Homoclinal ridge

A homoclinal ridge or strike ridge is a hill or ridge with a moderate, generally between 10° to 30°, sloping backslope. Its backslope is a dip slope, that conforms with the dip of a resistant stratum or strata, called caprock. On the other side of The other slope, which is its frontslope, of a homoclinal ridge is a steeper or even cliff-like frontslope (escarpment) that is formed by the outcrop of the caprock. The escarpment cuts through the dipping strata that comprises the homoclinal ridge.[1][2][3][4]

Homoclinal ridges are the expression of regional outcrops of moderately dipping strata, typically sedimentary strata, that consist of alternating beds of hard, well-lithified strata, i.e. sandstone and limestone and weak or loosely cemented strata, i.e. shale, mudstone, and marl. The surface of hard, erosion-resistant rock strata forms the caprock of the backslope (dip-slope) of the homoclinal ridges from which erosion has preferentially stripped any weaker strata. The opposite slope, its frontslope, that forms the front of a homoclinal ridge consists of an escarpment that cuts across the bedding of the strata comprising it. Because of the moderately dipping nature of the strata that forms a homoclinal ridge, a significant shift in horizontal location will take place the landscape is lowered by erosion.[1][2][4][5] Because the slope of a homoclinal ridge dips in the same direction as the sedimentary strata underlying it, the dip angle of this bedding (Ө) can be calculated by v/h= tan(Ө) where v is equal to the vertical distance and h is equal to the horizontal distance perpendicular to the strike of the beds.[6]

Cuestas, homoclinal ridges, and hogbacks comprise a sequence of landforms that form a gradational continuum. These landform differ only on the steepness of their backslopes and relative differences in the inclination of their backslopes and frontslopes. These differences depends upon whether the dip of the strata from which they have been eroded are either nearly vertical, moderately dipping, or gently dipping. In general, homoclinal ridges, or strike ridges, are associated with strata that dip between 10° and 30°. The symmetrical ridges that characterize hogbacks develop where the strata dip very steeply at 40° or more. Because they are gradational in nature, the exact angle of the backslope used to define these landforms is arbitrary and can vary in the scientific literature.[2][3][4][5][7]

References

  1. 1 2 Cotton, CA (1952) Geomorphology An Introduction to the Study of Landforms. John Wiley and Sons, New York. 505 pp.
  2. 1 2 3 Simonett, SD (1968) Cuesta. In RW Fairbridge, ed., pp. 233, The Encyclopedia of Geomorphology (Encyclopedia of Earth Sciences, Volume III), Reinhold, New York, 1296 pp. ISBN 978-0879331795
  3. 1 2 Huggett, JR (2011) Fundamentals of Geomorphology, 3rd ed., Routledge, New York. 516 pp. ISBN 978-0415567756
  4. 1 2 3 Twidale, CR, and EM Campbell (1993) Australian Landforms: Structure, Process and Time. Gleneagles Publishing, Adelaide, South Australia, Australia. 568 pp. ISBN 9781875553020
  5. 1 2 Thornbury, W. D., 1954, "Principles of Geomorphology New York, John Wiley & Sons, 618 pp.
  6. Easterbrook, DJ (1999) Surface Processes and Landforms, 2nd ed. Prentice-Hall, Inc, Upper Saddle River, New Jersey.
  7. Fairbridge, RW (1968) Hogback and Flatiron. In RW Fairbridge, ed., pp. 524-525, The Encyclopedia of Geomorphology (Encyclopedia of Earth Sciences, Volume III), Reinhold, New York, 1296 pp. ISBN 978-0879331795
This article is issued from Wikipedia - version of the 9/20/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.