Edison Engineering Development Program

The Edison Engineering Development Program (EEDP) is one of General Electric's six corporate entry level programs. Focused on engineering, the program aims to "develop technical problem-solving skills through advanced courses in engineering and technical projects that are aligned with business objectives". It is named in honor of GE's founder, Thomas Edison. Typically each GE business runs its own program, and candidates are required to apply for and rotate within the program at a specific business.

EEDP, the oldest of GE's rotational programs for new BS and MS grads, provides three to five assignments (6–8 months each (12 months in GE Aviation)) over two or three years. Assignments are driven by real GE business priorities, which may include working with systems, analysis, design, quality, reliability, integration, and testing. Program members develop and enhance their technical problem-solving skills through advanced engineering course work, reports, and team presentations. Another benefit of EEDP is the opportunity to earn a masters in engineering while in (or shortly upon completion of) the program. EEDP is most popular at the more technical businesses in GE's portfolio, including GE Technology Infrastructure (which includes the Healthcare, Aviation, and Transportation businesses), GE Global Research, and GE Energy Infrastructure (which includes the Wind, Hydroelectric, Solar, and Oil & Gas businesses).

Program Summary

Two or three year entry-level program consisting of at least three rotation assignments
Assignments are engineering projects and may include systems, hardware/software/mechanical design, quality, and validation
First year coursework includes advanced engineering topics to develop technical skills
Second year coursework includes corporate leadership topics to develop business skills
Program members are encouraged (if not required) to earn credit towards an MS degree in Engineering while on program (normally done in the third year of the program)

Candidate Criteria

(from GE's official site)

Passion for technology
Demonstrated academic excellence
Commitment to technology and quality
Strong analytical, problem-solving and communication skills
Engineering degree and relevant internship/co-op experience preferred
Minimum GPA 3.0/4.0

Advanced Course in Engineering

The Advanced Course in Engineering, or ACE, is the official title for the graduate-level coursework undertaken by EEDP members. The ACE is divided into three sections: A Course, B Course, and C Course. Grading is assessed based on homework and/or tests. Homework may consist of problem sets, short reports, or formal reports, and typically requires 20–40 hours of effort per week, which must be completed outside of normal work hours.

During the first year in the program, EEDP participants are required to take GE's engineering "A Course," which is designed to sharpen technical and problem-solving skills. The content of A Course varies by business, but typically includes a collection of topics rooted in technology, math, and science, such as Statistics, Differential Equations, Digital Electronics, Analog Electronics, Software Design, Data Mining, Metallurgy, and Heat Transfer, as well as business-specific engineering, which may include engines, digital imaging, chemistry, and the physics of technologies used in that business' field. Additionally, members participate in GE's esteemed "Foundations of Leadership" course on its Crotonville, NY campus.

The second year in the program, participants are required to take the "B Course," which applies technical skills to actual business proposals. Coursework typically involves technical business fundamentals, such as program management, reliability, Lean manufacturing, design controls, and environmental issues. Additional classes cover modern topics related to the business or its customer base (e.g. current trends in energy, health care, aviation, etc.). Program members will choose a major business project to complete at the conclusion of the program, and then report out to senior management on the benefits generated (cost reductions, use of advanced technologies, etc.).

The third and final part of the ACE program is "C Course," which is a strictly optional course for some businesses. The focus of C Course is a design project related to the enrollee's Masters thesis. Few program members pursue a C Course certificate, but it is considered a top achievement throughout technical roles at GE.

After completion of the ACE program, EEDP engineers will have a number of graduate credits they can transfer to one of several universities (typically universities located near the business, or other top schools available via distance learning) to help complete a master's degree. This allows program participants to earn a Masters or other advanced degree through a number of top schools while still employed by GE and working full-time.

ACE requirements vary from business to business. ACE programs at all GE businesses do not strictly adhere to the above definitions of the A, B, and C Courses.

Rotations

The members taking this course work in a minimum of 2 or 3 fields/teams over a period of 2 to 3 years. These rotations help in bridging the knowledge gap between teams and thus adding value to the organization.

Leadership Trainings

The participants undergo different levels of Management trainings such as "ALJ-Activating your Leadership Journey", eng@ge-engineering @ GE, as well as Six Sigma Green Belt Certification.

External links

General Electric

Subsidiaries and
divisions

Current	GE Capital GE Capital Aviation Services GE Commercial Finance GE Energy Financial Services GE Capital Rail Services (Europe) GE Technology Infrastructure GE Aviation GE Aviation Systems GE Healthcare GE Transportation GE Energy GE Digital Energy GE Jenbacher GE Measurement & Control Solutions GE Oil & Gas GE Power GE Wind Energy GE Wind (offshore) GE Home & Business Solutions GE Intelligent Platforms GE Global Research GE Ventures

Former and defunct	Australian Guarantee Corporation¹ Canadian General Electric¹ Compagnia Generale di Elettricità² Electric Bond and Share Company² GE Americom² GE Aerospace² GE Betz¹ GE Capital IT Solutions² GE Consumer & Industrial GECIS² GE Capital Rail Services² GE Equipment Services¹ GE Industrial¹ GE Infrastructure¹ GEIS² Genesis Lease² GE Security² Genworth Financial² Montgomery Ward² Synchrony Financial² Tungsram¹ Whatman¹

Joint ventures and
shareholdings

Current	CFM International (50%) Engine Alliance (50%) GE Hitachi Nuclear Energy (60%) GE Honda Aero Engines (50%) Penske Truck Leasing Prolec GE (49.99%) TBS GB

Former	Alco-GE (1940–53) NBC (1926–30, 1986–2004) NBCUniversal, LLC (2004–13)

Products and brands

People

Founders	Charles A. Coffin Thomas Edison Edwin J. Houston J. P. Morgan Elihu Thomson

Other	James Cash Jr. Ann Fudge Susan Hockfield Jeffrey R. Immelt Andrea Jung Rochelle Lazarus Sam Nunn Roger Penske Douglas A. Warner III Jack Welch Bob Wright

Places and facilities

Other

¹Now integrated into other GE divisions or business groupings
²Sold or spun off

Category
Commons

This article is issued from Wikipedia - version of the 7/2/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.