Kodacolor (filmmaking)

For other uses of the "Kodacolor" brand, see Kodacolor (disambiguation).

In motion pictures, Kodak's Kodacolor brand was associated with an early lenticular (additive color) color motion picture process, first introduced in 1928 for 16mm film.[1] The process was based on the Keller-Dorian system of lenticular color photography.

The process used a special panchromatic black-and-white film stock used with the emulsion away from the lens.[2] The film base in front of the emulsion was embossed with a mass of tiny lenses, the purpose of which was to form small images of a striped filter which was attached to the camera lens. The filter had three colored stripes (red, green and blue-violet); when an exposure was made the varying proportion of each color reflected from the subject passed through the filter and was recorded on the film beneath each of the embossed lenses as areas of strips in groups of three, each strip varying in density according to the received color value (Dufaycolor used similar principles, but had the filter as part of the film itself).

Filming required the camera to be used at f/1.9 only, so that the striped filter worked correctly. The original Kodacolor film required an exposure of about a 1/30 second at f/1.9 in bright sunlight representing a film 'speed' (sensitivity) in modern terms of about 0.5 ISO. The physical movement of the film through the gate (frame-advance) requires additional time. The later Super Sensitive Kodacolor could be used "outdoors in any good photographic light, and even indoors under favourable conditions."

To project the film a projector was required fitted with the Kodacolor Projection Filter, which is similar in appearance the filter fitted to the camera. The lenticular image on the film is transformed into a natural color picture on the screen. As with most color processes involving a lenticular image the pattern intrudes, and there is noticeable light loss.

While Kodacolor was a popular color home movie format, it had several drawbacks. It could not yield multiple copies easily, special film was necessary to shoot with, and the additive image was colorful and clear, but inherently darker than subtractive processes.

Lenticular Kodacolor was phased out after the introduction of 16 mm Kodachrome film in 1935.

See also

References

  1. Chronology of MP Films - 1889 to 1939, kodak.com. Article retrieved 2006-12-02.
  2. Garfinkel, Steve, Forever 16: Kodak celebrates 80 years of 16 mm film, kodak.com. Article retrieved 2006-12-02.
This article is issued from Wikipedia - version of the 4/13/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.