Common Flash Memory Interface

The Common Flash Memory Interface (CFI) is an open standard jointly developed by AMD, Intel, Sharp and Fujitsu. It is implementable by all flash memory vendors, and has been approved by the non-volatile-memory subcommittee of JEDEC.[1] The goal of the specification is the interchangeability of flash memory devices offered by different vendors. The developer is able to use one driver for different flash products by reading identifying information from the flash chip.

Each flash memory device contains the following information: memory size, byte and word configuration, block configuration, and voltage and timing data.

The specification provides several benefits. No or very little information about flash devices has to be stored in tables within system software. It is possible to use lower cost flash memory devices as they become available without rewriting system software. Adapting current software systems shall be done more easily and quickly than previously.

Support for CFI is implemented in FreeBSD.

See also

References

  1. "JEDEC Standard: Common Flash Interface" (PDF). JEDEC. September 2003. Archived from the original (PDF) on 6 March 2009.

External links

JEDEC - free documents require registration

Spansion

AMD

This article is issued from Wikipedia - version of the 11/28/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.