DIII-D (fusion reactor)

This article is about the DIII-D Tokamak. For other uses, see Tokamak.

DIII-D
Type Tokamak
Major radius 1.67 m
Minor Radius 0.67 m
Magnetic field 2.2 T (toroidal)
Heating 26 MW
Plasma current 3.0 MA
Location General Atomics, San Diego, California, United States.

DIII-D is a tokamak developed in the 1980s by General Atomics in San Diego, USA, as part of the ongoing effort to achieve magnetically confined fusion. The mission of the DIII-D Research Program is to establish the scientific basis for the optimization of the tokamak approach to fusion energy production.[1]

DIII-D pioneered new technology including the use of beams of neutral particles to penetrate the confinement field of the device and heat the plasma within. It achieved several milestones including the highest plasma β parameter ever achieved at the time (early 1980s) and the highest neutron flux (fusion rate) ever achieved at the time (early 1990s). DIII-D continues to be operated by General Atomics, focusing primarily on exploration of the advanced tokamak regime.

Advanced tokamaks are characterized by operation at high plasma β through strong plasma shaping, active control of various plasma instabilities, and achievement of current and pressure profiles that produce high performance. As of 2005 DIII-D is the third-largest operating shaped tokamak in the world (after JET in the UK and JT-60U in Japan).

DIII-D Program

The DIII-D Program is a large international program, with more than 90 participating institutions. General Atomics operates the San Diego-based facility for the United States Department of Energy through the Office of Fusion Energy Sciences. [2]

Research in DIII-D aims to elucidate the basic physics processes that govern the behavior of a hot magnetized plasma, and to develop a scientific basis for future “burning plasma” devices such as ITER, a Fusion Nuclear Science Facility and ultimately a fusion power plant. The operation of the DIII-D Tokamak consists of a complex set of systems involving high power, high vacuum, intense lasers, high power RF, high energy beams, cryogenic systems, plasma, and radiation producing equipment. [3]

History

History of DIII-D at General Atomics

In May 1974, AEC selected General Atomics to build the Doublet III magnetic fusion experiment based on the success of earlier Doublet I and II magnetic confinement experiments. In Feb 1978, Doublet III fusion machine achieved its first plasma conditions at General Atomics. The machine was later upgraded and renamed DIII-D. [4]

See also

References

  1. ↑ https://fusion.gat.com/global/DIII-DOpps
  2. ↑ General Atomics - Magnetic Fusion Energy. "ga.com". Retrieved Nov 30, 2016.
  3. ↑ General Atomics - Nuclear Energy. "ga.com". Retrieved Nov 30, 2016.
  4. ↑ General Atomics History. May 1974 and Feb 1978."ga.com". Retrieved Nov 30, 2016. url=http://www.ga.com/Websites/ga/images/about/history/1974-may.jpg, url=http://www.ga.com/Websites/ga/images/about/history/1978-february.jpg

Coordinates: 32°53′36.46″N 117°14′4.40″W / 32.8934611°N 117.2345556°W / 32.8934611; -117.2345556


This article is issued from Wikipedia - version of the 12/1/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.