High-dynamic-range imaging

"HDRI" redirects here. For the form of iron, see Direct reduced iron.
Tone mapped high-dynamic-range (HDR) image of St. Kentigerns Roman Catholic Church in Blackpool, Lancashire, England, UK

High-dynamic-range imaging (HDRI) is a high dynamic range (HDR) technique used in imaging and photography to reproduce a greater dynamic range of luminosity than is possible with standard digital imaging or photographic techniques. The aim is to present a similar range of luminance to that experienced through the human visual system. The human eye, through adaptation of the iris and other methods, adjusts constantly for the broad range of luminance present in the environment. The brain continuously interprets this information so that a viewer can see in a wide range of light conditions.

HDR images can represent a greater range of luminance levels than can be achieved using more 'traditional' methods, such as many real-world scenes containing very bright, direct sunlight to extreme shade, or very faint nebulae. This is often achieved by capturing and then combining several different narrower range exposures of the same subject matter.[1][2][3][4] Non-HDR cameras take photographs with a limited exposure range, resulting in the loss of detail in highlights or shadows.

The two primary types of HDR images are computer renderings and images resulting from merging multiple low-dynamic-range (LDR)[5] or standard-dynamic-range (SDR)[6] photographs. HDR images can also be acquired using special image sensors, like an oversampled binary image sensor.

Due to the limitations of printing and display contrast, acquiring an HDR image is only half the story; one must also develop methods of displaying the results. The method of rendering an HDR image to a standard monitor or printing device is called tone mapping. This method reduces the overall contrast of an HDR image to facilitate display on devices or printouts with lower dynamic range, and can be applied to produce images with preserved or exaggerated local contrast for artistic effect.

HDR lenses are currently being developed by Ricoh-Imaging. Current applications include prototype lenses being trialled on the international space station. Further developments include consumer lenses for use in low light conditions such as night driving. These HDR lenses combine a laminate of borosilicate carbide and polarizing films to actively refine the intensity of various wavelengths of light, which results in a higher dynamic range image seen by the eye.

Photography

In photography, dynamic range is measured in exposure value (EV) differences (known as stops). An increase of one EV, or 'one stop', represents a doubling of the amount of light. Conversely, a decrease of one EV represents a halving of the amount of light. To reveal detail in the darkest shadow requires high exposures. Inversely, to prevent 'bleaching out' of detail in very bright areas, one must choose very low exposures. Most cameras cannot provide this range of exposure values within a single exposure, due to their low dynamic range.

Dynamic ranges of common devices
Device Stops Contrast
LCD 9.5 700:1 (250:1 – 1750:1)
Negative film (Kodak VISION3) 13[7] 8000:1
Human eye (static) 10–14[8] 1000:1 – 15000:1
High-end DSLR camera (Nikon D810) 14.8[9] 28500:1
Human eye (dynamic) 20 1000000:1

High-dynamic-range photographs are generally achieved by capturing multiple standard exposure images, often using exposure bracketing, and then later, merging them (usually within a photo manipulation program) into a single HDR image. Digital images are often encoded in a camera's raw image format, because 8 bit JPEG encoding doesn't offer a great enough range of values to allow fine transitions (and regarding HDR, later introduces undesirable effects due to lossy compression).

Any camera that allows manual exposure control can make images for HDR work, although one equipped with auto exposure bracketing (AEB) is far better suited. Images from film cameras are less suitable as they often must be digitized first, so that they can later be processed using software HDR methods.

In most imaging devices, the degree of exposure to light applied to the active element (be it film or CCD) can be altered in one of two ways; by either increasing/decreasing the size of the aperture or by increasing/decreasing the time of each exposure. Exposure variation in an HDR set is only done by altering the exposure time and NOT the aperture size; this is because altering the aperture size also affects the depth of field and so the resultant multiple images would be quite different, preventing their final combination into a single HDR image.

An important limitation for HDR photography is that any movement between successive images will impede or prevent success in combining them afterwards. Also, as one must create several images (often three or five-sometimes more) to obtain the desired luminance range. Such a full 'set' of images takes extra time. HDR photographers have developed calculation methods and techniques to partially overcome these problems, but the use of a sturdy tripod at least is advised.

Some cameras have an auto exposure bracketing (AEB) feature with a far greater dynamic range than others, from the 3 EV of the Canon EOS 40D, to the 18 EV of the Canon EOS-1D Mark II.[10] As the popularity of this imaging method grows, several camera manufactures are now offering built-in HDR features. For example, the Pentax K-7 DSLR has an HDR mode that captures an HDR image and outputs (only) a tone mapped JPEG file.[11] The Canon PowerShot G12, Canon PowerShot S95 and Canon PowerShot S100 offer similar features in a smaller format.[12] Some smartphones provide HDR modes, and most mobile platforms have apps that provide HDR picture taking.[13]

Camera characteristics such as gamma curves, sensor resolution, noise, photometric calibration and color calibration affect resulting high-dynamic-range images.[14]

Color film negatives and slides consist of multiple film layers that respond to light differently. As a consequence, transparent originals (especially positive slides) feature a very high dynamic range.[15]

Tone mapping

Main article: Tone mapping

Tone mapping reduces the dynamic range, or contrast ratio, of an entire image while retaining localized contrast. Although it is a distinct operation, tone mapping is often applied to HDRI files by the same software package.

Several software applications are available on the PC, Mac and Linux platforms for producing HDR files and tone mapped images. Notable titles include

Comparison with traditional digital images

Information stored in high-dynamic-range images typically corresponds to the physical values of luminance or radiance that can be observed in the real world. This is different from traditional digital images, which represent colors that should appear on a monitor or a paper print. Therefore, HDR image formats are often called scene-referred, in contrast to traditional digital images, which are device-referred or output-referred. Furthermore, traditional images are usually encoded for the human visual system (maximizing the visual information stored in the fixed number of bits), which is usually called gamma encoding or gamma correction. The values stored for HDR images are often gamma compressed (power law) or logarithmically encoded, or floating-point linear values, since fixed-point linear encodings are increasingly inefficient over higher dynamic ranges.[16][17][18]

HDR images often don't use fixed ranges per color channel—other than for traditional images—to represent many more colors over a much wider dynamic range. For that purpose, they don't use integer values to represent the single color channels (e.g., 0-255 in an 8 bit per pixel interval for red, green and blue) but instead use a floating point representation. Common are 16-bit (half precision) or 32-bit floating point numbers to represent HDR pixels. However, when the appropriate transfer function is used, HDR pixels for some applications can be represented with a color depth that has as few as 10–12 bits for luminance and 8 bits for chrominance without introducing any visible quantization artifacts.[16][19]

History of HDR photography

Mid-nineteenth century

Photo by Gustave Le Gray

The idea of using several exposures to fix a too-extreme range of luminance was pioneered as early as the 1850s by Gustave Le Gray to render seascapes showing both the sky and the sea. Such rendering was impossible at the time using standard methods, the luminosity range being too extreme. Le Gray used one negative for the sky, and another one with a longer exposure for the sea, and combined the two into one picture in positive.[20]

Mid-twentieth century

External image
Schweitzer at the Lamp, by W. Eugene Smith[21][22]

Manual tone mapping was accomplished by dodging and burning – selectively increasing or decreasing the exposure of regions of the photograph to yield better tonality reproduction. This is effective because the dynamic range of the negative is significantly higher than would be available on the finished positive paper print when that is exposed via the negative in a uniform manner. An excellent example is the photograph Schweitzer at the Lamp by W. Eugene Smith, from his 1954 photo essay A Man of Mercy on Dr. Albert Schweitzer and his humanitarian work in French Equatorial Africa. The image took 5 days to reproduce the tonal range of the scene, which ranges from a bright lamp (relative to the scene) to a dark shadow.[22]

Ansel Adams elevated dodging and burning to an art form. Many of his famous prints were manipulated in the darkroom with these two methods. Adams wrote a comprehensive book on producing prints called The Print, which prominently features dodging and burning, in the context of his Zone System.

With the advent of color photography, tone mapping in the darkroom was no longer possible due to the specific timing needed during the developing process of color film. Photographers looked to film manufacturers to design new film stocks with improved response, or continued to shoot in black and white to use tone mapping methods.

Exposure/Density Characteristics of Wyckoff's Extended Exposure Response Film

Color film capable of directly recording high-dynamic-range images was developed by Charles Wyckoff and EG&G "in the course of a contract with the Department of the Air Force".[23] This XR film had three emulsion layers, an upper layer having an ASA speed rating of 400, a middle layer with an intermediate rating, and a lower layer with an ASA rating of 0.004. The film was processed in a manner similar to color films, and each layer produced a different color.[24] The dynamic range of this extended range film has been estimated as 1:108.[25] It has been used to photograph nuclear explosions,[26] for astronomical photography,[27] for spectrographic research,[28] and for medical imaging.[29] Wyckoff's detailed pictures of nuclear explosions appeared on the cover of Life magazine in the mid-1950s.

Late-twentieth century

Georges Cornuéjols and licensees of his patents (Brdi, Hymatom) introduced the principle of HDR video image, in 1986, by interposing a matricial LCD screen in front of the camera's image sensor,[30][31] increasing the sensors dynamic by 5 stops. The concept of neighborhood tone mapping was applied to video cameras by a group from the Technion in Israel led by Dr. Oliver Hilsenrath and Prof. Y.Y.Zeevi who filed for a patent on this concept in 1988.[32]

In February and April 1990, Georges Cornuéjols introduced the first real time HDR camera combining two images captured by a sensor[33][34] or simultaneously[35][36] by two sensors of the camera. This process is known as bracketing used for a video stream.

In 1991 the first commercial video camera was introduced that performed real time capturing of multiple images with different exposures, and producing an HDR video image, by Hymatom, licensee of Georges Cornuéjols.

Also in 1991, Georges Cornuéjols introduced the HDR+ image principle by non-linear accumulation of images to increase the sensitivity of the camera:[37] for low-light environments, several successive images are accumulated, thus increasing the signal to noise ratio.

In 1993, another commercial medical camera producing an HDR video image, by the Technion.[38]

Modern HDR imaging uses a completely different approach, based on making a high-dynamic-range luminance or light map using only global image operations (across the entire image), and then tone mapping this result. Global HDR was first introduced in 1993[1] resulting in a mathematical theory of differently exposed pictures of the same subject matter that was published in 1995 by Steve Mann and Rosalind Picard.[2]

On October 28, 1998, Ben Sarao created one of the first night time HDR+G (High Dynamic Range + Graphic image)of STS-95 on the launch pad at NASA's Kennedy Space Center. It consisted of four film images of the shuttle at night in that were digitally composited with additional digital graphic elements. The image was first exhibited at NASA Headquarters Great Hall, Washington DC in 1999 and then published in Hasselblad Forum, Issue 3 1993, Volume 35 ISSN 0282-5449.[39]

The advent of consumer digital cameras produced a new demand for HDR imaging to improve the light response of digital camera sensors, which had a much smaller dynamic range than film. Steve Mann developed and patented the global-HDR method for producing digital images having extended dynamic range at the MIT Media Laboratory.[40] Mann's method involved a two-step procedure: (1) generate one floating point image array by global-only image operations (operations that affect all pixels identically, without regard to their local neighborhoods); and then (2) convert this image array, using local neighborhood processing (tone-remapping, etc.), into an HDR image. The image array generated by the first step of Mann's process is called a lightspace image, lightspace picture, or radiance map. Another benefit of global-HDR imaging is that it provides access to the intermediate light or radiance map, which has been used for computer vision, and other image processing operations.[40]

Twenty-first century

In 2005, Adobe Systems introduced several new features in Photoshop CS2 including Merge to HDR, 32 bit floating point image support, and HDR tone mapping.[41]

On June 30, 2016, Microsoft added support for the digital compositing of HDR images to Windows 10 using the Universal Windows Platform.[42]

Examples

HDR Processing

This is an example of four standard dynamic range images that are combined to produce two resulting tone mapped images.

Original images
Results after processing

HDR Anomalies

This fast moving subject captured by an Apple iPhone 6 benefited from HDR by exposing both the shaded grass and the bright sky. However, the merging of images from a fast moving golf swing lead to a ghost effect.

HDR sensors

Modern CMOS image sensors can often capture a high dynamic range from a single exposure. The wide dynamic range of the captured image is non-linearly compressed into a smaller dynamic range electronic representation.[43] However, with proper processing, the information from a single exposure can be used to create a HDR image.

Such HDR imaging is used in extreme dynamic range applications like welding or automotive work. Some other cameras designed for use in security applications can automatically provide two or more images for each frame, with changing exposure. For example, a sensor for 30fps video will give out 60fps with the odd frames at a short exposure time and the even frames at a longer exposure time. Some of the sensor may even combine the two images on-chip so that a wider dynamic range without in-pixel compression is directly available to the user for display or processing.

See also

Wikimedia Commons has media related to Tone-mapped HDR images.

References

  1. 1 2 "Compositing Multiple Pictures of the Same Scene", by Steve Mann, in IS&T's 46th Annual Conference, Cambridge, Massachusetts, May 9–14, 1993
  2. 1 2 S. Mann; R. W. Picard. "On Being 'Undigital' With Digital Cameras: Extending Dynamic Range By Combining Differently Exposed Pictures" (PDF).
  3. ↑ Reinhard, Erik; Ward, Greg; Pattanaik, Sumanta; Debevec, Paul (2005). High dynamic range imaging: acquisition, display, and image-based lighting. Amsterdam: Elsevier/Morgan Kaufmann. p. 7. ISBN 978-0-12-585263-0. Images that store a depiction of the scene in a range of intensities commensurate with the scene are what we call HDR, or "radiance maps". On the other hand, we call images suitable for display with current display technology LDR.
  4. ↑ Banterle, Francesco; Artusi, Alessandro; Debattista, Kurt; Chalmers, Alanl (2011). Advanced High dynamic Range Imaging: theory and practiceg. AK Peters/CRC Press. ISBN 978-156881-719-4.
  5. ↑ Cohen, Jonathan and Tchou, Chris and Hawkins, Tim and Debevec, Paul E. (2001). Steven Jacob Gortler; Karol Myszkowski, eds. "Real-Time High Dynammic Range Texture Mapping". Proceedings of the 12th Eurographics Workshop on Rendering Techniques. Springer: 313–320. ISBN 3-211-83709-4.
  6. ↑ Vassilios Vonikakis; Ioannis Andreadis (2008). "Fast automatic compensation of under/over-exposured image regions". In Domingo Mery; Luis Rueda. Advances in image and video technology: Second Pacific Rim Symposium (PSIVT) 2007, Santiago, Chile, December 17–19, 2007. p. 510. ISBN 978-3-540-77128-9.
  7. ↑ "Dynamic Range".
  8. ↑ "Dynamic Range in Digital Photography". Retrieved 2010-12-30.
  9. ↑ "Camera Sensor Ratings by DxOMark". DxO Labs. Retrieved February 2, 2015.
  10. ↑ "Auto Exposure Bracketing by camera model". Retrieved 18 August 2009.
  11. ↑ "The Pentax K-7: The era of in-camera High Dynamic Range Imaging has arrived!". Retrieved 18 August 2009.
  12. ↑ "Canon PowerShot G12 picks up HD video recording, built-in HDR".
  13. ↑ HDR apps for Android Google Play
  14. ↑ Asla M. Sá; Paulo Cezar Carvalho; Luiz Velho (2007). High Dynamic Range (First ed.). Focal Press. p. 11. ISBN 978-1-59829-562-7.
  15. ↑ "Learn about Dynamic Range". photo.net. Retrieved 2011-10-19.
  16. 1 2 Greg Ward; Anyhere Software. "High Dynamic Range Image Encodings".
  17. ↑ "The Radiance Picture File Format". Retrieved 2009-08-21.
  18. ↑ Fernando, Randima (2004). "26.5 Linear Pixel Values". GPU Gems. Boston: Addison-Wesley. ISBN 0-321-22832-4.
  19. ↑ Max Planck Institute for Computer Science. "Perception-motivated High Dynamic Range Video Encoding".
  20. ↑ J. Paul Getty Museum. Gustave Le Gray, Photographer. July 9 – September 29, 2002. Retrieved September 14, 2008.
  21. ↑ The Future of Digital Imaging – High Dynamic Range Photography, Jon Meyer, Feb 2004
  22. 1 2 4.209: The Art and Science of Depiction, Frédo Durand and Julie Dorsey, Limitations of the Medium: Compensation and accentuation – The Contrast is Limited, lecture of Monday, April 9. 2001, slide 57–59; image on slide 57, depiction of dodging and burning on slide 58
  23. ↑ US 3450536, Wyckoff, Charles W. & EG&G Inc., assignee, "Silver Halide Photographic Film having Increased Exposure-response Characteristics", published March 24, 1961, issued June 17, 1969
  24. ↑ C. W. Wyckoff. Experimental extended exposure response film. Society of Photographic Instrumentation Engineers Newsletter, June–July, 1962, pp. 16-20.
  25. ↑ Michael Goesele, et al., "High Dynamic Range Techniques in Graphics: from Acquisition to Display", Eurographics 2005 Tutorial T7
  26. ↑ The Militarily Critical Technologies List (1998), pages II-5-100 and II-5-107.
  27. ↑ Andrew T. Young and Harold Boeschenstein, Jr., Isotherms in the region of Proclus at a phase angle of 9.8 degrees, Scientific Report No. 5, Harvard, College Observatory: Cambridge, Massachusetts, 1964.
  28. ↑ Bryant, R. L.; Troup, G. J.; Turner, R. G. (1965). "The use of a high-intensity-range photographic film for recording extended diffraction patterns and for spectrographic work". Journal of Scientific Instruments. 42 (2): 116. doi:10.1088/0950-7671/42/2/315.
  29. ↑ Eber, Leslie M.; Greenberg, Haervey M.; Cooke, John M.; Gorlin, Richard (1969). "Dynamic Changes in Left Ventricular Free Wall Thickness in the Human Heart". Circulation. 39 (4): 455–464. doi:10.1161/01.CIR.39.4.455.
  30. ↑ "Image processing device for controlling the transfer function of an optical system". espacenet.com.
  31. ↑ "Image processing device for controlling the transfer function of an optical system". espacenet.com.
  32. ↑ US granted 5144442, Ginosar, R., Hilsenrath, O., Zeevi, Y., "Wide dynamic range camera", published 1992-09-01
  33. ↑ "Device for increasing the dynamic range of a camera".
  34. ↑ "Device for increasing the dynamic range of a camera". espacenet.com.
  35. ↑ "Camera with very wide dynamic range". espacenet.com.
  36. ↑ "Camera with very wide dynamic range". espacenet.com.
  37. ↑ "Device for increasing the dynamic range of a camera, column 5 of the published patent application". espacenet.com.
  38. ↑ Technion – Israel Institute of Technology (1993). "Adaptive Sensitivity".
  39. ↑ B. M. Sarao (1999). S. Gunnarsson, ed. Ben Sarao, Trenton, NJ. Hasselblad Forum. 35. ISSN 0282-5449.
  40. 1 2 US application 5828793, Steve Mann, "Method and apparatus for producing digital images having extended dynamic ranges", published 1998-10-27
  41. ↑ "Merge to HDR in Photoshop CS2". Retrieved 2009-08-27.
  42. ↑ Kareem Anderson (2016-06-30). "Microsoft talks up the advantages of HDR photography and videography in Universal Windows Platform apps". winbeta.org. Retrieved 2016-09-24.
  43. ↑ Arnaud Darmont (2012). High Dynamic Range Imaging: Sensors and Architectures (First ed.). SPIE press. ISBN 978-0-81948-830-5.
This article is issued from Wikipedia - version of the 12/3/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.