Privilege level

Privilege level order in Intel x86 microprocessors.

A privilege level in the x86 instruction set controls the access of the program currently running on the processor to resources such as memory regions, I/O ports, and special instructions. There are 4 privilege levels ranging from 0 which is the most privileged, to 3 which is least privileged. Most modern operating systems use level 0 for the kernel/executive, and use level 3 for application programs. Any resource available to level n is also available to level 0..n, so the privilege levels are "rings". When a lesser privileged process tries to access a higher privileged process, a General Protection Fault is reported by the OS.

It is not necessary to use all four privilege levels, Because the current Operating Systems like Windows, Linux , etc. mostly are using Paging mechanism and Paging only has one bit to specify the privilege level which is either Supervisor or User (U/S Bit). Windows NT uses the two-level system.^[1] The real mode programs in 8086 are executed at level 0 (highest privilege level) whereas virtual mode in 8086 executes all programs at level 3.^[2]

See also

• Protected mode
• Memory segment
• Segment descriptors
• Call gate (Intel)

References

1. Russinovich, Mark E.; David A. Solomon (2005). Microsoft Windows Internals (4 ed.). Microsoft Press. pp. 16. ISBN 978-0-7356-1917-3
2. Sunil Mathur, "Microprocessor 8086: Architecture, Programming and Interfacing" , Eastern Economy Edition, PHI Learning

• Intel 80386 Programmer's Reference