Glaser-Dirks DG-100

DG-100

Role	Club class (formerly Standard class) sailplane
National origin	Germany
Manufacturer	Glaser-Dirks/DG Flugzeugbau
Designer	Wilhelm Dirks
First flight	10 May 1974^[1]
Number built	327
Developed from	Akaflieg Darmstadt D-38

The Glaser-Dirks DG-100 of 1974 is the first sailplane manufactured by Glaser-Dirks, developed from the Akaflieg Darmstadt D-38, the Standard class sailplane was designed by Wilhelm Dirks.

Development

The first model had an all-flying tailplane, with anti-balance tabs along the entire trailing edges, and a two-piece canopy (movable and fixed parts), built of GFRP (glass-fibre reinforced plastic)/foam sandwich materials and resin impregnated rovings for high strength parts. Successive developments included the DG-100G, DG-101 and DG-101G. Most models are available with water ballast bags in the wings.

The DG-101 and DG-101G had improvements such as a single-piece front-hinged canopy, improved crash resistant cockpit and a conventional tailplane (with fixed horizontal stabilizer and articulated elevator). There was also a club version of this sailplane with fixed landing gear. All models featured top-surface-only air brakes.

Some later models were also manufactured by the Elan company in Slovenia and can be identified by the word "ELAN" on the fuselage and rudder. The serial number of these gliders is prefixed with "E".

Although these gliders were designed in the 1970s, they are still popular in the Club class and remain competitive in Sports class contests (which are handicapped).

The wing's control surface hookups are non-automatic and utilize L'Hotellier fittings, which must be secured by a secondary means such as a safety pin, safety wire, Uerling Sleeve or Wedekind Sleeve (See this web page for more details on this subject).

The Glaser-Dirks Company declared bankruptcy, after which the newly organized company DG Flugzeugbau GmbH assumed responsibility for servicing the gliders.

Variants

Akaflieg Darmstadt D-38: The prototype designed and built at Darmstadt University of Technology.
DG-100: The initial production version developed by Wilhelm Dirks.
DG-100G: Later production with a conventional tailplane and elevator in place of the all-flying tailplane.
DG-100 Club / Club DG: An unballasted, fixed gear version with a gross weight of 385 kg / 849 lb..
DG-101: The DG-101 introduced a one-piece full length canopy that opened forwards, but retaining the all-flying tail.
DG-101G: Ultimate production version with the one-piece canopy and the conventional tailplane with elevator.

Specifications (DG-100)

Cockpit of a DG-100 Elan

Data from Jane's All The World's Aircraft 1982–83.^[2]

General characteristics

Crew: One pilot
Capacity: 100 kg (220 lb) water ballast^[1]
Length: 7.00 m (22 ft 11¾ in)
Wingspan: 15.00 m (49 ft 2½ in)
Height: 1.4 m (4 ft 7 in)
Wing area: 11.0 m² (118.4 ft²)
Aspect ratio: 20.5:1
Empty weight: 230 kg (507 lb)
Gross weight: 418 kg (921 lb)

Performance

Maximum speed: 260 km/h (161 mph)
Maximum glide ratio: 39:1
Rate of sink: 0.59 m/s (116 ft/min)

References

1 2 Taylor 1982, pp. 612–613.
↑ Taylor 1982, pp. 620–621.

Taylor, John W. R. Jane's All The World's Aircraft 1982–83. London: Jane's Yearbooks, 1982. ISBN 0-7106-0748-2

External links

Wikimedia Commons has media related to DG-100.

Aircraft produced by Glaser-Dirks Flugzeugbau, later DG Flugzeugbau

DG-100 DG-200 DG-300 DG-400 DG-500 DG-600 DG-800 DG-1000

This article is issued from Wikipedia - version of the 11/2/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.