Lamborghini Countach

This article is about the sports car. For the Shooter Jennings album, see Countach (For Giorgio).
Lamborghini Countach

Lamborghini Countach LP500 S
Overview
Manufacturer Lamborghini
Production 1974–1990
(2,049 produced)
Assembly Sant'Agata Bolognese, Italy
Designer Marcello Gandini at Bertone[1]
Body and chassis
Class Sports car (S)
Body style 2-door coupé
Layout Longitudinal mid-engine, rear-wheel-drive
Powertrain
Engine Lamborghini V12
LP400, LP400 S: 3929 cc
LP500 S: 4754 cc
5000 QV, 25th Anniversary: 5167 cc
Transmission 5-speed manual[2]
Dimensions
Wheelbase 2,450 mm (96.46 in)[3]
Length 4,140 mm (162.99 in)[4]
Height 1,070 mm (42.13 in)[3][4]
Chronology
Predecessor Lamborghini Miura
Successor Lamborghini Diablo

The Lamborghini Countach is a mid-engined, V12 sports car produced by Italian car manufacturer Lamborghini from 1974 to 1990. Its design pioneered and popularized the wedge-shaped, sharply angled look popular in many high-performance sports cars. It also popularized the "cab forward" design concept, which pushes the passenger compartment forward to accommodate a larger engine.

In 2004, American car magazine Sports Car International named the car number three on the list of Top Sports Cars of the 1970s, and listed it number ten on their list of Top Sports Cars of the 1980s.

Name

The word countach (pronounced [kuŋˈtatʃ]) is an exclamation of astonishment in the local dialect (see Piedmontese language),[5] that means "perbacco" or "accidenti" ("Heavens!").

The prototype was introduced to the world at the 1971 Geneva Motor Show. Most previous and subsequent Lamborghini car names were associated with bulls and bullfighting.

Styling

The Countach was styled by Marcello Gandini of the Bertone design studio, the same designer and studio that designed the Miura. Gandini was then a young, inexperienced designer — not very experienced in the practical, ergonomic aspects of automobile design, but at the same time unhindered by them. Gandini again produced another striking design. The Countach shape was wide and low (1.07 metres or 42.1 inches), but not very long (only 4.1 metres or 163 inches). Its angular and wedge-shaped body was made almost entirely of flat, trapezoidal panels.

Countach LP500 (viewed from above)
The Countach LP400 was the original production model
Countach LP400 scissor doors

The doors, most often credited as a Lamborghini trademark, were a remarkable design feature for the Countach. They first appeared on the Alfa Romeo 33 'Carabo' concept car in 1968, an earlier design accomplishment, also by the talented Gandini. The doors have come to be known as scissor doors: hinged at the front with horizontal hinges, so that they lifted up and tilted forwards. The main reason is the car's tubular spaceframe chassis results in very high and wide door sills. It was also partly for style, and partly because the width of the car made conventional doors impossible to use in even slightly confined space. Care needed to be taken, though, in opening the doors with a low roof overhead. The car's poor rear visibility and wide sills led to drivers adopting a method of reversing the car for parking by opening the door, sitting on the sill, and reversing while looking over the back of the car from outside.

The pure style of the prototype was progressively altered by the evolution of the car to improve its performance, handling, tractability, and ability to meet mandated requirements. This began with the first production model, which included several vents that Lamborghini found necessary to cool the engine adequately. These included the iconic NACA duct on the doors and rear fenders. The car design changes ended with a large engine vent directly behind the driver, reducing the rear view. Later additions—including fender flares, spoilers, carburetor covers, and bumpers—progressively changed the car's aesthetic values.

The Countach's styling and visual impression made it an icon of great design to almost everyone except automotive engineers. The superior performance characteristics of later Lamborghini models (such as the Diablo, or the Murciélago) appealed to performance car drivers and engineers, but they never had the originality or outrageousness that gave the Countach its distinction. The different impressions left by the various Lamborghini models have generated numerous debates and disagreements over what constitutes "classic" or "great" automotive design (elegant looks and style, versus technical and engineering superiority). Despite the impracticality and (required/needed) updating over time, one should note that the basic iconic shape of the first Countach prototype revealed in 1971 remained virtually unchanged over an exceptionally long 19-year lifespan.

Engine

Lamborghini V12 engine

The rear wheels were driven by a traditional Lamborghini V12 engine mounted longitudinally with a mid-engined configuration. This contrasted with the Miura with its centrally mounted, transversely-installed engine.[6] For better weight distribution, the engine is pointed "backwards"; the output shaft is at the front, and the gearbox is in front of the engine, the driveshaft running back through the engine's sump to a differential at the rear. Although originally planned as a 5 L (310 cu in) powerplant, the first production cars used the Lamborghini Miura's 4-liter engine. Later advances increased the displacement to 4754 cc and then (in the "Quattrovalvole" model) 5167 cc with four valves per cylinder.

All Lamborghini Countaches were equipped with six Weber carburetors until the arrival of the 5000QV model, at which time the car became available in America, and used Bosch K-Jetronic fuel injection. The European models, however, continued to use the carburetors (producing more power than fuel-injected cars) until the arrival of the Lamborghini Diablo, which replaced the Countach.

Construction

The Countach used a skin of aircraft-grade aluminium over a tubular space frame, as in a racing car. Although expensive to build, it is immensely strong and very light; despite its size, the car weighs approximately 1,400 kg (3,100 lb).[7] The underbody tray was fiberglass.

Models

Countach LP500 prototype

A single prototype was built, the LP500[8] (the 500 stands for the 5.0 L (310 cu in) engine displacement they intended to use). Painted bright sunflower yellow, the concept car proved to be a stunner at the Geneva Motor Show in 1971. Sporting Gandini's original design concepts, the car's design required extensive modification to qualify for mass-production. The two most notable changes were necessary because air-intake proved insufficient to cool the engine. The prototype had slatted, 'gill-like' intake ducts on the rear shoulders, and these were replaced with massive "air box" scoops that extended out from the vehicle's streamlined body. In addition, NACA style air ducts were cut into the body of the car beneath the B pillar, which required eliminating the prototype's traditional door handles and replacing them with handles of a unique configuration set into the portion of the ducts carved into the scissor doors. Aluminium-honeycomb sheeting, a concept utilized in the prototype design, was also dropped in preparation for production.

The car did not survive; it was sacrificed in a crash test at MIRA facility to gain European type approval, even though its construction method was utterly unlike production vehicles.

Countach LP400

Countach LP400, front 3/4
Rear 3/4

The Countach entered production as the LP400 with a 3929 cc engine delivering 375 metric horsepower (276 kW; 370 hp). The first production Countach was delivered to an Australian in 1974. Externally, little had altered from the final form of the prototype except at the rear, where conventional lights replaced the futuristic light clusters of the prototype. The styling had become rather more aggressive than Gandini's original conception, with the required large air scoops and vents to keep the car from overheating, but the overall shape was still very sleek. The original LP400 rode on the quite narrow tires of the time, but their narrowness and the slick styling meant that this version had the lowest drag coefficient of any Countach model. The emblems at the rear simply read "Lamborghini" and "Countach", with no engine displacement or valve arrangement markings as is found on later cars. By the end of 1977, the company had produced 158 Countach LP400s.[6]

In recent years the original LP400 has become collectable, and in an auction in June 2014, a 1975 model sold for GB£953,500 at Bonhams' Goodwood Festival of Speed auction.[9]

Countach LP400 S

Lamborghini LP400 S (rear)

In 1978, a new LP400 S model was introduced. Though the engine was slightly downgraded from the LP400 model (355 metric horsepower (350 bhp; 261 kW)), the most radical changes were in the exterior, where the tires were replaced with 345/35R15 Pirelli P7 tyres; the widest tyres available on a production car at the time, and fiberglass wheel arch extensions were added, giving the car the fundamental look it kept until the end of its production run. An optional V-shaped spoiler was available over the rear deck, which, while improving high-speed stability, reduced the top speed by at least 16 km/h (10 mph). Most owners ordered the wing. The LP400 S handling was improved by the wider tires, which made the car more stable in cornering. Aesthetically, some prefer the slick lines of the original, while others prefer the more aggressive lines of the later models, beginning with the LP400 S. The standard emblems ("Lamborghini" and "Countach") were kept at the rear, but an angular "S" emblem was added after the "Countach" on the right side.

There are three distinct Countach LP400 S Series:

Countach LP500 S

Countach LP500 S

1982 saw another improvement, this time giving a bigger, more powerful 4754 cc engine. The bodywork was unaltered, however the interior was given a refresh. This version of the car is sometimes called the 5000 S, which may cause confusion with the later 5000 QV (next section). 323 cars were built.

Countach LP Turbo S

Two prototypes of the 1984 Countach Turbo S were built by Lamborghini, of which one is known to exist. The Turbo S weighed 1,515 kg (3,340 lb), while its 4.8 liter twin-turbo V12 had a claimed maximum power output of 758 PS (558 kW) and a torque output of 876 N·m (646 lb·ft), giving the car an acceleration of 0–100 km/h (0–62 mph) in 3.7 seconds and a top speed of 333 km/h (207 mph). A turbo adjuster, located beneath the steering wheel, could be used to adjust the boost pressure from 0.7 bar to 1.5 bar at which the engine performed its maximum power output. The Turbo S has 15" wheels with 255/45 tyres on the front and 345/35 on the rear.[10]

Countach 5000 Quattrovalvole

In 1985 the engine design evolved again, as it was bored and stroked to 5167 cc and given four valves per cylinder—quattrovalvole in Italian, hence the model's name, Countach 5000 Quattrovalvole or 5000 QV in short. The carburetors were moved from the sides to the top of the engine for better breathing—unfortunately this created a hump on the engine deck, reducing the already poor rear visibility to almost nothing. Some body panels were also replaced by Kevlar. In later versions of the engine, the carburetors were replaced with fuel injection.

Although this change was the most notable on the exterior, the most prominent change under the hood was the introduction of fuel injection, with the Bosch K-Jetronic fuel injection, providing 414 bhp (309 kW; 420 PS), rather than the six Weber carburetors providing 455 bhp (339 kW; 461 PS) used in the previous carbureted models. As for other markets, 1987 and 1988 model Quattrovalvoles received straked sideskirts. 610 cars were built.

25th Anniversary Countach

25th Anniversary Countach
Overview
Production 1988–1990
658 produced
Designer Horacio Pagani[11]
Powertrain
Engine 5167 cc V12
Dimensions
Wheelbase 2,500 mm (98.4 in)
Length 4,140 mm (163.0 in)
Width 2,000 mm (78.7 in)
Height 1,070 mm (42.1 in)
Curb weight 1,490 kg (3,285 lb)

Named to honour the company's twenty-fifth anniversary, in 1988, the 25th Anniversary Countach, although mechanically very similar to the 5000QV, sported considerable restyling. Notably, restyling, enlargement and extension of the rear 'air-box' intake-ducts was among other refinements undertaken (extending them to a more gradual incline further in-keeping with aerodynamic-streamlining), while the secondary pair of debossed ducts, originally situated further behind them, were brought forward and relocated directly on top, encompassing refashioned fins now running longitudinally rather than transversely. Additionally, further reconstruction of an already modified engine-bay cover, from a concept consisting of dual-raised sections and tri-ducting, to one that embodies a centre-raised section incorporating dual-ducting become another feature. Various redevelopments to the rear-end were made; most notably the introduction of a rear bumper extending outwardly from the lower-portion.

These styling changes were unpopular with many—particularly features such as the fin strakes within the primary rear-intake-ducts openings, which appeared to mimic the Ferrari Testarossa, though providing crucial improved engine cooling. Nonetheless it was only outsold by the QV model. It continued to featured 345/35R15 tyres. The Anniversary edition was produced up until 1990 before being superseded by the Lamborghini Diablo.

The 25th Anniversary Edition was the most refined and possibly the fastest edition of the Lamborghini Countach: 0–97 km/h (0–60 mph) in 4.7 seconds and 295 km/h (183 mph) all out.[12]

Walter Wolf Countach

In 1975, Walter Wolf, a wealthy Canadian businessman and owner of the Wolf F1 Racing team in the 1970s, purchased an LP400; however, he was not satisfied with the LP400's engine and asked Gianpaolo Dallara, the chief engineer of Lamborghini at that time, to create a special high-power version of the Countach. It was the "code No. 1120148" Walter Wolf special with an engine identical to the 5.0 L (310 cu in) engine from the Countach LP500 prototype,[13] which produced 447 horsepower (333 kW) at 7900 rpm and reached a supposed maximum speed of 315 or 323.6 km/h (195.7 or 201.1 mph). This model also featured the upgraded wheels, Pirelli P7 tires, large fender flares, and front and rear spoilers of the LP400 S model. It was painted red with black fender flares, and was designated "LP500 S" like the standard Countach model from the 1980s, and was the stepping stone that led to this later production model.

Two other Wolf Countaches were produced, one painted blue, No. 1120202 (currently in Germany) and one navy blue, No. 1121210. (This machine was owned by Wolf for a long time, but was eventually sold. Currently owned by Japanese businessman Shinji Fukuda). Both of the later Wolf Countaches used the original 5.0 L (310 cu in) engine commissioned by Wolf, transplanted to each car in turn.[14]

US Sales

The United States is Lamborghini's biggest market and has traditionally been the largest market in the world for expensive automobiles such as exotic sportcars.[15][16]

Countach 5000 Quattrovalvole (U.S.), showing the federal bumpers

In 1985, a US specification model was produced by the factory, with styling changes to allow bumpers to meet US federal safety standards. Many owners however, had those bumpers removed immediately, or never had them installed at all, as the bulky looking addition to the car was said to ruin the otherwise smooth lines of the body. The 1985 US model had a base price close to $100,000. Only two optional extras were available: a $5,500 aerodynamic spoiler and a $7,500 sound system.

The U.S. Government exempts cars older than 25 years from all design, safety, and emission standards legislation, and any such regulations, so Countaches can be freely imported by any private customer and registered for unrestricted road use.

F1 Safety Car

Between 1980 and 1983, Formula One employed the Countach as its Safety Car during the Monaco Grand Prix.[17][18]

Production figures

A total of 2,042 cars were built during the Countach's sixteen-year lifetime:

Prototype LP400 LP400 S LP500 S 5000 QV 25 Anniversary
1 157 237 321 676 650

Substantially more than half were built in the final five years of production, as Lamborghini's new corporate owners increased production.

Engine data

Model Displacement Power Torque Compr. ratio Fuel and induction
systems
LP500 prototype 4,971 cc (303.3 cu in) 328 kW (446 PS) 448 N·m (330 lbf·ft) at 5,750 rpm 10.5:1 Carburetor
LP400 3,929 cc (239.8 cu in) 276 kW (375 PS) 361 N·m (266 lb·ft) at 5,000 rpm 10.5:1 Carburetor
LP400 S 3,929 cc (239.8 cu in) 261 kW (355 PS) 356 N·m (263 lb·ft) at 5,000 rpm 10.5:1 Carburetor
LP500 S 4,754 cc (290.1 cu in) 276 kW (375 PS) 418 N·m (308 lb·ft) at 4,500 rpm 9.2:1 Carburetor
LP500 Turbo S prototype 4,754 cc (290.1 cu in) 549 kW (746 PS) 876 N·m (646 lb·ft) at 4,500 rpm N/A Twin turbochargers, carburetor
5000 QV 5,167 cc (315.3 cu in) 335 kW (455 PS) 500 N·m (369 lb·ft) at 5,200 rpm 9.5:1 Carburetor
25th Anniversary
Evoluzione prototype 5,167 cc (315.3 cu in)[19] 335 kW (455 PS) at 7,000 rpm[19] N/A 9.5:1 Motronic fuel injection[19]

Driving performance and weight

Model Top speed Acceleration 0–100 km/h Empty weight
LP500 prototype 1,130 kg (2,491 lb)
LP400 1,065 kg (2,348 lb)
LP400 S 254 km/h (158 mph)[20] 5.9 s 1,200 kg (2,646 lb)
LP500 S 257 km/h (160 mph)[21] 5.4 s 1,480 kg (3,263 lb)
5000 QV 288 km/h (179 mph)[22] 4.9 s 1,490 kg (3,285 lb)
25th Anniversary 1,590 kg (3,505 lb)
Evoluzione prototype N/A 4.5 s[19] 1,050 kg (2,315 lb)[19]
LP500 Turbo S prototype N/A

Replicas

In 1984, Rod Ladret of Ladret Design Studio located in Alberta, Canada, began producing and marketing a replica of the Countach. The form for the kit was sculpted from plaster and then a fiberglass mold was made of the form. The kits and cars Ladret Design Studio built included a tube frame chassis with an American V8 power plant. Ladret Design Studio built 141 of these replicas and the industrial clients who purchased his fiberglass forms have built several thousand over the past two decades. As of 2007 there are still several companies building kits based on Ladret's forms built in 1984. In 1993, Ladret ceased manufacturing the Countach replica and moved on to other projects.

From around 1985 until the late 1990s, several companies replicated the Countach with varying degrees of success. In 1985, Gary Thompson and Pete Jackson rented a real Countach from an up-market Manchester car-rental company and made a glass-fiber mold of it. This mold resulted in a number of UK-based manufacturers producing their own Countach replicas. A few were able to produce remarkably good replicas, including Paul Lawrenson of Prova Cars, Alan Booth of Sienna Cars, Phil Cheetham of Mirage Replicas, and Ken Cook of Brightwheel/Classic Replicas.'Which Kit' said in their March 1988 write-up on the CR6 Stinger; "Brightwheel Replicas CR6 Stinger is unquestionably the best Countach Replica we've driven" Steve Cropley said in "Car" Feb 1989, is said to be the best available and it does set a high standard, this one will really fool them" Many other praises were made about the Stinger during the time it was made (1988–1989)and all but one of the factory cars went to Japan.(Ken Cook. 2015) DC Supercars now has Phil Cheetham moulds and is producing Countach replicas.

See also

References

  1. "Designer". ajovalo.net. Retrieved 8 February 2012.
  2. "Image: 73countach2.jpg, (1124 × 542 px)". storm.oldcarmanualproject.com. Retrieved 1 September 2015.
  3. 1 2 World Cars 1982. Herald Books. ISBN 0-910714-14-2.
  4. 1 2 World Cars 1978. Herald Books. ISBN 0-910714-10-X.
  5. Edsall, Larry (2005). Legendary Cars. White Star. ISBN 978-88-544-0098-6.
  6. 1 2 "Nachtschicht im Schloss: A report on a concours d'elegance at Schloss Bensberg". Auto Motor u. Sport. Heft 25 2010: 38. 18 November 2010.
  7. Mark Wan. "Lamborghini Countach". Autozine.org.
  8. "LP500 Prototipo". supercars.net. Retrieved 17 February 2013.
  9. "Lamborghini Countachs set to top a million after another mega-sale". Classic and Sports Car. 30 June 2014. Retrieved 1 July 2014.
  10. Paulokat, Mathias (12 November 2009). "Lamborghini Countach Turbo S". Classic Driver (in German). Retrieved 7 May 2015.
  11. "Collectible Classic: 1974-90 Lamborghini Countach". Automobile Magazine. Retrieved 13 January 2012.
  12. "Lamborghini Countach - HowStuffWorks". HowStuffWorks.
  13. Lyons, Pete (1988), The Complete Book of Lamborghini, Publications International, Ltd, pp. 218–219, ISBN 978-0854297351
  14. Lyons, Pete (1988), The Complete Book of Lamborghini, Publications International, Ltd, p. 219, ISBN 978-0854297351
  15. Peter Valdes-Dapena. "Lamborghini - Exotic car sales surge to record high - except Ferrari - CNNMoney". money.cnn.com. Retrieved 1 September 2015.
  16. http://www.bloomberg.com/news/articles/2013-09-30/lamborghini-signals-luxury-shift-from-china-to-u-s-japan-cars
  17. "Holy Ferruccio! A Lamborghini Countach Safety Car". Jalopnik. 10 July 2010. Retrieved 3 March 2015.
  18. "The F1 Safety Car's Bumpy Ride". 22 December 2007. Retrieved 3 April 2015.
  19. 1 2 3 4 5 "Countach Evoluzione". AutoCapital. Editoriale del Corriere della Sera: 15–16, 19–20. November 1987.
  20. Anthony Kodack (14 February 2007). "1973 - 1990 Lamborghini Countach". topspeed.com.
  21. Sherman, Don (December 1983). "Life in the whips-and-chains lane". Car and Driver.
  22. http://porschecarshistory.com/world-s-fastest-car-1987-road-track-mag/

External links

Wikimedia Commons has media related to Lamborghini Countach.
This article is issued from Wikipedia - version of the 11/24/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.