Lanchester Ten

Lanchester Ten
LA10

six-light saloon 1936 example
Overview
Manufacturer The Lanchester Motor Company Limited
Sandy Lane, Radford, Coventry CV1 4DX
Production Approximately 12,250 units
mid-1932 to mid 1936
Body and chassis
Body style Catalogued:
4-door six-light saloon
4-door four-light sports saloon
2-door 2+2-seater fixed head coupé
2-door 4-seater open car by Martin Walter
Chassis provided for coachbuilders
Layout FR layout
Related Lanchester 15/18, (Daimler Light Twenty 16/20), Daimler Fifteen, BSA Ten
Powertrain
Engine 1,203 cc (73.4 cu in)
(and 1,444 cc (88.1 cu in), 1936 only)
four-cylinder in-line overhead valve
water-cooled[1]
Transmission 4-speed preselective Self-changing gearbox and Fluid Flywheel through an open propellor shaft to a worm-drive for the half-floating back axle[1]
Dimensions
Wheelbase 102 12 in (2,600 mm)[1]
track 48 12 in (1,230 mm)[2]
Length 157 12 in (4,000 mm)[1]
Width 57 34 in (1,470 mm)[1]
Kerb weight 21 long cwt (2,400 lb; 1,100 kg)
Chronology
Predecessor new model
Lanchester Ten engine
Overview
Manufacturer The Lanchester Motor Company Limited
Production mid-1932 to mid-1935
Combustion chamber
Configuration 4-cylinder in-line
Displacement 1,203 cubic centimetres (73 cu in)[1]
Cylinder bore 63.5 mm (2.50 in)[2]
Piston stroke 95 mm (3.7 in)[2]
Cylinder block alloy Cast-iron
Aluminium-alloy pistons[1]
Cylinder head alloy Cast-iron detachable[1]
Valvetrain ohv operated by pushrods from a chain-driven camshaft[1]
Compression ratio 7.4:1[3]
Combustion
Fuel system carburettor with a circular cleaner and silencer on the intake, mounted high on the circular two-branch inlet manifold. The inlet manifold is joined at its centre to the exhaust manifold which has one twin and two single branches[1]
Fuel type Petrol mechanically pumped from an 8-gallon fuel tank at the rear[1]
Oil system full pressure lubrication[1]
Cooling system water circulates naturally and there is no fan for the honeycomb radiator which has a veed sloping casing with dummy shutters[1]
Output
Power output 32 bhp (24 kW; 32 PS) @4,000 rpm[1]
Torque output 60 lbs. ft. @ 2,000 rpm
Chronology
Predecessor developed from
Lanchester 15/18
(Daimler Light Twenty 16/20)
Successor Lanchester Ten 11 hp engine

The Lanchester Ten and Lanchester Eleven were sold by The Lanchester Motor Company Limited from the Ten's announcement in September 1932[1] until 1951. Quite different from previous Lanchesters, the Ten was the second (it followed the Lanchester 15/18) of Lanchester's new owner's new Daimler-linked Lanchester range. The names Ten and Eleven referred to the engine's rating for the annual tax and did not relate to the engine's power output.

Part of the thinking behind BSA's acquisition of Lanchester was, in consideration of the international economic depression, to extend the BSA group's range of cars into the sectors between those filled by Daimler and the three-wheeled 'cars' of BSA Cars without affecting Daimler's super-luxury image.

Ultimately the smallest Lanchester became far too expensive for the size of car it was, few were sold and production ended in 1951.

Lanchester Ten

The Lanchester Ten announced in September 1932 shared its basic chassis with the BSA Ten which would be announced the following month. The design of its four-cylinder engine it shared with the six-cylinder Lanchester 15/18 (Daimler Light Twenty 16/20), which had been in production for twelve months, and its engine represented just four-sixths of the 1805 cc Daimler Fifteen announced with this Ten.[1] The smallest Lanchester ever produced it was also the one produced in the greatest numbers, with approximately 12,250 sold.

Design and specifications

Additional details to those in the tables

Engine

The new engine's four-cylinder design was on the same general lines as the six-cylinder Lanchester 15/18 (not Eighteen) though with a much reduced bore and stroke taking down the swept volume from 2,504 cubic centimetres (153 cu in) to 1,203 cubic centimetres (73 cu in). Its crankshaft was provided with three main bearings. A 1287 cc, 40 b.h.p. (at 4,000 r.p.m.) version was produced, with a 7.4:1 compression ratio, and 60 lbs. ft. maximum torque at 2,000 r.p.m. [3]

The overhead valves had single springs but there were return springs to keep the rockers to the pushrods. Engine accessories were mounted: distributor on a level with the cylinder head, the coil just in front. The petrol pump, oil filter and oil diprod were mounted aft of the distributor.

Engine timing was by chain. The flywheel and gearbox formed a single unit with the engine which was slightly inclined and held to the chassis at four points on rubber.[1]

Transmission

This was the first small car to have the Daimler fluid flywheel transmission.[4]

The preselection finger and thumb lever was just under the steering wheel on the near side and so worked by the left hand. There was a stop for reverse.

Power was delivered to the wheels by Daimler fluid flywheel and Wilson four-speed preselective self-changing gearbox through a propeller shaft which was open and had mechanical joints. The back axle had half-floating underslung worm drive.[1]

Chassis

The frame had the popular cruciform or X-channelled sectioned cross-membering. The unit of engine, fluid flywheel and self-changing gearbox was held at four points on rubber, the two points in front being close together and on the cross member.

Half-elliptical springs wide-set to prevent roll were fitted with hydraulic shock-absorbers. In front they were shackled forwards, flat, sloped, and splayed—there were no dumb irons, while at the back the springs and frame were also under the axle.

Steering was by cam and lever. The four-wheel brakes were initially Lockheed hydraulic. The handbrake lever, designed for use as a parking brake, operated on the back wheels using cables. "The lower gears can be used as an emergency brake". Tyres were 4.5 x 19 inches[1]

Revisions to the specification before the October 1934 Motor Show:

Saloon six-light four-door body

"This body provides full room for four persons with a level floor. There are two cupboards, four pockets, a sliding roof, safety glass and other usual fittings but no ash trays. There are louvres over the four door glasses. The windscreen opens. The spare wheel is behind the folding luggage grid at the back. The generous wheelbase and the absence of a gearlever in the floor gives excellent entrance and exit through all four doorways." motoring correspondent The Times[1]

Performance

The motoring correspondent of The Times also reported "the saloon will keep up 50 easily, even under load, and will do about 60 on the level.[7] The Ten h.p. Lanchester 6-light saloon is a car de luxe by its transmission which gives the greatest smoothness and simplicity, rapid acceleration, and additional safety, and also by its design, general finish, and quietness in running.[8]

Pricing

Lanchester Ten
eleven horsepower engine
Overview
Manufacturer The Lanchester Motor Company Limited
Production mid-1935 to 1939
Combustion chamber
Configuration 4-cylinder in-line
fully counterbalanced 3-bearing crankshaft with a vibration damper within the fan pulley[9]
Displacement 1,444 cubic centimetres (88 cu in)[10]
Cylinder bore 66 mm (2.6 in)[11]
Piston stroke 105 mm (4.1 in)[11]
Compression ratio 6.25:1[9]
Combustion
Fuel system S.U. carburettor
Output
Power output 38 bhp (28 kW; 39 PS) @4,000 rpm Tax rating 10.82[11]
Chronology
Predecessor Lanchester Ten
Successor Lanchester Ten (1946-1951)

Engine upgrade for 1936

A twenty percent increase of engine capacity from 1203 cc to 1444 cc was announced on 14 August 1935. Although the engine's Tax rating was now 10.8 hp the new reduction in the rate of tax meant the annual tax charge was less.[10] The engine fluid flywheel and gearbox assembly has a five-point bi-axial rubber mounting.[9]

All models were now fitted with new tubular front seats giving back seat passengers extra toe-room.[10] The popularity of the cars enabled appreciable price reductions.[10]

Steering which was by cam and lever now by worm and nut. The propellor shaft is now provided with needle-roller bearings. There is a stabilising front bumper. Four-wheel brakes are now mechanical by Girling. Maximum speed was reported as having moved up to 65 mph.[11]

Road test

The Times reported the larger engine did not run as sweetly as its predecessor but that it had appreciably more liveliness and speed. There was still a slight hum with the engine running and the transmission in neutral but if anyone minded that the car can be held stationary with a gear engaged. Petrol capacity has been increased from 8 to 10 gallons and it was noted the weight of the six-light car had increased by 2 long hundredweight (220 lb; 100 kg).[11]


Lanchester Eleven facelift for 1937

Lanchester Eleven
LA11

Six-light saloon
(Car shown has an identical body but larger 14 engine)
Overview
Manufacturer The Lanchester Motor Company Limited
Production mid-1936 to 1939
Body and chassis
Body style Catalogued:
4-door six-light saloon
4-door four-light sports saloon
Chassis provided for coachbuilders[12]
Layout FR layout
Related Lanchester Fourteen Roadrider and Daimler New Fifteen
Powertrain
Engine 1,444 cc (88.1 cu in)
four-cylinder in-line
overhead valve water-cooled[12]
Transmission 4-speed preselective Self-changing gearbox and Fluid Flywheel[12]
Dimensions
Wheelbase 102 12 in (2,600 mm)[12]
track 48 12 in (1,230 mm)[12]
Length 157 12 in (4,000 mm)[12]
Width 57 34 in (1,470 mm)[12]
Kerb weight 24 long cwt 2 qr (2,740 lb or 1,240 kg)[12]
Chronology
Predecessor Lanchester Ten LA10
Successor Lanchester Ten LD10

New-shaped six-light saloon and four-light sports saloon bodies were quietly announced in the third week of September 1936 and the model was named Eleven instead of Ten.[13] The bodies were larger and heavier than before. The news of their availability seems to have been deliberately swamped by the prior announcement of the replacement for Lanchester's Twelve-six, the Fourteen saloon and sports saloon, both were variants of the Daimler Fifteen cars. The new Eleven grille is shown in the bottom left corner of the large display advertisement of the new Fourteens and very little of the rest of the car can be seen.[14]

The new Lanchester Elevens were smaller but almost identical in appearance to the slightly larger Lanchester and Daimler cars.[13]

Small improvements had been made to last year's 11-horsepower (8.2 kW) engine including the replacement of the S.U. carburettor by a Solex instrument which increased the power output to 43 bhp (32 kW) at 4000 rpm and improved the smoothness of running. The engine coolant now had a pump and thermostatically controlled bypass.[15]

Pricing

Motor Show October 1936:

Motor Show October 1937:

reduced prices made possible by "the increased popularity and larger sales" of the Eleven
The panelled saloon and the sports saloon have new features such as wider doors and a central folding armrest and the weight of the standard saloon is now 24 12 long hundredweight (2,740 lb; 1,240 kg).[9]

Motor Show October 1938:

two body styles available

LD10

Lanchester Ten (1946–1951)
LD10

Standard all-steel saloon, registered 14 April 1947
Overview
Manufacturer The Lanchester Motor Company Limited
Sandy Lane, Radford, Coventry CV1 4DX
Production 3,030 units [17]
1946 to 1951 [17]
Powertrain
Engine 1,287 cc (78.5 cu in) overhead valve inline-four
Transmission 4-speed with preselector and Fluid Flywheel
Dimensions
Length 159 in (4,000 mm)[18]
Width 63 in (1,600 mm)[18]
Height 58 in (1,500 mm)[18]
Chronology
Successor Lanchester Fourteen
Sports saloon by Barker, 1951

The Lanchester Ten, also known as the LD10, produced after the Second World War was presented as a compact companion model to the Daimler range, being “craftsman built” and among the smallest ever volume-produced cars from the firm. It was initially produced with a steel six-light body by Briggs Motor Bodies of Dagenham though this body suffered from erratic deliveries by Briggs and rust problems due to the grade of steel allocated by the government for their manufacture. From September 1949 the same chassis was instead fitted with coachbuilt Barker aluminium alloy sports saloon bodywork. Other body variations included an Abbott-bodied drophead coupe and Hooper-bodied van.[18]

The four-cylinder claimed a power output of 40 bhp (29.8 kW) at 4,200 rpm. This was coupled through a fluid flywheel to an epicyclic preselector 4-speed gear box. Stopping power came from Girling mechanical brakes.[19]

The car was considered to be exceptionally smooth in operation, with reasonable performance for its time.[18]

Standard steel saloon, 1949

References

  1. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Cars Of To-Day. The Times, Tuesday, Sep 20, 1932; pg. 8; Issue 46243
  2. 1 2 3 Cars Of 1933.The Times, Friday, Jul 15, 1932; pg. 10; Issue 46186
  3. 1 2 The Lanchester Motor Company sales brochure, printed by The Fanfare Press, London
  4. The Olympia Show. The Times, Saturday, Oct 14, 1933; pg. 7; Issue 46575
  5. 1 2 The Olympia Show.The Times, Friday, Oct 12, 1934; pg. 6; Issue 46883
  6. Cars Of 1935. The Times, Friday, Sep 21, 1934; pg. 17; Issue 46865.
  7. 1 2 The Olympia Show.The Times, Saturday, Oct 15, 1932; pg. 6; Issue 46265
  8. Cars Of To-Day. The Times, Tuesday, Jan 15, 1935; pg. 10; Issue 46962
  9. 1 2 3 4 5 The Motor Show. The Times Thursday, Aug 19, 1937; pg. 14; Issue 47767
  10. 1 2 3 4 Cars Of 1936. The Times, Wednesday, Aug 14, 1935; pg. 8; Issue 47142
  11. 1 2 3 4 5 Cars Of Today.The Times, Tuesday, Nov 5, 1935; pg. 14; Issue 47213
  12. 1 2 3 4 5 6 7 8 The Times, Friday, Oct 15, 1937; pg. 8; Issue 47816
  13. 1 2 The Times Friday, Sep 25, 1936; pg. 8; Issue 47489
  14. The Times Tuesday, Sep 22, 1936; pg. 8; Issue 47486
  15. 1 2 The Motor Show. The Times Friday, Oct 16, 1936; pg. 7; Issue 47507
  16. The Motor Show. The Times Thursday, Sep 21, 1938; pg. 16; Issue 48105
  17. 1 2 Michael Sedgwick & Mark Gillies, A-Z of Cars 1945-1970, Haymarket Publishing Limited, Revised paperback edition published 1993, page 110
  18. 1 2 3 4 5 "Second Hand Car Guide Supplement". Practical Motorist. 6 (68): 768–769. April 1960.
  19. "Practical Motorist Data sheets. Essential information for cars for which handbooks are unobtainable: Lanchester "10" 1946–1947". Practical Motorist. 6 (65): 468. January 1960.
Wikimedia Commons has media related to Lanchester Ten.
This article is issued from Wikipedia - version of the 3/9/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.