Furness Railway K2
Furness Railway K2 class
| Type and origin |
|---|
| Power type |
Steam |
|---|
| Designer |
W. F. Pettigrew |
|---|
| Builder |
Sharp, Stewart and Company |
|---|
| Serial number |
4174–4179, 4651–4652 |
|---|
| Build date |
1896 (6), 1900 (2) |
|---|
| Total produced |
8 |
|---|
|
| Specifications |
|---|
| Configuration |
4-4-0 |
|---|
| UIC class |
2′B |
|---|
| Gauge |
4 ft 8 1⁄2 in (1,435 mm) standard gauge |
|---|
| Driver dia. |
6 ft 0 in (1.829 m) |
|---|
| Length |
48 ft 6 in (14.78 m) |
|---|
| Loco weight |
41 long tons 6 cwt (92,500 lb or 42 t)
41 long tons 6 hundredweight (42.0 t; 46.3 short tons) |
|---|
| Tender weight |
28 long tons 5 cwt (63,300 lb or 28.7 t)
28 long tons 5 hundredweight (28.7 t; 31.6 short tons) |
|---|
| Fuel type |
Coal |
|---|
| Fuel capacity |
3 long tons 10 cwt (7,800 lb or 3.6 t)
3 long tons 10 hundredweight (3.6 t; 3.9 short tons) |
|---|
| Water cap |
2,500 imp gal (11,000 l; 3,000 US gal) |
|---|
| Boiler pressure |
150 lbf/in2 (1.03 MPa) |
|---|
| Cylinders |
Two |
|---|
| Cylinder size |
18 in × 24 in (457 mm × 610 mm) |
|---|
| Valve gear |
Stephenson |
|---|
|
|
|
| Career |
|---|
| Operators |
FR » LMS |
|---|
| Class |
FR: 21 class ("K2") |
|---|
| Power class |
LMS: 1P |
|---|
| Numbers |
FR: 21–22, 34–35 (renumbered 44–47) 36–37, 124–125;
LMS: 10135–10142 |
|---|
| Withdrawn |
1929–1931 |
|---|
| Disposition |
All scrapped |
|---|
|
The Furness Railway 21 class (classified "K2" by Bob Rush)[1] or "Larger Seagulls", were built a class of eight 4-4-0 steam locomotives designed by W. F. Pettigrew and built by Sharp, Stewart and Company of Glasgow for the Furness Railway. Six were built in 1896, and two more in 1900. They were built to supersede the 120 class on the heavier and more important trains. They had 6-foot-0-inch (1.829 m) diameter driving wheels with 18-by-24-inch (457 mm × 610 mm) cylinders.
Numbering
The first six of 1896 were numbered 21, 22, 34, 35, 36 and 37 by the Furness Railway (works numbers were 4174–4179). In 1900, two extra engines were added to the class, Furness Railway numbers 124–125. (works numbers 4651–4652). In 1913, two engines, FR Nos. 34 and 37, were fitted with experimental Phoenix smokebox superheaters, however, these were removed the following year. At some point in time locomotives 21, 22, 34 and 35 were renumbered 44–47 respectively.
By 1923 and the grouping of the FR into the London, Midland and Scottish Railway, all eight engines were still in service, and received LMS numbers, these being 10135–10142 (in order of their later numbers). They lasted until the late 1920s and early 1930s, performing secondary duties on the home turf, between Barrow-in-Furness and Whitehaven.
Tenders
The six-wheeled tenders that this class used were also used by the Furness Railway D3 0-6-0 tender engines. They carried 2,500 imperial gallons (11,000 l; 3,000 US gal) of water and 3.5 long tons (3.6 tonnes) of coal, their weight being 28.25 long tons (28.70 tonnes).
See also
References
Bibliography
- Casserley, H. C. & Johnston, Stuart W. (1974) [1966]. Locomotives at the Grouping 3: London, Midland and Scottish Railway. Shepperton, Surrey: Ian Allan. p. 103. ISBN 0-7110-0554-0.