Great Western Railway telegraphic codes

A telegraphic code painted on a Mogo (Motor car goods van)

Great Western Railway telegraphic codes were a commercial telegraph code used to shorten the telegraphic messages sent between the stations and offices of the railway.

The codes listed below are taken from the 1939 edition of the Telegraph Message Code book[1] unless stated otherwise.

History

The Great Western Railway (GWR) pioneered telegraph communication over the 13 miles (21 km) from Paddington to West Drayton on 9 April 1839 using Cooke and Wheatstone equipment. Although this early system fell into disuse after a few years, from 1850 a new contract with the Electric Telegraph Company saw double-needle telegraphs working at most stations on the line; these were replaced by single-needle machines from 1860.[2] Although used primarily as a safety device to regulate the passage of trains, it was also used to pass messages between the staff. In order to do this quickly and accurately, a number of code words were used to replace complicated or regularly used phrases. The codes were changed from time to time to reflect current needs.

By 1922 most railways in the country had agreed on standard code words, although the GWR had an extended list of codes that could only be used within its own network. In 1943 all railways were brought into a single system of codes and the GWR special codes were discontinued.[3]

Wagons

Note: many of these codes could have an extra letter to identify variations, such as Mink A (a 16 ft (4.9 m) ventilated van), or Mink G (a 21 ft (6.4 m) ordinary van). Most of these codes were painted onto the wagons for easy identification.

Cone
Macaw
Mite

Carriages

Note: many of these codes could have an extra letter to identify variations, such as Scorpion C (a 45 ft (14 m) carriage truck), or Scorpion D (a 21 ft (6.4 m) carriage truck).

Chub

Standard phrases

The 1939 Telegraph Message Code book contains in excess of 900 code words (around half of which were standard codes also used by other railways) yet very few were the familiar codes seen painted on the side of goods wagons.[1] By using these codes long and complex sentences could be sent using just a few words. Some examples of the codes representing phrases include:

See also

References

  1. 1 2 Great Western Railway (1939) Telegraph Message Code
  2. MacDermot, E T (1927). History of the Great Western Railway. 1 (1833-1863) (1 ed.). London: Great Western Railway.
  3. 1 2 3 4 5 Atkins, AG; et al. (1975). A History of GWR Goods Wagons. 1. Newton Abbot: David & Charles. ISBN 0-7153-6532-0.
  4. Slinn, Jack (1978). Great Western Way. Frome: Historical Model Railway Society. ISBN 0-902835-03-3.
This article is issued from Wikipedia - version of the 10/16/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.