List of ASTM International standards

This is a list of ASTM International standards, current and withdrawn.

A

• ASTM A1 Standard Specification for Carbon Steel Rail
• ASTM A6 Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
• ASTM A29 Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for
• ASTM A36 Standard Specification for Carbon Structural Steel
• ASTM A53 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
• ASTM A90 Standard Specification for Weight [Mass] of Coating on Iron and Steel Articles with Zinc of Zinc-Alloy Coatings
• ASTM A105 Standard Specification for Forgings, Carbon Steel for Piping Components
• ASTM A106 Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
• ASTM A108 Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished
• ASTM A123 Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
• ASTM A126 Standard specification for three classes of gray iron for castings intended for use as valve pressure retaining parts, pipe fittings, and flanges.
• ASTM A148 Standard Specification for Steel Castings, High Strength, for Structural Purposes
• ASTM A153 Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
• ASTM A182/A182M Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
• ASTM A193/A193M Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service. Grade b7 Studs bolts & Grade B16 Studs bolts fall in this category are used for high temperature , high-pressure environments like petroleum industry.
• ASTM A194/A194M Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service, or Both
• ASTM A234 Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High-Temperature Service
• ASTM A228 Standard Specification for Steel Wire, Music Spring Quality
• ASTM A240 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
• ASTM A249/A249M Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
• ASTM A255 Standard Test Methods for Determining Hardenability of Steel (Includes JOMINY test)
• ASTM A270 Standard Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing
• ASTM A297 Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application
• ASTM A304 Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
• ASTM A307 Standard Specification for carbon steel bolts and studs ranging from 1/4" through 4" diameter.
• ASTM A312 Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
• ASTM A320/A320M Specification for Alloy/Steel Bolting Materials for Low-Temperature Service
• ASTM A325 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
• ASTM A325M Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength
• ASTM A333 Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness
• ASTM A335Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
• ASTM A350 Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
• ASTM A354 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
• ASTM A370 Standard Testing Methods and Definitions for Mechanical Testing of Steel Products
• ASTM A380 Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems
• ASTM A385 Standard Practice for Providing High-Quality Zinc Coatings (Hot Dip)
• ASTM A490 Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
• ASTM A490M Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints
• ASTM A500 Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
• ASTM A513 Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
• ASTM A514 Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding
• ASTM A516 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower Temperature Service
• ASTM A517 Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered
• ASTM A519 Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
• ASTM A529 Standard Specification for High-Strength Carbon-Maganese Steel of Structural Quality
• ASTM A563 Standard Specification for Carbon and Alloy Steel Nuts
• ASTM A564 Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
• ASTM A568 Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
• ASTM A588 Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance
• ASTM A615/615M Standard Specification for Deformed and Plain Carbon- Steel Bars for Concrete
• ASTM A653 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
• ASTM A706 Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement
• ASTM A743 Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application
• ASTM A759 Standard Specification for Carbon Steel Crane Rails
• ASTM A780 Standard Specification for Repair of Damaged and Uncated Areas of Hot-Dip Galvanized Coatings
• ASTM A786 Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates
• ASTM A820 Standard Specification for Steel Fibers for Fiber-Reinforced Concrete
• ASTM A962/A962M Specification for Common Requirements for Steel Fasteners or Fastener Materials, or Both, Intended for Use at Any Temperature from Cryogenic to the Creep Range
• ASTM A992 Standard Specification for Structural Steel Shapes
• ASTM A994 Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
• ASTM A1008 Standard Specification for Structural Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
• ASTM A1011 Standard Specification for Structural Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
• ASTM A1018 Standard Specification for Structural Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
• ASTM F3125 Standard Specification for High Strength Structural Bolts, Steel and Alloy Steel, Heat Treated, 120 ksi and 150 ksi Minimum Tensile Strength, Inch and Metric Dimensions, which combines previous specifications A325, A325M, A490, A490M, F1852, F2280.^[1]

B

• B1-01 Standard Specification for Hard-Drawn Copper Wire
• B2-08 Standard Specification for Medium-Hard-Drawn Copper Wire
• B3-01(2007) Standard Specification for Soft or Annealed Copper Wire
• B5-00(2005) Standard Specification for High Conductivity Tough-Pitch Copper Refinery Shapes
• B6-08 Standard Specification for Zinc
• B8-04 Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft
• B9-90(2008) Standard Specification for Bronze Trolley Wire
• B16/B16M-05 Standard Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines
• B19-05 Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks
• B21/B21M-06 Standard Specification for Naval Brass Rod, Bar, and Shapes
• B22-08 Standard Specification for Bronze Castings for Bridges and Turntables
• B23-00(2005) Standard Specification for White Metal Bearing Alloys (Known Commercially as "Babbitt Metal")
• B26/B26M-05 Standard Specification for Aluminum-Alloy Sand Castings
• B29-03 Standard Specification for Refined Lead
• B30-09 Standard Specification for Copper Alloys in Ingot Form
• B30-08a Standard Specification for Copper Alloys in Ingot Form CHINESE TRANSLATION
• B32-08 Standard Specification for Solder Metal
• B33-04 Standard Specification for Tinned Soft or Annealed Copper Wire for Electrical Purposes
• B36/B36M-08a Standard Specification for Brass Plate, Sheet, Strip, And Rolled Bar
• B37-08 Standard Specification for Aluminum for Use in Iron and Steel Manufacture
• B39-79(2008) Standard Specification for Nickel
• B42-02e1 Standard Specification for Seamless Copper Pipe, Standard Sizes
• B43-98(2004) Standard Specification for Seamless Red Brass Pipe, Standard Sizes
• B47-95a(2007) Standard Specification for Copper Trolley Wire
• B48-00(2005)e1 Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors
• B49-08a Standard Specification for Copper Rod Drawing Stock for Electrical Purposes
• B61-08 Standard Specification for Steam or Valve Bronze Castings
• B62-09 Standard Specification for Composition Bronze or Ounce Metal Castings
• B63-07 Standard Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials
• B66/B66M-06e1 Standard Specification for Bronze Castings for Steam Locomotive Wearing Parts
• B67-05 Standard Specification for Car and Tender Journal Bearings, Lined
• B68-02 Standard Specification for Seamless Copper Tube, Bright Annealed
• B68M-99(2005) Standard Specification for Seamless Copper Tube, Bright Annealed [Metric]
• B69-08 Standard Specification for Rolled Zinc
• B70-90(2007) Standard Test Method for Change of Resistance With Temperature of Metallic Materials for Electrical Heating
• B75-02 Standard Specification for Seamless Copper Tube
• B75M-99(2005) Standard Specification for Seamless Copper Tube [Metric]
• B76-90(2007) Standard Test Method for Accelerated Life of Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating
• B77-07 Standard Test Method for Thermoelectric Power of Electrical-Resistance Alloys
• B78-90(2007) Standard Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating
• B80-07 Standard Specification for Magnesium-Alloy Sand Castings
• B84-07 Standard Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors
• B85/B85M-08 Standard Specification for Aluminum-Alloy Die Castings
• B86-08 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings
• B88-03 Standard Specification for Seamless Copper Water Tube
• B88M-05 Standard Specification for Seamless Copper Water Tube [Metric]
• B90/B90M-07 Standard Specification for Magnesium-Alloy Sheet and Plate
• B91-07 Standard Specification for Magnesium-Alloy Forgings
• B92/B92M-07 Standard Specification for Unalloyed Magnesium Ingot and Stick For Remelting
• B93/B93M-07 Standard Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings, and Die Castings
• B94-07 Standard Specification for Magnesium-Alloy Die Castings
• B96/B96M-06 Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels
• B98/B98M-08 Standard Specification for Copper-Silicon Alloy Rod, Bar and Shapes
• B99/B99M-06 Standard Specification for Copper-Silicon Alloy Wire for General Applications
• B100-08 Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use
• B101-07 Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction
• B102-00(2005) Standard Specification for Lead- and Tin-Alloy Die Castings
• B103/B103M-09 Standard Specification for Phosphor Bronze Plate, Sheet, Strip, and Rolled Bar
• B105-05 Standard Specification for Hard-Drawn Copper Alloy Wires for Electric Conductors
• B106-08 Standard Test Methods for Flexivity of Thermostat Metals
• B107/B107M-07 Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire
• B108/B108M-08 Standard Specification for Aluminum-Alloy Permanent Mold Castings
• B111/B111M-09 Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock
• B114-07 Standard Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors
• B115-00(2004) Standard Specification for Electrolytic Copper Cathode
• B116-95(2007) Standard Specification for Figure-9 Deep-Grooved and Figure-8 Copper Trolly Wire for Industrial Haulage
• B117 Standard Practice for Operating Salt Spray (Fog) Apparatus
• B121/B121M-01(2006) Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar
• B122/B122M-08 Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar
• B124/B124M-08a Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes
• B127-05 Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip
• B129-07 Standard Specification for Cartridge Brass Cartridge Case Cups
• B130-08 Standard Specification for Commercial Bronze Strip for Bullet Jackets
• B131-07 Standard Specification for Copper Alloy Bullet Jacket Cups
• B134/B134M-08 Standard Specification for Brass Wire
• B135-08a Standard Specification for Seamless Brass Tube
• B135M-08a Standard Specification for Seamless Brass Tube [Metric]
• B136-84(2008)e1 Standard Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum
• B137-95(2004) Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
• B138/B138M-06 Standard Specification for Manganese Bronze Rod, Bar, and Shapes
• B139/B139M-07 Standard Specification for Phosphor Bronze Rod, Bar, and Shapes
• B140/B140M-07 Standard Specification for Copper-Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bar, and Shapes
• B148-97(2003)e1 Standard Specification for Aluminum-Bronze Sand Castings
• B150/B150M-08 Standard Specification for Aluminum Bronze Rod, Bar, and Shapes
• B151/B151M-05 Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar
• B152/B152M-06ae1 Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar
• B153-05 Standard Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing
• B154-05 Standard Test Method for Mercurous Nitrate Test for Copper Alloys
• B159/B159M-05 Standard Specification for Phosphor Bronze Wire
• B160-05e1 Standard Specification for Nickel Rod and Bar
• B161-05e1 Standard Specification for Nickel Seamless Pipe and Tube
• B162-99(2005)e1 Standard Specification for Nickel Plate, Sheet, and Strip
• B163-08 Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes
• B164-03(2008) Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire
• B165-05 Standard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube
• B166-08 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Rod, Bar, and Wire
• B167-08 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Seamless Pipe and Tube
• B168-08 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Plate, Sheet, and Strip
• B169/B169M-05 Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar
• B170-99(2004) Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes
• B171/B171M-09 Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers
• B172-01a(2007)e1 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors
• B173-01a(2007)e1 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors
• B174-02(2007)e1 Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors
• B176-08 Standard Specification for Copper-Alloy Die Castings
• B177-01(2006)e1 Standard Guide for Engineering Chromium Electroplating
• B179-06 Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes
• B183-79(2004)e1 Standard Practice for Preparation of Low-Carbon Steel for Electroplating
• B187/B187M-06 Standard Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar, and Shapes
• B188-02 Standard Specification for Seamless Copper Bus Pipe and Tube
• B189-05 Standard Specification for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical Purposes
• B193-02(2008) Standard Test Method for Resistivity of Electrical Conductor Materials
• B194-08 Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
• B196/B196M-07 Standard Specification for Copper-Beryllium Alloy Rod and Bar
• B197/B197M-07 Standard Specification for Copper-Beryllium Alloy Wire
• B199-07 Standard Specification for Magnesium-Alloy Permanent Mold Castings
• B200-85(2004) Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys
• B201-80(2004) Standard Practice for Testing Chromate Coatings on Zinc and Cadmium Surfaces
• B206/B206M-07 Standard Specification for Copper-Nickel-Zinc (Nickel Silver) Wire and Copper-Nickel Alloy Wire
• B208-06 Standard Practice for Preparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold, Centrifugal, and Continuous Castings
• B208-06 Standard Practice for Preparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold, Centrifugal, and Continuous Castings CHINESE TRANSLATION
• B209-07 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
• B209M-07 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate [Metric]
• B210-04 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes
• B210M-05 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes [Metric]
• B211-03 Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire
• B211M-03 Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire [Metric]
• B212-99(2006) Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
• B213-03 Standard Test Method for Flow Rate of Metal Powders
• B214-07 Standard Test Method for Sieve Analysis of Metal Powders
• B215-08 Standard Practices for Sampling Metal Powders
• B216-97(2003) Standard Specification for Tough-Pitch Fire-Refined Copper—Refinery Shapes
• B221M-07 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes [Metric]
• B221-08 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
• B223-08 Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
• B224-04 Standard Classification of Coppers
• B226-04 Standard Specification for Cored, Annular, Concentric-Lay-Stranded Copper Conductors
• B227-04 Standard Specification for Hard-Drawn Copper-Clad Steel Wire
• B228-04 Standard Specification for Concentric-Lay-Stranded Copper-Clad Steel Conductors
• B229-04 Standard Specification for Concentric-Lay-Stranded Copper and Copper-Clad Steel Composite Conductors
• B230/B230M-07 Standard Specification for Aluminum 1350-H19 Wire for Electrical Purposes
• B231/B231M-04 Standard Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors
• B232/B232M-01e1 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR)
• B233-97(2007) Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes
• B234-04 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers
• B234M-04 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers [Metric]
• B236M-07 Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) [Metric]
• B236-07 Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars)
• B237-01(2006) Standard Specification for Refined Antimony
• B240-07e1 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings
• B241/B241M-02 Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
• B242-99(2004)e1 Standard Guide for Preparation of High-Carbon Steel for Electroplating
• B243-09 Standard Terminology of Powder Metallurgy
• B244-09 Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
• B246-05 Standard Specification for Tinned Hard-Drawn and Medium-Hard-Drawn Copper Wire for Electrical Purposes
• B247-02a Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings
• B247M-02a Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings [Metric]
• B248-07 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar
• B248M-07 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar [Metric]
• B249/B249M-06 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings
• B250/B250M-07 Standard Specification for General Requirements for Wrought Copper Alloy Wire
• B251M-97(2003) Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube [Metric]
• B251-02e1 Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube
• B252-92(2004) Standard Guide for Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings
• B253-87(2005)e1 Standard Guide for Preparation of Aluminum Alloys for Electroplating
• B254-92(2004)e1 Standard Practice for Preparation of and Electroplating on Stainless Steel
• B258-02(2008) Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors
• B263-04 Standard Test Method for Determination of Cross-Sectional Area of Stranded Conductors
• B265-09a Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
• B267-07 Standard Specification for Wire for Use In Wire-Wound Resistors
• B271-08 Standard Specification for Copper-Base Alloy Centrifugal Castings
• B272-07 Standard Specification for Copper Flat Products with Finished (Rolled or Drawn) Edges (Flat Wire and Strip)
• B275-05 Standard Practice for Codification of Certain Nonferrous Metals and Alloys, Cast and Wrought
• B276-05e1 Standard Test Method for Apparent Porosity in Cemented Carbides
• B277-95(2006) Standard Test Method for Hardness of Electrical Contact Materials
• B279-04 Standard Test Method for Stiffness of Bare Soft Square and Rectangular Copper and Aluminum Wire for Magnet Wire Fabrication
• B280-08 Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
• B281-88(2008) Standard Practice for Preparation of Copper and Copper-Base Alloys for Electroplating and Conversion Coatings
• B283-09 Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)
• B286-07 Standard Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment
• B294-92(2006) Standard Test Method for Hardness Testing of Cemented Carbides
• B296-03(2008) Standard Practice for Temper Designations of Magnesium Alloys, Cast and Wrought
• B298-07 Standard Specification for Silver-Coated Soft or Annealed Copper Wire
• B299-08 Standard Specification for Titanium Sponge
• B301/B301M-08 Standard Specification for Free-Cutting Copper Rod, Bar, Wire, and Shapes
• B302-07 Standard Specification for Threadless Copper Pipe, Standard Sizes
• B306-09 Standard Specification for Copper Drainage Tube (DWV)
• B308/B308M-02 Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles
• B311-08 Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity
• B312-96(2002) Standard Test Method for Green Strength for Compacted Metal Powder Specimens
• B313/B313M-02e1 Standard Specification for Aluminum and Aluminum-Alloy Round Welded Tubes
• B315-06 Standard Specification for Seamless Copper Alloy Pipe and Tube
• B316/B316M-02 Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods
• B317/B317M-07 Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor)
• B319-91(2004) Standard Guide for Preparation of Lead and Lead Alloys for Electroplating
• B320-60(2008) Standard Practice for Preparation of Iron Castings for Electroplating
• B322-99(2004) Standard Guide for Cleaning Metals Prior to Electroplating
• B324-01(2007) Standard Specification for Aluminum Rectangular and Square Wire for Electrical Purposes
• B327-09 Standard Specification for Master Alloys Used in Making Zinc Die Casting Alloys
• B328-96(2003)e1 Standard Test Method for Density, Oil Content, and Interconnected Porosity of Sintered Metal Structural Parts and Oil-Impregnated Bearings
• B329-06 Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter
• B330-07 Standard Test Method for Fisher Number of Metal Powders and Related Compounds
• B331-95(2002) Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction
• B333-03(2008) Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip
• B335-03(2008) Standard Specification for Nickel-Molybdenum Alloy Rod
• B338-09 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers
• B339-00(2005) Standard Specification for Pig Tin
• B343-92a(2004)e1 Standard Practice for Preparation of Nickel for Electroplating with Nickel
• B344-01 Standard Specification for Drawn or Rolled Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating Elements
• B345/B345M-02 Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube for Gas and Oil Transmission and Distribution Piping Systems
• B348-09 Standard Specification for Titanium and Titanium Alloy Bars and Billets
• B349/B349M-09 Standard Specification for Zirconium Sponge and Other Forms of Virgin Metal for Nuclear Application
• B350/B350M-02(2006) Standard Specification for Zirconium and Zirconium Alloy Ingots for Nuclear Application
• B351/B351M-08e1 Standard Specification for Hot-Rolled and Cold-Finished Zirconium and Zirconium Alloy Bars, Rod, and Wire for Nuclear Application
• B352/B352M-02(2006) Standard Specification for Zirconium and Zirconium Alloy Sheet, Strip, and Plate for Nuclear Application
• B353-07 Standard Specification for Wrought Zirconium and Zirconium Alloy Seamless and Welded Tubes for Nuclear Service (Except Nuclear Fuel Cladding)
• B354-05 Standard Terminology Relating to Uninsulated Metallic Electrical Conductors
• B355-06 Standard Specification for Nickel-Coated Soft or Annealed Copper Wire
• B359/B359M-02(2006) Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins
• B360-01 Standard Specification for Hard-Drawn Copper Capillary Tube for Restrictor Applications
• B361-08 Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings
• B362-91(2008) Standard Test Method for Mechanical Torque Rate of Spiral Coils of Thermostat Metal
• B363-06a Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings
• B364-96(2009) Standard Specification for Tantalum and Tantalum Alloy Ingots
• B365-98(2004) Standard Specification for Tantalum and Tantalum Alloy Rod and Wire
• B366-04be1 Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings
• B367-09 Standard Specification for Titanium and Titanium Alloy Castings
• B368-09 Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)
• B369-09 Standard Specification for Copper-Nickel Alloy Castings
• B370-09 Standard Specification for Copper Sheet and Strip for Building Construction
• B371/B371M-08 Standard Specification for Copper-Zinc-Silicon Alloy Rod
• B372-97(2003) Standard Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube
• B373-00(2006) Standard Specification for Aluminum Foil for Capacitors
• B374-06 Standard Terminology Relating to Electroplating
• B379-04 Standard Specification for Phosphorized Coppers—Refinery Shapes
• B380-97(2008)e1 Standard Test Method for Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure
• B381-09 Standard Specification for Titanium and Titanium Alloy Forgings
• B386-03 Standard Specification for Molybdenum and Molybdenum Alloy Plate, Sheet, Strip, and Foil
• B387-90(2001) Standard Specification for Molybdenum and Molybdenum Alloy Bar, Rod, and Wire
• B388-06 Standard Specification for Thermostat Metal Sheet and Strip
• B389-81(2008) Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
• B390-92(2006) Standard Practice for Evaluating Apparent Grain Size and Distribution of Cemented Tungsten Carbides
• B391-03 Standard Specification for Niobium and Niobium Alloy Ingots
• B392-03 Standard Specification for Niobium and Niobium Alloy Bar, Rod, and Wire
• B393-05 Standard Specification for Niobium and Niobium Alloy Strip, Sheet, and Plate
• B394-03 Standard Specification for Niobium and Niobium Alloy Seamless and Welded Tubes
• B395/B395M-08 Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes
• B398/B398M-02(2007) Standard Specification for Aluminum-Alloy 6201-T81 Wire for Electrical Purposes
• B399/B399M-04 Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors
• B400-08 Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum 1350 Conductors
• B401-04 Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/COMP)
• B403-07 Standard Specification for Magnesium-Alloy Investment Castings
• B406-96(2005) Standard Test Method for Transverse Rupture Strength of Cemented Carbides
• B407-08a Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube
• B408-06 Standard Specification for Nickel-Iron-Chromium Alloy Rod and Bar
• B409-06e1 Standard Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip
• B411/B411M-08 Standard Specification for Copper-Nickel-Silicon Alloy Rod and Bar
• B413-97a(2008) Standard Specification for Refined Silver
• B415-98(2007) Standard Specification for Hard-Drawn Aluminum-Clad Steel Wire
• B416-98(2007) Standard Specification for Concentric-Lay-Stranded Aluminum-Clad Steel Conductors
• B417-00(2006)e1 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
• B418-08 Standard Specification for Cast and Wrought Galvanic Zinc Anodes
• B422-08a Standard Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper-Nickel-Tin Alloy Sheet and Strip
• B423-05 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825 and N08221)* Seamless Pipe and Tube
• B424-05 Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221)* Plate, Sheet, and Strip
• B425-99(2005) Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221) Rod and Bar
• B427-02 Standard Specification for Gear Bronze Alloy Castings
• B428-09 Standard Test Method for Angle of Twist in Rectangular and Square Copper and Copper Alloy Tube
• B429/B429M-06 Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube
• B430-97(2006)e1 Standard Test Method for Particle Size Distribution of Refractory Metal Powders and Related Compounds by Turbidimetry
• B432-09 Standard Specification for Copper and Copper Alloy Clad Steel Plate
• B434-06 Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, UNS N10242)* Plate, Sheet, and Strip
• B435-06 Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip
• B438-08 Standard Specification for Bronze-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)
• B439-08 Standard Specification for Iron-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)
• B440-00(2005) Standard Specification for Cadmium
• B441-04 Standard Specification for Copper-Cobalt-Beryllium, Copper-Nickel-Beryllium, and Copper-Nickel-Lead-Beryllium Rod and Bar (UNS Nos. C17500, C17510, and C17465)
• B443-00(2005) Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219)* Plate, Sheet, and Strip
• B444-06 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube
• B446-03(2008) Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650)* Rod and Bar
• B447-07 Standard Specification for Welded Copper Tube
• B449-93(2004) Standard Specification for Chromates on Aluminum
• B452-02 Standard Specification for Copper-Clad Steel Wire for Electronic Application
• B453/B453M-08 Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes
• B455-05 Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded Shapes
• B456-03 Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium
• B457-67(2008)e1 Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum
• B462-06 Specification for Forged or Rolled UNS N06030,N06022,N06035,N06200,N06059,N06686,N08020,N08024,N08026,N08367,N10276,N10665, N10675,N10629, N08031,N06045, N06025, & R20033 Alloy Pipe Flanges, Forged Fitting, & Values & Parts for Corrosive
• B463-04 Standard Specification for UNS N08020, UNS N08026, and UNS N08024 Alloy Plate, Sheet, and Strip
• B464-05 Standard Specification for Welded UNS N08020, N08024, and N08026 Alloy Pipe
• B465-04 Standard Specification for Copper-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
• B466/B466M-07 Standard Specification for Seamless Copper-Nickel Pipe and Tube
• B467-88(2003) Standard Specification for Welded Copper-Nickel Pipe
• B468-04 Standard Specification for Welded UNS N08020, N08024, and N08026 Alloy Tubes
• B470-02(2007) Standard Specification for Bonded Copper Conductors for Use in Hookup Wires for Electronic Equipment
• B472-04a Standard Specification for Nickel Alloy Billets and Bars for Reforging
• B473-07 Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire
• B474-03 Standard Specification for Electric Fusion Welded Nickel and Nickel Alloy Pipe
• B475-07 Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Round Weaving Wire
• B476-01(2006) Standard Specification for General Requirements for Wrought Precious Metal Electrical Contact Materials
• B477-97(2008) Standard Specification for Gold-Silver-Nickel Electrical Contact Alloy
• B478-85(2008) Standard Test Method for Cross Curvature of Thermostat Metals
• B479-06 Standard Specification for Annealed Aluminum and Aluminum-Alloy Foil for Flexible Barrier, Food Contact, and Other Applications
• B480-88(2006) Standard Guide for Preparation of Magnesium and Magnesium Alloys for Electroplating
• B481-68(2008) Standard Practice for Preparation of Titanium and Titanium Alloys

for Electroplating

• B482-85(2008) Standard Practice for

Preparation of Tungsten and Tungsten Alloys for Electroplating

• B483/B483M-03 Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Pipe for General Purpose Applications
• B487-85(2007) Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of a Cross Section
• B488-01(2006) Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses
• B489-85(2008)e1 Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals
• B490-09 Standard Practice for Micrometer Bend Test for Ductility of Electrodeposits
• B491/B491M-06 Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications
• B493/B493M-08 Standard Specification for Zirconium and Zirconium Alloy Forgings
• B494/B494M-08 Standard Specification for Primary Zirconium
• B495-05 Standard Specification for Zirconium and Zirconium Alloy Ingots
• B496-04 Standard Specification for Compact Round Concentric-Lay-Stranded Copper Conductors
• B497-00(2006) Standard Guide for Measuring Voltage Drop on Closed Arcing Contacts
• B498/B498M-08 Standard Specification for Zinc-Coated (Galvanized) Steel Core Wire for Use in Overhead Electrical Conductors
• B499-09 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
• B500/B500M-09 Standard Specification for Metallic Coated Stranded Steel Core for Use in Overhead Electrical Conductors
• B501-04 Standard Specification for Silver-Coated, Copper-Clad Steel Wire for Electronic Application
• B502-02(2007) Standard Specification for Aluminum-Clad Steel Core Wire for Aluminum Conductors, Aluminum-Clad Steel Reinforced
• B504-90(2007) Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method
• B505/B505M-08a Standard Specification for Copper Alloy Continuous Castings
• B506-09 Specification for Copper-Clad Stainless Steel Sheet and Strip for Building Construction
• B507-86(2008)e1 Standard Practice for Design of Articles to Be Electroplated on Racks
• B508-08 Standard Specification for Copper Alloy Strip for Flexible Metal Hose
• B511-01(2005) Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes
• B512-04 Standard Specification for Nickel-Chromium-Silicon Alloy (UNS N08330) Billets and Bars
• B514-05 Standard Specification for Welded Nickel-Iron-Chromium Alloy Pipe
• B515-95(2002) Standard Specification for Welded UNS N08120, UNS N08800, UNS N08810, and UNS N08811 Alloy Tubes
• B516-03(2009) Standard Specification for Welded Nickel-Chromium-Iron Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045 Tubes
• B517-05 Standard Specification for Welded Nickel-Chromium-Iron-Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045) Pipe
• B520-93(2007) Standard Specification for Tin-Coated, Copper-Clad Steel Wire for Electronic Application
• B521-98(2004) Standard Specification for Tantalum and Tantalum Alloy Seamless and Welded Tubes
• B522-01(2006) Standard Specification for Gold-Silver-Platinum Electrical Contact Alloy
• B523/B523M-07 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes
• B524/B524M-99(2005) Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Alloy Reinforced (ACAR, 1350/6201)
• B527-06 Standard Test Method for Determination of Tap Density of Metallic Powders and Compounds
• B528-05 Standard Test Method for Transverse Rupture Strength of Metal Powder Specimens
• B530-02 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates
• B532-85(2007) Standard Specification for Appearance of Electroplated Plastic Surfaces
• B533-85(2004) Standard Test Method for Peel Strength of Metal Electroplated Plastics
• B534-07 Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
• B535-06 Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Seamless Pipe and Tube
• B536-07 Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Plate, Sheet, and Strip
• B537-70(2007) Standard Practice for Rating of Electroplated Panels Subjected to Atmospheric Exposure
• B539-02(2008) Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)
• B540-97(2008) Standard Specification for Palladium Electrical Contact Alloy
• B541-01(2006) Standard Specification for Gold Electrical Contact Alloy
• B542-07 Standard Terminology Relating to Electrical Contacts and Their Use
• B543-07e1 Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube
• B545-97(2004)e1 Standard Specification for Electrodeposited Coatings of Tin
• B546-04 Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe
• B547/B547M-02 Standard Specification for Aluminum and Aluminum-Alloy Formed and Arc-Welded Round Tube
• B548-03 Standard Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels
• B549-04 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Clad Steel Reinforced (ACSR/AW)
• B550/B550M-07 Standard Specification for Zirconium and Zirconium Alloy Bar and Wire
• B551/B551M-07 Standard Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate
• B552-08 Standard Specification for Seamless and Welded Copper–Nickel Tubes for Water Desalting Plants
• B555-86(2007) Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by Dropping Test
• B556-90(2007) Standard Guide for Measurement of Thin Chromium Coatings by Spot Test
• B557-06 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
• B557M-07e1 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products [Metric]
• B558-79(2008) Standard Practice for Preparation of Nickel Alloys for Electroplating
• B559-93(2007) Standard Specification for Nickel-Coated, Copper-Clad Steel Wire for Electronic Application
• B560-00(2005) Standard Specification for Modern Pewter Alloys
• B561-94(2005) Standard Specification for Refined Platinum
• B562-95(2005) Standard Specification for Refined Gold
• B563-01(2006) Standard Specification for Palladium-Silver-Copper Electrical Contact Alloy
• B564-06a Standard Specification for Nickel Alloy Forgings
• B565-04 Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods
• B566-04a Standard Specification for Copper-Clad Aluminum Wire
• B567-98(2003) Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method
• B568-98(2004) Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry
• B569-09 Standard Specification for Brass Strip in Narrow Widths and Light Gage for Heat-Exchanger Tubing
• B570-06 Standard Specification for Copper-Beryllium Alloy (UNS Nos. C17000 and C17200) Forgings and Extrusions
• B571-97(2008)e1 Standard Practice for Qualitative Adhesion Testing of Metallic Coatings
• B572-06 Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Rod
• B573-06 Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, N10242)* Rod
• B574-06e1 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod
• B575-06 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Plate, Sheet, and Strip
• B576-94(2005) Standard Guide for Arc Erosion Testing of Electrical Contact Materials
• B577-93(2004)e1 Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper
• B578-87(2004) Standard Test Method for Microhardness of Electroplated Coatings
• B579-73(2004) Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate)
• B580-79(2004) Standard Specification for Anodic Oxide Coatings on Aluminum
• B581-02(2008) Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod
• B582-07 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip
• B584-08a Standard Specification for Copper Alloy Sand Castings for General Applications
• B584-08a Standard Specification for Copper Alloy Sand Castings for General Applications CHINESE TRANSLATION
• B587-08 Standard Specification for Welded Brass Tube
• B588-88(2006) Standard Test Method for Measurement of Thickness of Transparent or Opaque Coatings by Double-Beam Interference Microscope Technique
• B589-94(2005) Standard Specification for Refined Palladium
• B591-09 Standard Specification for Copper-Zinc-Tin and Copper-Zinc-Tin-Iron-Nickel Alloys Plate, Sheet, Strip, and Rolled Bar
• B592-01(2006) Standard Specification for Copper-Zinc-aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
• B593-96(2003)e1 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
• B594-06 Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products for Aerospace Applications
• B595-95(2006) Standard Specification for Sintered Aluminum Structural Parts
• B596-89(2006) Standard Specification for Gold-Copper Alloy Electrical Contact Material
• B598-09 Standard Practice for Determining Offset Yield Strength in Tension for Copper Alloys
• B599-92(2009)e1 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip
• B600-91(2002)e1 Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces
• B601-07 Standard Classification for Temper Designations for Copper and Copper Alloys—Wrought and Cast
• B602-88(2005) Standard Test Method for Attribute Sampling of Metallic and Inorganic Coatings
• B603-07 Standard Specification for Drawn or Rolled Iron-Chromium-Aluminum Alloys for Electrical Heating Elements
• B604-91(2008) Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics
• B605-95a(2004) Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy
• B606-08 Standard Specification for High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced
• B607-91(2008) Standard Specification for Autocatalytic Nickel Boron Coatings for Engineering Use
• B608-07 Standard Specification for Welded Copper-Alloy Pipe
• B609/B609M-99(2004) Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
• B610-08 Standard Test Method for Measuring Dimensional Changes Associated with Processing Metal Powders
• B611-85(2005) Standard Test Method for Abrasive Wear Resistance of Cemented Carbides
• B613-76(2006) Standard Guide for Preparing Specifications for Miniature Brushes of Composite Materials for Sliding Electric Contacts
• B614-05 Standard Practice for Descaling and Cleaning Zirconium and Zirconium Alloy Surfaces
• B615-79(2006) Standard Practice for Measuring Electrical Contact Noise in Sliding Electrical Contacts
• B616-96(2006) Standard Specification for Refined Rhodium
• B617-98(2004) Standard Specification for Coin Silver Electrical Contact Alloy
• B618/B618M-08 Standard Specification for Aluminum-Alloy Investment Castings
• B619-06 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe
• B620-03(2008) Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Plate, Sheet, and Strip
• B621-02(2006) Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod
• B622-06 Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube
• B624-07 Standard Specification for High-Strength, High-Conductivity Copper-Alloy Wire for Electronic Application
• B625-05 Standard Specification for UNS N08925, UNS N08031, UNS N08932, UNS N08926, UNS N08354, and UNS R20033 Plate, Sheet, and Strip
• B626-06 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Tube
• B628-98(2004) Standard Specification for Silver-Copper Eutectic Electrical Contact Alloy
• B629-77(2008) Standard Practice for Preparation of Molybdenum and Molybdenum Alloys for Electroplating
• B630-88(2006) Standard Practice for Preparation of Chromium for Electroplating with Chromium
• B631-93(2004) Standard Specification for Silver-Tungsten Electrical Contact Materials
• B632/B632M-08 Standard Specification for Aluminum-Alloy Rolled Tread Plate
• B633-07 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
• B634-88(2004)e1 Standard Specification for Electrodeposited Coatings of Rhodium for Engineering Use
• B635-00(2004)e1 Standard Specification for Coatings of Cadmium-Tin Mechanically Deposited
• B636-84(2006)e1 Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
• B637-06e1 Standard Specification for Precipitation-Hardening Nickel Alloy Bars, Forgings, and Forging Stock for High-Temperature Service
• B639-02(2008) Standard Specification for Precipitation Hardening Cobalt-Containing Alloys (UNS R30155 and UNS R30816) Rod, Bar, Forgings, and Forging Stock for High-Temperature Service
• B640-07 Standard Specification for Welded Copper Tube for Air Conditioning and Refrigeration Service
• B643-00(2005) Standard Specification for Copper-Beryllium Alloy Seamless Tube
• B644-05 Standard Specification for Copper Alloy Addition Agents
• B645-07 Standard Practice for Linear-Elastic Plane-Strain Fracture Toughness Testing of Aluminum Alloys
• B646-06a Standard Practice for Fracture Toughness Testing of Aluminum Alloys
• B647-84(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
• B648-78(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
• B649-06 Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, UNS N08354, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N Alloy (UNS N08936) Wire
• B650-95(2008) Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates
• B651-83(2006) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope
• B652/B652M-04 Standard Specification for Niobium-Hafnium Alloy Ingots
• B653/B653M-06 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Welding Fittings
• B654/B654M-04 Standard Specification for Niobium-Hafnium Alloy Foil, Sheet, Strip, and Plate
• B655/B655M-04 Standard Specification for Niobium-Hafnium Alloy Bar, Rod, and Wire
• B657-05 Guide for Metallographic Identification of Microstructure in Cemented Carbides
• B658/B658M-06 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe
• B659-90(2008)e1 Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings
• B660-08 Standard Practices for Packaging/Packing of Aluminum and Magnesium Products
• B661-06 Standard Practice for Heat Treatment of Magnesium Alloys
• B662-94(2006) Standard Specification for Silver-Molybdenum Electrical Contact Material
• B663-94(2006) Standard Specification for Silver-Tungsten Carbide Electrical Contact Material
• B664-90(2006) Standard Specification for 80% Silver-20 % Graphite Sliding Contact Material
• B665-08 Standard Guide for Metallographic Sample Preparation of Cemented Tungsten Carbides
• B666/B666M-08 Standard Practice for Identification Marking of Aluminum and Magnesium Products
• B667-97(2009) Standard Practice for Construction and Use of a Probe for Measuring Electrical Contact Resistance
• B668-05 Standard Specification for UNS N08028 Seamless Pipe and Tube
• B670-07 Standard Specification for Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for High-Temperature Service
• B671-81(2005) Standard Specification for Refined Iridium
• B672-02(2007) Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar and Wire
• B673-05e1 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe
• B674-05 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Tube
• B675-02(2007) Standard Specification for UNS N08367 Welded Pipe
• B676-03(2009) Standard Specification for UNS N08367 Welded Tube
• B677-05 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Seamless Pipe and Tube
• B678-86(2006) Standard Test Method for Solderability of Metallic-Coated Products
• B679-98(2004)e1 Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use
• B680-80(2004) Standard Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution
• B682-01 Standard Specification for Standard Metric Sizes of Electrical Conductors
• B683-01(2006) Standard Specification for Pure Palladium Electrical Contact Material
• B684-97(2008) Standard Specification for Platinum-Iridium Electrical Contact Materials
• B685-01(2006) Standard Specification for Palladium-Copper Electrical Contact Material
• B686/B686M-08 Standard Specification for Aluminum Alloy Castings, High-Strength
• B687-99(2005)e1 Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples
• B688-96(2009) Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip
• B689-97(2008) Standard Specification for Electroplated Engineering Nickel Coatings
• B690-02(2007) Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Seamless Pipe and Tube
• B691-02(2007) Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Rod, Bar, and Wire
• B692-90(2006) Standard Specification for 75% Silver-25 % Graphite Sliding Contact Material
• B693-91(2006) Standard Specification for Silver-Nickel Electrical Contact Materials
• B694-03 Standard Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding
• B695-04 Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
• B696-00(2004)e1 Standard Specification for Coatings of Cadmium Mechanically Deposited
• B697-88(2005) Standard Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings
• B698-02 Standard Classification for Seamless Copper and Copper Alloy Plumbing Pipe and Tube
• B699-86(2008) Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel
• B700-08 Standard Specification for Electrodeposited Coatings of Silver for Engineering Use
• B701/B701M-06 Standard Specification for Concentric-Lay-Stranded Self-Damping Aluminum Conductors, Steel Reinforced (ACSR/SD)
• B702-93(2004) Standard Specification for Copper-Tungsten Electrical Contact Material
• B703-05 Standard Test Method for Apparent Density of Powders Using Arnold Meter
• B704-03 Standard Specification for Welded UNS N06625, UNS N06219 and UNS N08825 Alloy Tubes
• B705-05 Standard Specification for Nickel-Alloy (UNS N06625, N06219 and N08825) Welded Pipe
• B706-00(2006) Standard Specification for Seamless Copper Alloy (UNS No. C69100) Pipe and Tube
• B708-05 Standard Specification for Tantalum and Tantalum Alloy Plate, Sheet, and Strip
• B709-04(2009) Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08028)* Plate, Sheet, and Strip
• B710-04 Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Pipe
• B711-05 Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy Conductors, Steel Reinforced (AACSR) (6201)
• B712-93(2006) Standard Guide for Determination of Sodium and Potassium Content For Silver-Cadmium Oxide Contact Materials
• B715-96(2001) Standard Specification for Sintered Copper Structural Parts for Electrical Conductivity Applications
• B717-96(2006) Standard Specification for Refined Ruthenium
• B718-00(2006) Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip
• B719-00(2005) Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Bar
• B722-06 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Seamless Pipe and Tube
• B723-00(2005) Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Pipe
• B724-00(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Newage, Portable, Non-Caliper-Type Instrument
• B725-05 Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Pipe
• B726-02(2006) Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube
• B727-04 Standard Practice for Preparation of Plastics Materials for Electroplating
• B729-05 Standard Specification for Seamless UNS N08020, UNS N08026, and UNS N08024 Nickel-Alloy Pipe and Tube
• B730-08 Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Tube
• B731-96(2006) Standard Specification for 60% Palladium-40 % Silver Electrical Contact Material
• B733-04 Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal
• B734-97(2008) Standard Specification for Electrodeposited Copper for Engineering Uses
• B735-06 Standard Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor
• B736-00(2006) Standard Specification for Aluminum, Aluminum Alloy and Aluminum-Clad Steel Cable Shielding Stock
• B737-05 Standard Specification for Hot-Rolled and/or Cold-Finished Hafnium Rod and Wire
• B738-03(2008) Standard Specification for Fine-Wire Bunch-Stranded and Rope-Lay Bunch-Stranded Copper Conductors for Use as Electrical Conductors
• B739-03(2008) Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Tube
• B740-02 Standard Specification for Copper-Nickel-Tin Spinodal Alloy Strip
• B742-90(2006) Standard Specification for Fine Silver Electrical Contact Fabricated Material
• B743-06 Standard Specification for Seamless Copper Tube in Coils
• B744/B744M-05 Standard Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe
• B745/B745M-97(2005) Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains
• B746/B746M-02(2007) Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches
• B747-07 Standard Specification for Copper-Zirconium Alloy Sheet and Strip
• B748-90(2006) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
• B749-03 Standard Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products
• B750-08 Standard Specification for GALFAN (Zinc-5 % Aluminum-Mischmetal) Alloy in Ingot Form for Hot-Dip Coatings
• B751-08 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Tube
• B752-06 Standard Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application
• B753-07 Standard Specification for Thermostat Component Alloys
• B754-89(2005) Standard Test Method for Measuring and Recording the Deviations from Flatness in Copper and Copper Alloy Strip
• B755-00(2006) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Plate, Sheet, and Strip
• B756-00(2006) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06110) Rod and Bar
• B757-00(2006) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten-Alloys (UNS N06110) Welded Pipe
• B758-00(2006) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Welded Tube
• B759-00(2006) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Pipe and Tube
• B760-07 Standard Specification for Tungsten Plate, Sheet, and Foil
• B761-06 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
• B762-90(2005) Standard Test Method of Variables Sampling of Metallic and Inorganic Coatings
• B763-08a Standard Specification for Copper Alloy Sand Castings for Valve Applications
• B764-04 Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)
• B765-03(2008) Standard Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings
• B766-86(2008) Standard Specification for Electrodeposited Coatings of Cadmium
• B767-88(2006) Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
• B768-99(2004) Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip and Sheet
• B769-07 Standard Test Method for Shear Testing of Aluminum Alloys
• B770-08 Standard Specification for Copper-Beryllium Alloy Sand Castings for General Applications
• B771-87(2006) Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides
• B772-97(2008) Standard Guide for Specifying the Chemical Compositions for Electrical Contact Materials (Arcing and Nonarcing)
• B773-96(2008) Standard Guide for Ultrasonic C-Scan Bond Evaluation of Brazed or Welded Electrical Contact Assemblies
• B774-00(2005)e1 Standard Specification for Low Melting Point Alloys
• B775-08 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Pipe
• B776-07 Standard Specification for Hafnium and Hafnium Alloy Strip, Sheet, and Plate
• B777-07 Standard Specification for Tungsten Base, High-Density Metal
• B778-02(2007) Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors (AAC/TW)
• B779-03 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/TW)
• B780-98(2004) Standard Specification for 75% Silver, 24.5% Copper, 0.5% Nickel Electrical Contact Alloy
• B781-93a(2006) Standard Guide for Silver-Cadmium Oxide Contact Material
• B783-04 Standard Specification for Materials for Ferrous Powder Metallurgy (P/M) Structural Parts
• B784-01(2006) Standard Specification for Modified Concentric-Lay-Stranded Copper Conductors for Use in Insulated Electrical Cables
• B786-08 Standard Specification for 19 Wire Combination Unilay-Stranded Aluminum Conductors for Subsequent Insulation
• B787/B787M-04 Standard Specification for 19 Wire Combination Unilay-Stranded Copper Conductors for Subsequent Insulation
• B788/B788M-04 Standard Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe
• B789/B789M-99(2005) Standard Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers
• B790/B790M-00(2006) Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits
• B792-08 Standard Specification for Zinc Alloys in Ingot Form for Slush Casting
• B793-08 Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds
• B794-97(2009) Standard Test Method for Durability Wear Testing of Separable Electrical Connector Systems Using Electrical Resistance Measurements
• B795-07 Standard Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged (PF) Steel Materials
• B796-07 Standard Test Method for Nonmetallic Inclusion Content of Powders Intended for Powder Forging (PF) Applications
• B797-93(2007) Standard Test Method for Surface Finger Oxide Penetration Depth and Presence of Interparticle Oxide Networks in Powder Forged (P/F) Steel Parts
• B798-95(2005) Standard Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography
• B799-95(2005) Standard Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur-Dioxide Vapor
• B800-05 Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes-Annealed and Intermediate Tempers
• B801-07 Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation
• B802/B802M-08 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR)
• B803-08 Standard Specification for High-Strength Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors
• B804-02(2007) Standard Specification for UNS N08367 and UNS N08926 Welded Pipe
• B805-06 Standard Specification for Precipitation Hardening Nickel Alloys Bar and Wire
• B806-08a Standard Specification for Copper Alloy Permanent Mold Castings for General Applications
• B806-08a Standard Specification for Copper Alloy Permanent Mold Castings for General Applications CHINESE TRANSLATION
• B807/B807M-06 Standard Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys
• B808-05 Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances
• B809-95(2008) Standard Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor (「Flowers-of-Sulfur」
• B810-01a(2006) Standard Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons
• B811-02(2007) Standard Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding
• B812-96(2008) Standard Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications
• B813-00(2009) Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube
• B814-06 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy (UNS N06920) Plate, Sheet, and Strip
• B815-02(2006) Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod
• B816-00(2004)e1 Standard Specification for Coatings of Cadmium-Zinc Mechanically Deposited
• B817-08 Standard Specification for Powder Metallurgy (P/M) Titanium Alloy Structural Components
• B818-03(2008) Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Plate, Sheet and Strip
• B819-00(2006) Standard Specification for Seamless Copper Tube for Medical Gas Systems
• B820-09 Standard Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip
• B821-02(2007) Standard Guide for Liquid Dispersion of Metal Powders and Related Compounds for Particle Size Analysis
• B822-02 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering
• B823-01 Standard Specification for Materials for Nonferrous Powder Metallurgy (P/M) Structural Parts
• B824-09 Standard Specification for General Requirements for Copper Alloy Castings
• B824-04 Standard Specification for General Requirements for Copper Alloy Castings CHINESE TRANSLATION
• B825-02(2008) Standard Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples
• B826-03 Standard Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes
• B827-05 Standard Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests
• B828-02 Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings
• B829-04a(2009) Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube
• B830-97(2003) Standard Specification for Uniform Test Methods and Frequency
• B831-05 Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
• B832-93(2008) Standard Guide for Electroforming with Nickel and Copper
• B833-06 Standard Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) for the Corrosion Protection of Steel
• B834-95(2003) Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves, and Parts
• B835-04 Standard Specification for Compact Round Stranded Copper Conductors Using Single Input Wire Construction
• B836-00(2005) Standard Specification for Compact Round Stranded Aluminum Conductors Using Single Input Wire Construction
• B837-01 Standard Specification for Seamless Copper Tube for Natural Gas and Liquefied Petroleum (LP) Gas Fuel Distribution Systems
• B839-04 Standard Test Method for Residual Embrittlement in Metallic Coated, Externally Threaded Articles, Fasteners, and Rod—Inclined Wedge Method
• B840-99(2004) Standard Specification for Electrodeposited Coatings for Zinc Cobalt Alloy Deposits
• B841-99(2004) Standard Specification for Electrodeposited Coatings for Zinc Nickel Alloy Deposits
• B842-99(2005) Standard Specification for Electrodeposited Coatings for Zinc Iron Alloy Deposits
• B843-07 Standard Specification for Magnesium Alloy Anodes for Cathodic Protection
• B844-98(2004) Standard Guide for Silver-Tin Oxide Contact Material
• B845-97(2008)e1 Standard Guide for Mixed Flowing Gas (MFG) Tests for Electrical Contacts
• B846-06a Standard Terminology for Copper and Copper Alloys
• B846-06a Standard Terminology for Copper and Copper Alloys CHINESE TRANSLATION
• B848-05 Specification for Powder Forged (P/F) Ferrous Materials
• B849-02(2007) Standard Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement
• B850-98(2004) Standard Guide for Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement
• B851-04 Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish
• B852-08 Standard Specification for Continuous Galvanizing Grade (CGG) Zinc Alloys for Hot-Dip Galvanizing of Sheet Steel
• B853-07 Standard Specification for Powder Metallurgy (PM) Boron Stainless Steel Structural Components
• B854-98(2004) Standard Guide for Measuring Electrical Contact Intermittences
• B855-06 Standard Test Method for Volumetric Flow Rate of Metal Powders Using Arnold Meter and Hall Funnel
• B856-03 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated Steel Supported (ACSS)
• B857-09 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Supported (ACSS/TW)
• B858-06 Standard Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys
• B859-03(2008)e1 Standard Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis
• B860-09 Standard Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing
• B861-08a Standard Specification for Titanium and Titanium Alloy Seamless Pipe
• B862-09 Standard Specification for Titanium and Titanium Alloy Welded Pipe
• B863-09 Standard Specification for Titanium and Titanium Alloy Wire
• B864/B864M-08 Standard Specification for Corrugated Aluminum Box Culverts
• B865-04 Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock
• B866-95(2008) Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion
• B867-95(2008) Standard Specification for Electrodeposited Coatings of Palladium-Nickel for Engineering Use
• B868-96(2008) Standard Practice for Contact Performance Classification of Electrical Connection Systems
• B869-07 Standard Specification for Copper-Clad Steel Electrical Conductor for CATV Drop Wire
• B870-08 Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions Alloys (UNS Nos. C17500 and C17510)
• B871-01(2007) Standard Test Method for Tear Testing of Aluminum Alloy Products
• B872-06 Standard Specification for Precipitation-Hardening Nickel Alloys Plate, Sheet, and Strip
• B873-01(2007) Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417
• B874-96(2008) Standard Specification for Chromium Diffusion Coating Applied by Pack Cementation Process
• B875-96(2008) Standard Specification for Aluminum Diffusion Coating Applied by Pack Cementation Process
• B877-96(2008) Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by the Phosphomolybdic Acid (PMA) Method
• B878-97(2009) Standard Test Method for Nanosecond Event Detection for Electrical Contacts and Connectors
• B879-97(2008)e1 Standard Practice for Applying Non-Electrolytic Conversion Coatings on Magnesium and Magnesium Alloys
• B880-03(2008) Standard Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys
• B881-05 Standard Terminology Relating to Aluminum- and Magnesium- Alloy Products
• B882-05 Specification for Pre-Patinated Copper for Architectural Applications
• B883-05 Standard Specification for Metal Injection Molding (MIM) Ferrous Materials
• B884-05 Standard Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications
• B885-09 Standard Test Method for Presence of Foreign Matter on Printed Wiring Board Contacts
• B886-03(2008) Standard Test Method for Determination of Magnetic Saturation (Ms) of Cemented Carbides
• B887-03(2008)e1 Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides
• B888-08 Standard Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring Contacts
• B890-07 Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
• B891-98(2004) Standard Specification for Seamless and Welded Titanium and Titanium Alloy Condenser and Heat Exchanger Tubes With Integral Fins
• B892-03 Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy in Ingot Form for Die Castings
• B893-98(2008) Standard Specification for Hard-Coat Anodizing of Magnesium for Engineering Applications
• B894-03 Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy Die Castings
• B895-05 Test Methods for Evaluating the Corrosion Resistance of Stainless Steel Powder Metallurgy (P/M) Parts/Specimens by Immersion in a Sodium Chloride Solution
• B896-99(2005) Standard Test Methods for Evaluating Connectability Characteristics of Electrical Conductor Materials
• B897-03 Standard Specification for Configuration of Zinc and Zinc Alloy Jumbo and Block Ingot
• B898-05e1 Standard Specification for Reactive and Refractory Metal Clad Plate
• B899-06 Standard Terminology Relating to Non-ferrous Metals and Alloys
• B900-04 Standard Practice for Packaging of Copper and Copper Alloy Mill Products for U.S. Government Agencies
• B901-04 Standard Specification for Compressed Round Stranded Aluminum Conductors Using Single Input Wire Construction
• B902-04a Standard Specification for Compressed Round Stranded Copper Conductors, Hard, Medium-Hard, or Soft Using Single Input Wire Construction
• B903-00(2005) Standard Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement
• B904-00(2004) Standard Specification for Autocatalytic Nickel over Autocatalytic Copper for Electromagnetic Interference Shielding
• B905-00(2005) Standard Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test
• B906-02(2006) Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip
• B907-05 Standard Specification for Zinc, Tin and Cadmium Base Alloys Used as Solders
• B908-03(2008) Standard Practice for the Use of Color Codes for Zinc Casting Alloy Ingot
• B909-00(2006) Standard Guide for Plane Strain Fracture Toughness Testing of Non-Stress Relieved Aluminum Products
• B910/B910M-07 Standard Specification for Annealed Copper-Clad Steel Wire
• B911/B911M-05 Standard Specification for ACSR Twisted Pair Conductor (ACSR/TP)
• B912-02(2008)e1 Standard Specification for Passivation of Stainless Steels Using Electropolishing
• B913-05 Standard Test Method for Evaluation of Crimped Electrical Connections to 16-Gauge and Smaller Diameter Stranded and Solid Conductors
• B914-03(2008) Standard Practice for Color Codes on Zinc and Zinc Alloy Ingot for Use in Hot-Dip Galvanizing of Steel
• B915-01(2007) Standard Test Method for Measuring Static Heat Resistance of Self-Cleaning Oven Coating
• B916-01(2007) Standard Test Method for Adherence of Porcelain Enamel Coatings to Sheet Metal
• B917/B917M-08 Standard Practice for Heat Treatment of Aluminum-Alloy Castings from All Processes
• B918/B918M-09 Standard Practice for Heat Treatment of Wrought Aluminum Alloys
• B919-01(2006) Standard Specification for Welded Copper Heat Exchanger Tubes With Internal Enhancement
• B920-01(2006)e1 Standard Practice for Porosity in Gold and Palladium Alloy Coatings on Metal Substrates by Vapors of Sodium Hypochlorite Solution
• B921-08 Standard Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys
• B922-02(2008) Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
• B923-02(2008) Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry
• B924-02(2006) Standard Specification for Seamless and Welded Nickel Alloy Condenser and Heat Exchanger Tubes With Integral Fins
• B925-08 Standard Practices for Production and Preparation of Powder Metallurgy (PM) Test Specimens
• B926-03 Standard Method for Pinhole Determination in Aluminum and Aluminum Alloy Plain Foil by Means of a Light Table
• B927/B927M-08a Standard Specification for Brass Rod, Bar, and Shapes
• B928/B928M-07 Standard Specification for High Magnesium Aluminum-Alloy Sheet and Plate for Marine Service and Similar Environments
• B929-05 Standard Specification for Copper-Nickel-Tin Spinodal Alloy Rod and Bar
• B930-03(2008) Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
• B931-09 Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy (P/M) Parts
• B932-04 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum-Gadolinium Alloy Plate, Sheet, and Strip
• B933-09 Standard Test Method for Microindentation Hardness of Powder Metallurgy (P/M) Materials
• B934-04a Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (P/M) Parts Using Microindentation Hardness Measurements
• B935-05 Standard Guide for Steam Treatment of Ferrous Powder Metallurgy (P/M) Materials
• B936-08 Standard Specification for Copper-Chromium-Iron-Titanium Alloy Plate, Sheet, Strip and Rolled Bar
• B937-04 Standard Specification for Copper-Beryllium Seamless Tube (UNS Nos. C17500 and C17510)
• B938-04 Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions (UNS Nos. C17500 and C17510)
• B939-05 Standard Test Method for Radial Crushing Strength, K, of Powder Metallurgy (P/M) Bearings and Structural Materials
• B940-05 Standard Practice for Testing Non-Chromate Coatings on Zinc and Cadmium Surfaces
• B941-05 Standard Specification for Heat Resistant Aluminum-Zirconium Alloy Wire for Electrical Purposes
• B942-05 Standard Guide for Specification and Quality Assurance for the Electrical Contact Performance of Crimped Wire Terminations
• B943-05 Standard Specification for Zinc and Tin Alloy Wire Used in Thermal Spraying for Electronic Applications
• B944-06 Standard Specification for Copper-Beryllium Welded Heat Exchanger and Condenser Tube (UNS No. C17510)
• B945-06 Standard Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature Shaping Process for Production of T1, T2, T5 and T10-Type Tempers
• B946-06 Standard Test Method for Surface Finish of Powder Metallurgy (P/M) Products
• B947-06 Standard Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate
• B949-08 Standard Specification for General Requirements for Zinc and Zinc Alloy Products
• B950-06 Standard Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys
• B951-08 Standard Practice for Codification of Unalloyed Magnesium and Magnesium-Alloys, Cast and Wrought
• B952-08 Standard Specification for Zinc Alloys in Ingot Form for Spin Casting
• B953-07 Standard Practice for Sampling Magnesium and Magnesium Alloys for Spectrochemical Analysis
• B954-07 Standard Test Method for Analysis of Magnesium and Magnesium Alloys by Atomic Emission Spectrometry
• B955/B955M-08 Standard Specification for Aluminum-Alloy Centrifugal Castings
• B956-07e2 Standard Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with Integral Fins
• B957-08 Standard Specification for Extra-High-Strength and Ultra-High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Overhead Electrical Conductors
• B958-08 Standard Specification for Extra-High-Strength and Ultra-High-Strength Class A Zinc–5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors
• B960-08 Standard Specification for Prime Western Grade-Recycled (PWG-R) Zinc
• B961-08 Standard Specification for Silver Coated Copper and Copper Alloy Stranded Conductors for Electronic Space Application
• B962-08 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes' Principle
• B963-08 Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Interconnected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes' Principle
• B964-09 Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel
• B965-09 Standard Specification for High Performance Tin-Coated Annealed Copper Wire Intended for Electrical and Electronic Application for Solderability
• B967/B967M-09 Standard Specification for Copper-Zinc-Tin-Bismuth Alloy Rod, Bar and Wire

C

• ASTM C 33 Standard Test Method for Fine and coarse aggregates
• ASTM C 39 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
• ASTM C 91 Cement Standards and Concrete Standards
• ASTM C 91 - 05 Standard Specification for Masonry Cement
• ASTM C 150 Standard Specification for Portland Cement
• ASTM C 309 Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete
• ASTM C 618 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
• ASTM C 876 Standard Test Method for Half-Cell Potential of uncoated reinforcing steel in concrete
• ASTM C 813-90 Standard Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement
• ASTM C 857-14 Standard Practice for Minimum Structural Design Loading for Underground Precast Concrete Utility Structures
• ASTM C 926 Standard Specification for Application of Portland Cement-Based Plaster
• ASTM C 955 Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks), and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases
• ASTM C 1112 Standard Guide for Application of Radiation Monitors to the Control and Physical Security of Special Nuclear Material
• ASTM C 1202 Standard Test Method for Electrical Indication of Chloride's Ability to Resist Chloride Ion Penetration
• ASTM C 1270 Standard Practice for Detection Sensitivity Mapping of In-Plant Walk-Through Metal Detectors
• ASTM C 1271 Standard Test Method for X-Ray Spectrometric Analysis of Lime and Limestone
• ASTM C 1321 - 04 Standard Practice for Installation and Use of Interior Radiation Control Coating Systems (IRCCS) in Building Construction
• ASTM C 1349 Standard Specification for Architectural Flat Glass Clad Polycarbonate

D

• ASTM D86 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
• ASTM D149 Dielectric Strength
• ASTM D150 Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
• ASTM D256 Impact Strength
• ASTM D4123-82(1995) Standard Test Method for Indirect Tension Test for Resilient Modulus of Bituminous Mixtures
• ASTM D531 -00(2010) Standard Test Method for Rubber Property-Pusey and Jones Indentation
• ASTM D1003 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
• ASTM D543 Chemical Resistance
• ASTM D570 Water Absorption
• ASTM D1056 Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber
• ASTM D1140 - 14 Standard Test Methods for Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing
• ASTM D1044 Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion
• ASTM D1457 Elongation
• ASTM D1556 / D1556M - 15 Standard Test Method for Density and Unit Weight of Soil in Place by Sand-Cone Method
• ASTM D1557 - 12 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))
• ASTM D1883 - 14 Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils
• ASTM D1708 Tensile Strength
• ASTM D1746 Standard Test Method for Transparency of Plastic Sheeting
• ASTM D1894 Coefficient of Friction
• ASTM D2166 / D2166M - 13 Standard Test Method for Unconfined Compressive Strength of Cohesive Soil
• ASTM D2216 - 10 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
• ASTM D2240 Hardness
• ASTM D2412 Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
• ASTM D2434-68(2006) Standard Test Method for Permeability of Granular Soils (Constant Head) (Withdrawn 2015)
• ASTM D2435 / D2435M - 11 Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading
• ASTM D2487 - 11 Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)
• ASTM D2488 - 09a Standard Practice for Description and Identification of Soils (Visual-Manual Procedure) [ds/D2488.htm
• ASTM D3740 - 12a Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
• ASTM D3786 Bursting strength for Knit fabric and non woven material
• ASTM D2244 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
• ASTM D3566 Standard Practice for Rubber—Determination of Bromine in the Presence of Chlorine by Oxygen Combustion
• ASTM D421 - 85(2007) Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants
• ASTM D422 - 63(2007)e2 Standard Test Method for Particle-Size Analysis of Soils
• ASTM D4220 / D4220M - 14 Standard Practices for Preserving and Transporting Soil Samples
• ASTM D4236 - 94(2005) Standard Practice for Labeling Art Materials for Chronic Health Hazards
• ASTM D4318 - 10e1 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
• ASTM D4356 Standard Practice for Establishing Consistent Test Method Tolerances
• ASTM D5084 - 10 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
• ASTM D5116 Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions From Indoor Materials/Products
• ASTM D5162-08 Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates
• ASTM D5375 Standard Test Methods for Liner removal at High Speeds from Pressure-Sensitive Label Stock
• ASTM D5800 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
• ASTM D6252 Standard Test Method for Peel Adhesion of Pressure Sensitive Label Stocks at 90 deg Angle
• ASTM D6284 Standard Test Method for Rubber Property—Effect of Aqueous Solutions with Available Chlorine and Chloramine
• ASTM D6484 Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
• ASTM D6624 Standard Practice for Determining a Flow-Proportioned Average Property Value (FPAPV)
• ASTM D6712 Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes
• ASTM D6751 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
• ASTM D6938 - 10 Standard Test Method for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
• ASTM D698 - 12e1 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3))
• ASTM D6913 - 04(2009)e1 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
• ASTM D7240 Standard Practice for Leak Location using Geomembranes with an Insulating Layer in Intimate Contact with a Conductive Layer via Electrical Capacitance Technique (Conductive Geomembrane Spark Test)
• ASTM D7298-06 Standard Test Method for Measurement of Comparative Legibility by Means of Polarizing Filter Instrumentation
• ASTM D7483 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
• ASTM D7490 Standard Test Method for Measurement of the Surface Tension of Solid Coatings, Substrates and Pigments using Contact Angle Measurements
• ASTM D7547 Aviation fuel U91
• ASTM D854 - 14 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer

E

• ASTM E8 Standard Test Methods for Tension Testing of Metallic Materials
• ASTM E18 Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials
• ASTM E21 Test Methods for Elevated Temperature Tension Tests of Metallic Materials
• ASTM E31 Healthcare Informatics
• ASTM E84 Standard Test Method for Surface Burning Characteristics of Building Materials
• ASTM E96 Standard Test Methods for Water Vapor Transmission of Materials
• ASTM E112 Test Methods for Determining Average Grain Size
• ASTM E119 Standard Test Methods for Fire Tests of Building Construction and Materials
• ASTM E139 Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials
• ASTM E150 Practice for Conducting Creep and Creep-Rupture Tension Tests of Metallic Materials Under Conditions of Rapid Heating and Short Times
• ASTM E151 Practice for Tension Tests of Metallic Materials at Elevated Temperatures with Rapid Heating and Conventional or Rapid Strain Rates
• ASTM E165 Standard Practice for Liquid Penetrant Examination
• ASTM E290 Standard Test Methods for Bend Testing of Material for Ductility
• ASTM E292 Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials
• ASTM E328 Methods for Stress-Relaxation Tests for Materials and Structures
• ASTM E381 Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings
• ASTM E407 Standard Practice for Microetching Metals and Alloys ^[2]
• ASTM E460 Practice for Determining Effect of Packaging on Food and Beverage Products During Storage
• ASTM E566 Practice for Electromagnetic (Eddy-Current) Sorting of Ferrous Metals
• ASTM E313 Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates
• ASTM E691 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
• ASTM E779 Standard Test Method for Determining Air Leakage Rate by Fan Pressurization
• ASTM E903 Standard Test Method for Solar Absorbance, Reflectance and Transmittance of Materials Using Integrating Spheres
• ASTM E1417 Standard Practice for Liquid Penetrant Testing
• ASTM E1444 Standard Practice for Magnetic Particle Testing
• ASTM E1155 Standard Test Method for Determining F_F Flatness and F_L Levelness Numbers, pertaining primarily to cast-in-place concrete floors
• ASTM E1169 Standard Guide for Conducting Ruggedness Tests
• ASTM E1316: "Standard Terminology for Nondestructive Examinations"
• ASTM E1488 Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods
• ASTM E1558 Standard Guide for Electrolytic Polishing of Metallographic Specimens
• ASTM E1714
• ASTM E1751 Standard Guide for Temperature Electromotive Force (emf) Tables for Non-Letter Designated Thermocouple Combinations
• ASTM E1870 Test Method for Odor and Taste Transfer from Polymeric Packaging Film
• ASTM E2395
• ASTM E2500 Standard Guide for Specification, Design, and Verification of Pharmaceutical and Biopharmaceutical Manufacturing Systems and Equipment
• ASTM E2691 Standard Practice for Job Productivity Measurement

F

• ASTM F86 Standard Practice for Surface Preparation and Marking of Metallic Surgical Implants
• ASTM F136 Standard Specification for Wrought Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications
• ASTM F432 Standard Specification for Roof and Rock Bolts and Accessories
• ASTM F436 Standard Specification for Hardened Steel Washers
• ASTM F436M Standard Specification for Hardened Steel Washers (Metric)
• ASTM F568M Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners. Withdrawn January 2012 due to ISO 898-1.^[3]
• ASTM F 571
• ASTM F 606 Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets
• ASTM F 626
• ASTM F 792 Standard Practice for Evaluating the Imaging Performance of Security X-Ray Systems
• ASTM F 883
• ASTM F 899-12 Standard Specification for Wrought Stainless Steels for Surgical Instruments
• ASTM F 963 Standard Consumer Safety Specification for Toy Safety. See ASTM F 963
• ASTM F 1450
• ASTM F 1577
• ASTM F 1592
• ASTM F 1643
• ASTM F 1712
• ASTM F 1915
• ASTM F 1929 Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration
• ASTM F 2043 Standard Classification for Bicycle Usage
• ASTM F 2248
• ASTM F 2322
• ASTM F 2348
• ASTM F 2412 - 05 Standard Test Methods for Foot Protection. See ASTM F 2412
• ASTM F 2413 - 05 Standard Specification for Performance Requirements for Foot Protection. See ASTM F 2413
• ASTM F 2761 - 09 Essential safety requirements for equipment comprising the patient-centric integrated clinical environment (ICE) — Part 1: General requirements and conceptual model
• ASTM F 3159 - 15 Standard Safety Specification for Liquid Laundry Packets. See ASTM F 3159

G

• G1 Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens
• G2 Standard Test Method for Corrosion Testing of Products of Zirconium, Hafnium, and Their Alloys in Water at 680 °F [360 °C]or in Steam at 750 °F [400 °C]
• G3 Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing
• G4 Standard Guide for Conducting Corrosion Tests in Field Applications
• G5 Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements
• G6 Test Method for Abrasion Resistance of Pipeline Coatings
• G7 Standard Practice for Atmospheric Environmental Exposure Testing of Nonmetallic Materials
• G8 Standard Test Methods for Cathodic Disbonding of Pipeline Coatings
• G9 Standard Test Method for Water Penetration into Pipeline Coatings
• G10 Standard Test Method for Specific Bendability of Pipeline Coatings
• G11 Standard Test Method for Effects of Outdoor Weathering on Pipeline Coatings
• G12 Standard Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel
• G14 Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
• G15 Standard Terminology Relating to Corrosion and Corrosion Testing
• G16 Standard Guide for Applying Statistics to Analysis of Corrosion Data
• G17 Standard Test Method for Penetration Resistance of Pipeline Coatings (Blunt Rod)
• G18 Standard Test Method for Joints, Fittings, and Patches in Coated Pipelines
• G19 Standard Test Method for Disbonding Characteristics of Pipeline Coatings by Direct Soil Burial
• G20 Standard Test Method for Chemical Resistance of Pipeline Coatings
• G21 Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
• G24 Standard Practice for Conducting Exposures to Daylight Filtered Through Glass
• G28 Standard Test Methods for Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys
• G29 Standard Practice for Determining Algal Resistance of Plastic Films
• G30 Standard Practice for Making and Using U-Bend Stress-Corrosion Test Specimens
• G31 Standard Practice for Laboratory Immersion Corrosion Testing of Metals
• G32 Standard Test Method for Cavitation Erosion Using Vibratory Apparatus
• G33 Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens
• G34 Standard Test Method for Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test)
• G35 Standard Practice for Determining the Susceptibility of Stainless Steels and Related Nickel-Chromium-Iron Alloys to Stress-Corrosion Cracking in Polythionic Acids
• G36 Standard Practice for Evaluating Stress-Corrosion-Cracking Resistance of Metals and Alloys in a Boiling Magnesium Chloride Solution
• G37 Standard Practice for Use of Mattsson's Solution of pH 7.2 to Evaluate the Stress- Corrosion Cracking Susceptibility of Copper-Zinc Alloys
• G38 Standard Practice for Making and Using C-Ring Stress-Corrosion Test Specimens
• G39 Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens
• G40 Standard Terminology Relating to Wear and Erosion
• G41 Standard Practice for Determining Cracking Susceptibility of Metals Exposed Under Stress to a Hot Salt Environment
• G42 Standard Test Method for Cathodic Disbonding of Pipeline Coatings Subjected to Elevated Temperatures
• G44 Standard Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5% Sodium Chloride Solution
• G46 Standard Guide for Examination and Evaluation of Pitting Corrosion
• G47 Standard Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products
• G48 Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
• G49 Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens
• G50 Standard Practice for Conducting Atmospheric Corrosion Tests on Metals
• G51 Standard Test Method for Measuring pH of Soil for Use in Corrosion Testing
• G52 Standard Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater
• G55 Standard Test Method for Evaluating Pipeline Coating Patch Materials
• G56 Standard Test Method for Abrasiveness of Ink-Impregnated Fabric Printer Ribbons
• G57 Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method
• G58 Standard Practice for Preparation of Stress-Corrosion Test Specimens for Weldments
• G59 Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
• G60 Standard Practice for Conducting Cyclic Humidity Exposures
• G61 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys
• G62 Standard Test Methods for Holiday Detection in Pipeline Coatings
• G63 Standard Guide for Evaluating Nonmetallic Materials for Oxygen Service
• G64 Standard Classification of Resistance to Stress-Corrosion Cracking of Heat-Treatable Aluminum Alloys
• G65 Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus
• G66 Standard Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys (ASSET Test)
• G67 Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test)
• G69 Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys
• G70 Standard Test Method for Ring Bendability of Pipeline Coatings (Squeeze Test)
• G71 Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes
• G72 Standard Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment
• G73 Standard Practice for Liquid Impingement Erosion Testing
• G74 Standard Test Method for Ignition Sensitivity of Materials to Gaseous Fluid Impact
• G75 Standard Test Method for Determination of Slurry Abrasivity (Miller Number) and Slurry Abrasion Response of Materials (SAR Number)
• G76 Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets
• G77 Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test
• G78 Standard Guide for Crevice Corrosion Testing of Iron-Base and Nickel-Base Stainless Alloys in Seawater and Other Chloride-Containing Aqueous Environments
• G80 Standard Test Method for Specific Cathodic Disbonding of Pipeline Coatings
• G81 Standard Test Method for Jaw Crusher Gouging Abrasion Test
• G82 Standard Guide for Development and Use of a Galvanic Series for Predicting Galvanic Corrosion Performance
• G84 Standard Practice for Measurement of Time-of-Wetness on Surfaces Exposed to Wetting Conditions as in Atmospheric Corrosion Testing
• G85 Standard Practice for Modified Salt Spray (Fog) Testing
• G86 Standard Test Method for Determining Ignition Sensitivity of Materials to Mechanical Impact in Ambient Liquid Oxygen and Pressurized Liquid and Gaseous Oxygen Environments
• G87 Standard Practice for Conducting Moist SO2 Tests
• G88 Standard Guide for Designing Systems for Oxygen Service
• G90 Standard Practice for Performing Accelerated Outdoor Weathering of Nonmetallic Materials Using Concentrated Natural Sunlight
• G91 Standard Practice for Monitoring Atmospheric SO2 Using the Sulfation Plate Technique
• G92 Standard Practice for Characterization of Atmospheric Test Sites
• G93 Standard Practice for Cleaning Methods and Cleanliness Levels for Material and Equipment Used in Oxygen-Enriched Environments
• G94 Standard Guide for Evaluating Metals for Oxygen Service
• G95 Standard Test Method for Cathodic Disbondment Test of Pipeline Coatings (Attached Cell Method)
• G96 Standard Guide for Online Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods)
• G97 Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications
• G98 Standard Test Method for Galling Resistance of Materials
• G99 Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
• G100 Standard Test Method for Conducting Cyclic Galvanostaircase Polarization
• G101 Standard Guide for Estimating the Atmospheric Corrosion Resistance of Low-Alloy Steels
• G102 Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements
• G103 Standard Practice for Evaluating Stress-Corrosion Cracking Resistance of Low Copper 7XXX Series Al-Zn-Mg-Cu Alloys in Boiling 6% Sodium Chloride Solution
• G105 Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests
• G106 Standard Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements
• G107 Standard Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input
• G108 Standard Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels
• G109 Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments
• G110 Standard Practice for Evaluating Intergranular Corrosion Resistance of Heat Treatable Aluminum Alloys by Immersion in Sodium Chloride + Hydrogen Peroxide Solution
• G111 Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both
• G112 Standard Guide for Conducting Exfoliation Corrosion Tests in Aluminum Alloys
• G113 Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
• G114 Standard Practices for Evaluating the Age Resistance of Polymeric Materials Used in Oxygen Service
• G115 Standard Guide for Measuring and Reporting Friction Coefficients
• G116 Standard Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion
• G117 Standard Guide for Calculating and Reporting Measures of Precision Using Data from Interlaboratory Wear or Erosion Tests
• G118 Standard Guide for Recommended Format of Wear Test Data Suitable for Databases
• G119 Standard Guide for Determining Synergism Between Wear and Corrosion
• G120 Standard Practice for Determination of Soluble Residual Contamination in by Soxhlet Extraction
• G121 Standard Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents
• G122 Standard Test Method for Evaluating the Effectiveness of Cleaning Agents
• G123 Standard Test Method for Evaluating Stress-Corrosion Cracking of Stainless Alloys with Different Nickel Content in Boiling Acidified Sodium Chloride Solution
• G124 Standard Test Method for Determining the Combustion Behavior of Metallic Materials in Oxygen-Enriched Atmospheres
• G125 Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
• G126 Standard Terminology Relating to the Compatibility and Sensitivity of Materials in Oxygen Enriched Atmospheres
• G127 Standard Guide for the Selection of Cleaning Agents for Oxygen Systems
• G128 Standard Guide for Control of Hazards and Risks in Oxygen Enriched Systems
• G129 Standard Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking
• G130 Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
• G131 Standard Practice for Cleaning of Materials and Components by Ultrasonic Techniques
• G132 Standard Test Method for Pin Abrasion Testing
• G133 Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear
• G134 Standard Test Method for Erosion of Solid Materials by a Cavitating Liquid Jet
• G135 Standard Guide for Computerized Exchange of Corrosion Data for Metals
• G136 Standard Practice for Determination of Soluble Residual Contaminants in Materials by Ultrasonic Extraction
• G137 Standard Test Method for Ranking Resistance of Plastic Materials to Sliding Wear Using a Block-On-Ring Configuration
• G138 Standard Test Method for Calibration of a Spectroradiometer Using a Standard Source of Irradiance
• G139 Standard Test Method for Determining Stress-Corrosion Cracking Resistance of Heat-Treatable Aluminum Alloy Products Using Breaking Load Method
• G140 Standard Test Method for Determining Atmospheric Chloride Deposition Rate by Wet Candle Method
• G141 Standard Guide for Addressing Variability in Exposure Testing on Nonmetallic Materials
• G142 Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both
• G143 Standard Test Method for Measurement of Web/Roller Friction Characteristics
• G144 Standard Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High Temperature Combustion Analyzer
• G145 Standard Guide for Studying Fire Incidents in Oxygen Systems
• G146 Standard Practice for Evaluation of Disbonding of Bimetallic Stainless Alloy/Steel Plate for Use in High-Pressure, High-Temperature Refinery Hydrogen Service
• G147 Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests
• G148 Standard Practice for Evaluation of Hydrogen Uptake, Permeation, and Transport in Metals by an Electrochemical Technique
• G150 Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels
• G151 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
• G152 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
• G153 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
• G154 Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
• G155 Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
• G156 Standard Practice for Selecting and Characterizing Weathering Reference Materials Used to Monitor Consistency of Conditions in an Exposure Test
• G157 Standard Guide for Evaluating the Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant Alloys for the Chemical Process Industries
• G158 Standard Guide for Three Methods of Assessing Buried Steel Tanks
• G160 Standard Practice for Evaluating Microbial Susceptibility of Nonmetallic Materials by Laboratory Soil Burial
• G161 Standard Guide for Corrosion-Related Failure Analysis
• G162 Standard Practice for Conducting and Evaluating Laboratory Corrosions Tests in Soils
• G163 Standard Guide for Digital Data Acquisition in Wear and Friction Measurements
• G164 Standard Test Method for Determination of Surface Lubrication on Flexible Webs
• G165 Standard Practice for Determining Rail-to-Earth Resistance
• G166 Standard Guide for Statistical Analysis of Service Life Data
• G167 Standard Test Method for Calibration of a Pyranometer Using a Pyrheliometer
• G168 Standard Practice for Making and Using Precracked Double Beam Stress Corrosion Specimens
• G169 Standard Guide for Application of Basic Statistical Methods to Weathering Tests
• G170 Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory
• G171 Standard Test Method for Scratch Hardness of Materials Using a Diamond Stylus
• G172 Standard Guide for Statistical Analysis of Accelerated Service Life Data
• G173 Standard Tables for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37° Tilted Surface
• G174 Standard Test Method for Measuring Abrasion Resistance of Materials by Abrasive Loop Contact
• G175 Standard Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Regulators Used for Medical and Emergency Applications
• G176 Standard Test Method for Ranking Resistance of Plastics to Sliding Wear using Block-on-Ring Wear Test—Cumulative Wear Method
• G177 Standard Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37° Tilted Surface
• G178 Standard Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic Technique
• G179 Standard Specification for Metal Black Panel and White Panel Temperature Devices for Natural Weathering Tests
• G180 Standard Test Method for Initial Screening of Corrosion Inhibiting Admixtures for Steel in Concrete
• G181 Standard Practice for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions
• G182 Standard Test Method for Determination of the Breakaway Friction Characteristics of Rolling Element Bearings
• G183 Standard Practice for Field Use of Pyranometers, Pyrheliometers and UV Radiometers
• G184 Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using Rotating Cage
• G185 Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode
• G186 Standard Test Method for Determining Whether Gas-Leak-Detector Fluid Solutions Can Cause Stress Corrosion Cracking of Brass Alloys
• G187 Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
• G188 Standard Specification for Leak Detector Solutions Intended for Use on Brasses and Other Copper Alloys
• G189 Standard Guide for Laboratory Simulation of Corrosion Under Insulation
• G190 Standard Guide for Developing and Selecting Wear Tests
• G192 Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique
• G194 Standard Test Method for Measuring Rolling Friction Characteristics of a Spherical Shape on a Flat Horizontal Plane
• G195 Standard Guide for Conducting Wear Tests Using a Rotary Platform, Double-Head Abraser
• G196 Standard Test Method for Galling Resistance of Material Couples
• G197 Standard Table for Reference Solar Spectral Distributions: Direct and Diffuse on 20° Tilted and Vertical Surfaces
• G199 Standard Guide for Electrochemical Noise Measurement

See also

• International Classification for Standards
• List of ISO standards
• List of EN standards
• List of IEC standards

References

1. "Structural Bolting Specification Change", GlaserBolt, Retrieved March 11, 2016
2. http://www.astm.org/Standard/alpha-lists/E.html
3. ASTM.org - F568M

External links

• ASTM Standards site
• List of A ASTM standards
• List of B ASTM standards
• List of C ASTM standards
• List of D ASTM standards
• List of E ASTM standards
• List of F ASTM standards
• List of G ASTM standards