Jean-Antoine Lépine

Jean-Antoine Lépine
Born (1720-11-18)November 18, 1720
Challex, France
Died May 31, 1814(1814-05-31) (aged 93)
Paris, France
Resting place Paris
Occupation Horologist, Inventor
Notable work Lépine calibre, etc.
Spouse(s) Madeleine-François Caron
Children Pauline Lépine
Parent(s) Philibert Depigny and Marie Girod

Jean-Antoine Lépine (L’Pine, LePine, Lepine, L’Epine), born as Jean-Antoine Depigny, was an influential watchmaker. He contributed inventions which are still used in watchmaking today and was amongst the finest French watchmakers, who were contemporary world leaders in the field.[1]

Beginnings and appointment as clockmaker to the King

Since his childhood the horologist showed an inclination towards mechanical, beginning his horological career and making fast progress, in particular, under the direction of Mr. Decroze, manufacturer of Saconnex watches,[2] in the suburbs of Geneva (Switzerland).

He moved to Paris in 1744 when he was 24 years of age, serving as apprentice to André-Charles Caron (1698–1775), at that time clockmaker to Louis XV. In 1756 he married to Caron's daughter and associated with him, under "Caron et Lépine", between 1756 and 1769.[3] Watches with a signature Caron et Lépine or equivalent are not known; apparently Lépine was independent to a certain extent. As early watches were not numbered, it is uncertain when Lépine began to sign watches with Lépine à Paris on the movement and partially L'Epine à Paris on the dial.

On the 12 of March 1762, he became maître horloger (master horologist) and probably since that year he was teacher of Abraham-Louis Breguet, to whom he had a business relation over many years. In the Breguet archive many watches are recorded as delivered by Lépine.

In 1765 or 1766 (precise date not known), he was appointed Horloger du Roi (Clockmaker to the King).

In 1766 he succeeded Caron, and appeared on the list of Paris clockmakers of that year as Jean-Antoine Lépine, Hger du Roy, rue Saint Denis, Place Saint Eustache. Ten years later, in 1772, he established himself in the Place Dauphine; in 1778-1779, Quai de l’Horloge du Palais; then in the rue des Fossés Saint Germain l’Auxerrois near the Louvre in 1781; and finally at 12 Place des Victoires in 1789. In 1782, his daughter Pauline married one of his workmen, Claude-Pierre Raguet (1753–1810), with whom he formed a partnership in 1792.[4]

He was also associated for a certain period with the philosopher Voltaire, at his watch manufactory set up in 1770 at Ferney. It is not known the exact role he played in the Ferney Manufacture royale, either technical director and/or associate. However, most ebauches for his watches were made there, at least between 1778 and 1782. An unsigned memoir of 1784 reports that Lépine stayed in Ferney for 18 months and that he had watch movements made there with a value of 90,000 livres a year.[5]

As a clock and watchmaker to Louis XV, Louis XVI and Napoleon Bonaparte, Lépine’s creations were well respected and in demand.[6]

1764/65: Invention of the revolutionary Lépine calibre

Around 1764/65, he devised a means of manufacturing a pocket watch that could be thinner, favouring the onward quest for further miniaturization. His radical design broke with a 300-year tradition and ushered in the age of precision timekeeping, the modern pocket watch was born.[7]

In addition to paving the way for the making of even thinner watches, this innovation was readily adaptable as the basic model for mass-producing watch-movements, a process that was to begin in the nineteenth century. Up to the 1840s, watches were all hand-finished, so that parts were not interchangeable. The Swiss, Leschot in particular, believed there was a market for cheaper, machine made watches with interchangeable parts.[8] Refusing the incipient industrialization, French watch making only survived by becoming a peripheral adjunct to the Swiss watch making powerhouse, with only a few isolated Parisian cabinotiers still making truly French watches with French movements.[9]

The usual practice in the 18th century was to have the movement between two parallel plates and the balance wheel outside the top plate. The Lépine calibre discarded the top plate altogether and used individual cocks mounted on a single plate. This arrangement made it easier to assemble and repair the pocket watches, but also allowed the balance to be set to one side.

Essentially, the "Lépine calibre" or "calibre à pont", served to reduce a watch’s thickness. To do this, it exchanged the traditional frame with two bottom plates for a single plate onto which the train is fixed with independent bridges. It also removed the fusee and its chain and then began using the cylinder escapement. He also invented the floating mainspring going barrel.

The Lépine calibre uses bars and bridges instead of pillars and upper plates. As mentioned, the movement has no fusee which equalizes the driving power transmitted to the train, replaced instead by a going barrel to drive the train directly. This improvement was facilitated by using the cylinder escapement and enhanced springs.

The calibre was quickly adopted throughout France and today its basic design is what characterizes all mechanical watches. It is important to note that the term "Lépine" can refer to both the calibre itself or a type of pocket watch with a flat, open-faced case in which the second wheel is placed in the axis of the winder shaft and the crown positioned at XII,[10] in opposition to the savonete (or hunter-case) watch where the second wheel and winder shaft are placed on perpendicular axes and the crown at III. This design has been known within the watch industry as the Lépine style ever since.[11]

Lépine's work profoundly influenced all subsequent watchmaking, particularly Abraham Louis Breguet who used a modified version of the "calibre ponts" for his ultra slim watches. Indeed, except from the very start of his career the celebrated and extremely well known Breguet almost always used Lépine calibres and then modified them. Along with Ferdinand Berthoud Lépine was master of Breguet.[12]

Other improvements and inventions

Throughout his career Lépine contributed with other important inventions[13] such as:

Legacy

In 1793–94 Lépine, when his tired eyes did not let him to work further, handed over the "Maison Lépine" to his son-in-law Claude-Pierre Raguet who had become an associate in 1792 and when this died in 1810, his son Alexandre Raguet-Lépine continued the business. However, Jean-Antoine Lépine continued to be active in the firm until his demise, happened in 1814 at his home of Rue St. Anne in Paris.

The business was sold to Jean Paul Chapuy in 1815, employing Lepine's nephew Jacques Lépine (working from 1814 until 1825) who had been appointed clockmaker to the King of Westfalia (Germany) in 1809.[16] Later in 1827 it was sold to Deschamps who was succeeded in 1832 by Fabre (Favre). In 1853 passed to Boulay. 1885: Roux, Boulay's son in law. 1901: Ferdinand Verger. 1914: Last acquisition. 1919: Residual stock purchased by Louis Leroy. The business always continued under the name Lépine.[17]

Several of Lepine clocks and watches are on display in European museums and palaces, his timepieces are among the finest in the history of watchmaking.

He played a significant role in allowing us to strap watches onto our wrists.[18]

Historical associations

The horologist was patronised by leading figures of his day including the Comtesse d'Artois and de Provence, many French aristocracy as well as the Spanish, British and Swedish royalty.[19] Apart from monarchs, aristocrats, bourgeoises, etc., such was the popularity of Lépine's design that George Washington,[20] retired as President of the United States, searched for:

Dear Sir, I had the pleasure to receive by the last mail your letter dated the 12th of this month. I am much obliged by your offer of executing commissions for me in Europe, and shall take the liberty of charging you with one only. I wish to have a good gold watch procured for my own use; not a small, trifling, nor finically ornamented one, but a watch well executed in point of workmanship, and of about the size and kind of that which was procured by Mr. (Thomas) Jefferson for Mr. (James) Madison, which was large and flat. I imagine Mr. Jefferson can give you the best advice on the subject, as I am told this species of watches, which I have described, can be found cheaper and better fabricated in Paris than in London. (...)"

[21] Letter from George Washington to Gouverneur Morris. Mount Vernon, 28 November 1788.

The pocket watch he received through his emissary in Paris was from '"Mr. Lépine (who) is at the Head of his Profession here, and in Consequence asks more for his Work than any Body else. I therefore waited on Mr. L'Epine and agreed with him for two Watches exactly alike, one of which be for you and the other for me".[22] Gouverneur Morris in Paris 23 February 1789.

References

External links

This article is issued from Wikipedia - version of the 10/30/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.