Guncrafter Industries Model No. 1

Caliber .50 GI, Model No 1.

A Model No. 1 handgun with a spare magazine and two .50 GI rounds
Type Pistol
Place of origin  United States
Production history
Designer Vic Tibbets
Manufacturer Guncrafter Industries
Variants Model No. 2, Model No. 3, M1911
Specifications
Weight 2.5 pounds lb (1,134 g)
Length 8.5 in (216 mm)
Barrel length 5 in (127 mm)
Cartridge .50 GI
Action Locked breech, semi-auto
Rate of fire Semi-automatic
Muzzle velocity 875 ft/s (267 m/s)
Effective firing range 75 yd (62 m) (FM 23–35 of 1940)
Feed system 7 rounds (standard-capacity magazine)
Sights Heinie, fixed, 3-dot Trijicon

The Guncrafter Industries Model No. 1 (Or M1) is a variant of the widely popular M1911 handgun, modified for the .50 GI cartridge. John Browning's 1911 .45 ACP has been used for many cartridges over the past century. In every instance the cartridge used a bullet with a diameter that was the same or smaller than the original .451". Both the Desert Eagle and the LAR Grizzly have been offered in cartridges of .50 caliber. Both are large cartridges requiring a large, heavy pistol.

The Model No. 1 is basically an M1911 with external dimensions the same as a standard 1911, however it fires a .50 GI round. Although the Model No. 1 is the same size externally, the slide will not fit on a standard 1911 frame as other modifications have been made to accept the .50 GI barrel and slide. However, it is possible to convert the Model No. 1 to .45 ACP, as a .45 ACP conversion unit is available for the .50 GI frame.

The .50 GI is not in the magnum class and works at the same pressures as the .45 ACP. The cartridge uses the same rim size as the .45 ACP and a .45 shell holder can be used for reloading. This new brass is made by Starline Brass and is slightly shorter than a standard .45 ACP. The magazine well in the grip frame has thinner walls than a standard M1911 to accommodate the .50 GI's wider magazine, and the flame feed ramp is contoured with a more open radius for the larger-diameter .50-caliber bullet. Both are machined from heat-treated forgings, and the Model No. 1's hammer and sear are machined from tool steel.

Model No. 2

In 2006, Guncrafter Industries introduced its 1911 Model No. 2, which sports a full length light rail/dust cover and is chambered for the .50 GI cartridge. Both the M1 and the M2 can be fitted with Guncrafter Industries' .45 ACP conversion unit, the .45 ACP magazines hold 8+1 rounds.

Model No. 3

Guncrafter Industries introduced a smaller version of Model No. 1 in 2010. The Model No. 3 is a Colt Commander-sized 1911 also chambered for .50 GI, with a shorter barrel but with a full-length grip. The M3 can also be fitted with a model-specific version of the company's .45 ACP conversion unit. Like its bigger siblings, the M3 magazines hold 7+1 rounds of .50 GI and 8+1 rounds of .45 ACP.

See also

References

External links

This article is issued from Wikipedia - version of the 12/19/2014. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.