Lens sag

Lens sag is a problem that sometimes afflicts very large refracting telescopes. It is the equivalent of mirror sag in reflecting telescopes. It occurs when the physical weight of the glass causes a distortion in the shape of the lens because the lens can only be supported by the edges. A mirror on the other hand can be effectively supported by the entire opposite face, making mirror sag much less of a problem. One expensive solution to lens sag is to place the telescope in orbit around the Earth.

The technical limit concerning lens sag was reached at the Yerkes refractor (1897) with an aperture of 40" (102 cm), where the sagging already causes small optical distortions. The 1890s therefore mark the end of the great refractors era.