DR Class 25.10
DR Class 25.10 | |
---|---|
![]() | |
Number(s) | DR 25 1001–1002 |
Quantity | 2 |
Manufacturer | Lokomotivbau "Karl Marx" Babelsberg |
Year(s) of manufacture | 1954- 1955 |
Retired | 1967 |
Wheel arrangement | 2-8-0 |
Axle arrangement | 1'D |
Axle arrangement | 1'D h2 |
Type | 25 1001: S 45.18 25 1002: S 45.17 |
Gauge | 1,435 mm (4 ft 8 1⁄2 in) |
Length over buffers | 23,300 mm |
Service weight | 89.0 t |
Adhesive weight | 72.0 t |
Axle load | 18.0 t |
Top speed | 100 km/h |
Indicated Power | 1,750 kW |
Driving wheel diameter | 1,600 mm |
Leading wheel diameter | 1,000 mm |
No. of cylinders | 2 |
Cylinder bore | 600 mm |
Piston stroke | 660 mm |
Boiler Overpressure | 16 bar |
Grate area | 3.76 m² |
Radiative heating area | 25 001: 17.5 m² 25 1001: 20 m² |
Superheater area | 25 001: 61 m² 25 1001: 65.00 m² |
Evaporative heating area | 25 001: 171.8 m² 25 1001: 158.60 m² |
Tender | 25 001: 2'2' T 30 (as 25 1002: 2`2 T28Kst) 25 1001: 2'2' T 27.5 |
Water capacity | 27.5/30.0 m³ (28 m³) |
Fuel | 12 t coal / 18.5 t brown coal dust (10 t coal dust with 2`2 T30) |
The steam locomotives of DR Class 25.10 were passenger train locomotives built for the Deutsche Reichsbahn (DR) in East Germany after the Second World War.
History
The Class 25.10 was developed by the DR in 1954. It was built primarily with heavy passenger trains in mind, but was also intended to handle goods traffic. The first of the two trials locomotives to be manufactured was equipped with a mechanical stoker for lump coal. It was given the operating number 25 001. The second example had coal dust firing and was allocated number 25 1001. Only the coal dust fired vehicle was convincing enough, which resulted in the conversion of the first engine to coal dust firing as well in 1958 and its renumbering to 25 1002. The engines did not go into full production however, because the DR Class 23.10 had been designed and built. The makers were the VEB Lokomotivbau "Karl Marx" in Potsdam-Babelsberg.
The two engines were mainly stationed at Arnstadt, where they hauled passenger trains to Weimar, Saalfeld, Erfurt and Meiningen. For a short time, from 1960 to 1962, the engines were homed at Senftenberg depot. However the numerous cracks in the plate frame often required repair and the locomotives were frequently out of service. The 25.10s were retired as early as 1964 and scrapped at Nordhausen in 1968.
Number 25 1001 was equipped with a coal dust tender of Class 2'2' T 27.5. Number 25 001 had a 2'2' 30 tender, which was replaced in 1958 by the coal dust tender of 44 054, when it was converted to coal dust firing. The locomotive was renumbered to 25 1002.