Kitchen cabinet

For the political term, see Kitchen Cabinet.
Kitchen cabinets in a farmhouse.

Kitchen cabinets are the built-in furniture installed in many kitchens for storage of food, cooking equipment, and often silverware and dishes for table service. Appliances such as refrigerators, dishwashers, and ovens are often integrated into kitchen cabinetry. There are many options for cabinets available at present.[1]

History

The Frankfurt kitchen of 1926

As commonly used today, the term kitchen cabinet denotes a built-in kitchen installation of either a floor or a wall cabinet. Typically, multiple floor cabinets are covered by a single counter and floors and walls are not accessible behind and under the cabinets. Kitchen cabinets per se were invented in the 20th century. A precursor, not built-in, was the Hoosier cabinet of the 1910s, a single piece of furniture incorporating storage and work surfaces, of which over 2 million were sold by 1920.[2]

Considering Americans spend 90% of their lives indoors, it’s clear why this is a key issue in designing healthy spaces. Additionally, air quality is not a stand-alone issue; rather, every other component of the home can affect overall air quality. Air quality can be compromised by off-gassing from cabinetry, countertops, flooring, wall coverings or fabrics; by cooking by-products released into the air, or by mold caused by excess moisture or poor ventilation.[4]

Cabinet wood choices

Cabinets consist of six-sided wooden boxes or "carcases" closed on five sides with a door on the sixth.

A cabinet wall, and a counter with sink and backsplash.
A corner cabinet with a turntable for easier access.
A design choice is integrating kitchen cabinets with appliances and other surfaces for a consistent look.
One trend is for more cabinets both below and above the countertop.
Cabinets can wrap around an appliance such as a refrigerator.

Cabinet construction

Main article: Cabinetry

Cabinet carcass

Cabinets may be either face-frame or frameless in construction. Each option provides features and drawbacks.

Picture of kitchen cabinet setup in a home center store.
Most kitchen cabinets feature matching tops and bottoms and are available in different styles.
Pots in a cabinet
Most kitchen cabinets have peg-holes on either side within the cabinet allowing for adjustable shelf height.
Diagram of a cabinet, framed style.
Framed cabinets have a center stile. Hinges are mounted to the outer cabinet.
Diagram of a cabinet.
Frameless cabinets, also known as "European style", lack a center stile, and typically have concealed hinges mounted to each inside wall.
Picture of a kitchen cabinet on display in a home center store.
A kitchen cabinet display in a store in 2009 in New Jersey.

Cabinet details

Cabinet doors

Cabinet doors may feature a variety of materials such as wood, metal or glass. Wood may be solid wood ("breadboard" construction) or engineered wood or may be mixed (e.g. engineered wood panel in a solid wood frame)

A kitchen in a post-and-beam house, with glass panelled-doors.

Drawers and trays

A functional design objective for cabinet interiors involves maximization of useful space and utility in the context of the kitchen workflow. Drawers and trays in lower cabinets permit access from above and avoid uncomfortable or painful crouching.

In face-frame construction, a drawer or tray must clear the face-frame stile and is 2 inches (51 mm) narrower than the available cabinet interior space. The loss of 2 inches is particularly noticeable and significant for kitchens including multiple narrow [15-inch (380 mm) or less] cabinets.

In frameless construction, drawer boxes may be sized nearly to the interior opening of the cabinet providing better use of the available space.

However, the same is not true for trays. Even in the case of frameless construction doors and their hinges when open block a portion of the interior cabinet width. Since trays are mounted behind the door, trays are typically significantly narrower than drawers. Special hinges are available that can permit trays of similar width as drawers but they have not come into wide use.

Shelves provide in all cases more storage space than drawers or trays, but are less accessible.

Wall oven cabinets

Stock wall-oven cabinets may be adapted to built-in ovens, coffee-makers, or other appliances by removing portions of the cabinet and adding trim panels to achieve a flush installation.

Frameless cabinets provide for wall oven front panel widths equal to the cabinet width (see above). In such an installation the oven front panel occupies a similar profile as a cabinet door. Accordingly, frameless installations for wall-oven make most efficient use of the available wall space in a kitchen.

This effect is difficult to achieve in typical face-frame cabinet installations, as it requires modification to the face-frame (essentially eliminating the face-frame at the oven cut-out).

Cabinet finishes

Stainless steel built-in appliances around kitchen cabinets.

Cabinets may be finished with opaque paint, opaque lacquer and transparent finishes such as lacquer or varnish. Decorative finishes include distressing, glazing, and toning. The choice of finish can affect the cabinet's color, sheen (from flat to high gloss), and feel.

Cabinet hardware

Indoor picture of kitchen cabinet hardware options on a sales display.
There are many kitchen cabinet hardware options available.

Hardware is the term used for metal fittings incorporated into a cabinet extraneous of the wood or engineered wood substitute and the countertop. The most basic hardware consists of hinges and drawer/door pulls, although only hinges are an absolute necessity for a cabinet since pulls can be fashioned of wood or plastic, and drawer slides were traditionally fashioned of wood. In a modern kitchen it is highly unusual to use wood for a drawer slides owing to the much superior quality of metal drawer slides/sides.

Drawers and trays

Drawers and trays make it easier to access a cabinet's contents. They are a substantial benefit because they reduce bending and squatting. The only drawback is slightly less usable space which is taken up by the slides as well as door clearances. A typical drawer is 5 inches (130 mm) narrower than a comparable shelf. A drawer can usually hold about 75 to 100 lbs for ordinary use. Using slides, mounted on the side (reducing width slightly) or bottom (completely out of sight), a drawer or tray can be extended considerably with a smooth, linear motion using minimum effort.

Drawer extension is the exposed proportion of a fully extended drawer. Traditional drawers with wood-on-wood runners can only be extended about three-quarters; however, modern runners enable full-extension drawers. A slide's design parameters are its height, depth, extension, weight rating, durability, serviceability, and smoothness of operation. One new feature is soft-close buffering.

Specialty hardware

Kitchen cabinet hardware displayed in a store in 2009.
Kitchen cabinet hardware.

There is a large variety of specialty hardware for kitchen cabinets. Special hardware for corner and other blind cabinets makes their contents more easily accessible. They may be in the form of lazy susans with or without a wedge cut out or of tray slides which enable the hidden corner space to be occupied with trays that slide both laterally and forwards/backwards. Sponge drawers use special hinges that fit between the cabinet front and the sink.

Buying cabinets

Before buying cabinets, precise measurements are essential otherwise there may be unutilized space, cabinets may not fit, or there may be interference between various elements of the kitchen, such as doors and drawers.

Buyers can buy pre-built "stock" cabinets for fast delivery which usually arrive in a week or less. In contrast, custom-made cabinets can have longer delivery times, such as four weeks.

Stock kitchen cabinets available from a home center can be installed by yourself or a handyman.

Cabinet dimensions are specified with width first, height second, depth last. The widthheightdepth is a generally accepted convention. A 18x36x12 cabinet is therefore 18 inches (460 mm) wide, 36 inches (910 mm) tall, and 12 inches (300 mm) deep. Sometimes upper cabinets are presumed to be 12 inches (300 mm) deep, so only the width and height are given. For example, a "W1836" label means wall-mounted cabinet [12 inches (300 mm) deep] is 18 inches (460 mm) wide and 36 inches (910 mm) high.

Custom cabinetry, while expensive, can fit the available space attractively, and can fit into walls which aren't exactly flat or straight. They can combine more than one opening and eliminate unsightly doubled stiles in face-frame installations as well as bring aesthetic appeal using unusual woods or finishes. Custom cabinets sometimes offer inset cabinet doors, and can match existing or period furniture styles. It's sometimes possible to mix custom and stock cabinetry which have identical finishes.

Cabinets can be purchased from specialty retailers, kitchen remodelers, home centers, on-line retailers, and ready-to-assemble furniture manufacturers. Some installers offer a package deal from measurement, to construction, to installation.

Cabinets are sometimes delivered in fully assembled form. Inspect carcases carefully before installation, since defects are difficult to repair after installation. Ready-to-assemble furniture cabinets are lower-in-cost and are delivered in a flat box. Some courses teach homeowners how to build their own cabinets.[6]

Cleaning cabinets

Since kitchens are rooms for food preparation, cabinets which store food should be kept clean with cloth microfiber or feather dusters. Tough grease stains and coarse dirt can be removed with warm water and a grease solvent, then wiped clean with a plain cotton cloth. Window cleaners and clean cloths can be used with a microfiber cloth to clean up.

Bibliography

References

  1. Andrea Girolamo (November 2009). "Cabinets Impact Healthy Kitchen Designs". Kitchen & Bath design news. Retrieved 2009-11-21. Perhaps the trickiest part of creating a healthy kitchen has to do with choosing the right cabinets. Cabinetry offers its own unique set of concerns, such as the use of proper wood, paint and adhesives. Indeed, there are plenty of places for cabinetry to veer into an unhealthy direction if not handled properly.
  2. Alexandra Lange, The New York Times, August 27, 2010 "What’s Cooking in Kitchen Design?"
  3. Bill Burnett,Kevin Burnett (May 13, 2009). "Cheaper kitchen cabinet update needs DIY grease". San Francisco Chronicle. Retrieved 2009-11-21. Refinishing is not only realistic but downright cheap compared with the first two options - especially if you undertake the heavy lifting yourself by at least stripping the carcasses. There are two suboptions: You can replace the drawer fronts and cabinet doors or you can refinish them.
  4. 1 2 3 "Green Product Options, Interest Gaining Ground". Kitchen & Bath design news. November 2009. Retrieved 2009-11-21. Kitchen and bath designers indicate that their customers want to make changes, and even small ones will give them the feeling that they are doing something for their families and the world around them ... Air quality can be compromised by off-gassing from cabinetry, countertops, flooring, wall coverings or fabrics; by cooking by-products released into the air, or by mold caused by excess moisture or poor ventilation.
  5. "Classic Simplicity". Kitchen & Bath design news. September 2009. Retrieved 2009-11-21. Traditional-style cabinetry remains the top seller in kitchen and bath cabinetry, but the runners-up, transitional and contemporary styles, are gaining ground. Partly a reflection of troubled times, consumer interest in all-around simplicity has risen: Designs with clean lines and surfaces are in ever-increasing demand. Other concerns for today's consumers include increased functionality and value for the dollar.
  6. "Kitchen Cabinet Construction". San Francisco Chronicle. 2008-12-12. Retrieved 2009-11-21. Kitchen Cabinet Construction This class will teach you how to construct face frame kitchen cabinets. Discussion will include how to use story boards to layout a series of cabinets. You will build a cabinet carcass, face frame and then learn tips and techniques for putting it all together to make a beautiful kitchen cabinet.
This article is issued from Wikipedia - version of the 10/30/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.