Kissing gate
A kissing gate is a type of gate which allows people to pass through, but not livestock.
The normal construction is a half-round, rectangular, trapezoidal or V-shaped enclosure with a hinged gate trapped between its arms. When the gate is parked at either side of the enclosure, there is no gap to pass through. However, the gate can be pushed to give access to the small enclosure, then moved in the opposite direction to close the first opening and allow exit from the enclosure to the other side. The enclosure may be made large enough to accommodate pushchairs and wheelchairs. The gate itself is usually self-closing, to the side away from the land where animals are kept. The self-closing may be by hinge geometry but sometimes by a spring or weight.
This design of gate does not usually allow bicycles to be taken through, and they must be lifted over the fence. Alternatively they (or horses) may pass instead through an adjacent conventional gate, or an additional latch may allow the kissing gate itself to open fully for this purpose.
The etymology of the name is that the gate merely "kisses" (touches) the enclosure on either side, rather than needing to be securely latched.
Disabled access
The UK's Disability Discrimination Act states public services should make "reasonable adjustments" to allow disabled access. The Department for Environment, Food and Rural Affairs (DEFRA) in England has suggested in this context that kissing gates and stiles should be in time replaced or supplemented by a type that would allow access to a wider range of users.[1]
See also
 |
Wikimedia Commons has media related to Kissing gates. |
 |
Look up kissing gate in Wiktionary, the free dictionary. |
Further reading
Kissing gates are included in a British Standard: BS5709:2006: Gaps, Gates & Stiles ISBN 0-580-48107-7. The standard is functional rather than prescriptive.