mercury per year are emitted, which accumulate in the environment. Additionally, the chlorine and sodium hydroxide produced via the mercury-cell chloralkali process are themselves contaminated with trace amounts of mercury. The membrane and diaphragm method use no mercury, but the sodium hydroxide contains chlorine, which must be removed.
The performance these devices is governed by the considerations of electrochemical engineering.
Membrane cell
The most common chloralkali process involves the electrolysis of aqueous sodium chloride (a brine) in a membrane cell.
Saturated brine is passed into the first chamber of the cell where the chloride ions are oxidised at the anode, losing electrons to become chlorine gas (A in figure):
- 2Cl− → Cl
2 + 2e−
At the cathode, positive hydrogen ions pulled from water molecules are reduced by the electrons provided by the electrolytic current, to hydrogen gas, releasing hydroxide ions into the solution (C in figure):
- 2H
2O + 2e− → H2 + 2OH−
The ion-permeable ion exchange membrane at the center of the cell allows the sodium ions (Na+) to pass to the second chamber where they react with the hydroxide ions to produce caustic soda (NaOH) (B in figure). The overall reaction for the electrolysis of brine is thus:
- 2NaCl + 2H
2O → Cl
2 + H
2 + 2NaOH
A membrane cell is used to prevent the reaction between the chlorine and hydroxide ions. If this reaction were to occur the chlorine would be disproportionated to form chloride and hypochlorite ions:
- Cl
2 + 2OH− → Cl− + ClO− + H
2O
Above about 60 °C, chlorate can be formed:
- 3Cl
2 + 6OH− → 5Cl− + ClO
3− + 3H
2O
Because of the corrosive nature of chlorine production, the anode (where the chlorine is formed) must be made from a non-reactive metal such as titanium, whereas the cathode (where hydroxide forms) can be made from a more easily oxidized metal such as nickel.
Diaphragm cell
In the diaphragm cell process, there are two compartments separated by a permeable diaphragm, often made of asbestos fibers. Brine is introduced into the anode compartment and flows into the cathode compartment. Similarly to the Membrane Cell, chloride ions are oxidized at the anode to produce chlorine, and at the cathode, water is split into caustic soda and hydrogen. The diaphragm prevents the reaction of the caustic soda with the chlorine. A diluted caustic brine leaves the cell. The caustic soda must usually be concentrated to 50% and the salt removed. This is done using an evaporative process with about three tonnes of steam per tonne of caustic soda. The salt separated from the caustic brine can be used to saturate diluted brine. The chlorine contains oxygen and must often be purified by liquefaction and evaporation.
Mercury cell
In the mercury-cell process, also known as the Castner–Kellner process, a saturated brine solution floats on top of a thin layer of mercury. The mercury is the cathode, where sodium is produced and forms a sodium-mercury amalgam with the mercury. The amalgam is continuously drawn out of the cell and reacted with water which decomposes the amalgam into sodium hydroxide, hydrogen and mercury. The mercury is recycled into the electrolytic cell. Chlorine is produced at the anode and evaporates out of the cell. Mercury cells are being phased out due to concerns about mercury poisoning from mercury cell pollution such as occurred in Canada (see Ontario Minamata disease) and Japan (see Minamata disease).
Manufacturer Associations
The interests of chloralkali product manufacturers are represented at regional, national and international levels by associations such as Euro Chlor and The World Chlorine Council.
Laboratory procedure
Electrolysis can be done with beakers, one containing a brine solution (salt water) and one containing pure water connected by a salt bridge. Anodes are made ideally from platinum metals, which resist corrosion. Since corrosion is less severe at the cathode, it can be stainless steel or silver.
See also
 |
Wikimedia Commons has media related to Chloralkali process. |
References
- ↑ Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. ISBN 0-08-037941-9.
- ↑ Holleman, A. F.; Wiberg, E. (2001), Inorganic Chemistry, San Diego: Academic Press, ISBN 0-12-352651-5
- ↑ R. Norris Shreve; Joseph Brink (1977). Chemical Process Industries (4th ed.). p. 219. ASIN B000OFVCCG.
Further reading
- Bommaraju, Tilak V.; Orosz, Paul J.; Sokol, Elizabeth A.(2007). "Brine Electrolysis." Electrochemistry Encyclopedia. Cleveland: Case Western Rsserve University.