Metal lace

Early bobbin lace in gold and silver thread, c. 1570.

Metal lace describes a type of lace made from metal or metallic threads, such as gold, silver, or copper. The designs can be worked on a textile ground, or the lace can completely be made from metallic threads. It is mainly used as an embellishment for military uniforms, fashionable, ceremonial and theatrical dress, and ecclesiastical textiles.[1]

Gold lace

Lace made using gold wire has been produced since antiquity, with examples of gold netting found in Egyptian and Assyrian tombs from 1500-1000 BCE.[1] It was mainly produced as an embellishment for religious vestments and high status garments.[1] Metal lace, including gold and silver point de Venise, was produced in Italy until the 15th century, when high taxation and sumptuary laws led to textile threads such as linen replacing the use of metal.[1] To avoid these costs, the production of metal lace moved to France, where a high demand by royalty and the French aristocracy led to Arras, Aurillac and other locations becoming renowned for gold lace production.[1] From the 15th century on, most metal lace was a combination of metal and textile threads, rather than made of pure metal.[1]

Orris is another term for gold or silver lace, used especially in the 18th century; the term derived from Arras lace, made in Arras, France.[2]

Gold lace and braiding was a popular option for military uniforms because it resisted tarnish, unlike other metal laces.[3]

Contemporary gold lace usually has a high silver percentage, which can be as high as 90%, with the actual gold content as low as 3%.[1] Much modern gold (and other metal) lace is now manufactured in India.[1] Modern Indian "pure gold lace" is technically made from silver that has been electroplated with gold.[4]

Copper lace

Lace made from copper wire was widely used in Elizabethan era theatre costuming as a substitute for more expensive gold and silver laces.[5][6] It was a major import, with several tons of copper thread being imported into England between 1594-1596, and at the turn of the 16th and 17th centuries, cost between 9 and 16 pennies an ounce.[6] It had a tendency to tarnish, and was less hard-wearing.[6]

Other metals

A type of die stamped metal "lace" was produced in the 19th and 20th century as a trimming for coffins.[7] Coffin lace became a major industry in Birmingham, where its manufacture in the 1860s could use up to 70 tons of tin per year.[8]

References

  1. 1 2 3 4 5 6 7 8 Venable, Shannon L. (2011). Gold : a cultural encyclopedia. Santa Barbara, Calif.: ABC-CLIO. pp. 195–196. ISBN 9780313384301.
  2. ↑ Brooks Picken, Mary (2013). A Dictionary of Costume and Fashion: Historic and Modern. Courier Corporation. p. 202. ISBN 9780486141602.
  3. ↑ McChristian, Douglas C. (2007). Uniforms, arms, and equipment : the U.S. Army on the Western Frontier, 1880-1892. Norman, OK.: University of Oklahoma. p. 189. ISBN 9780806137896.
  4. ↑ Naik, Shailaja D. (1996). Traditional embroideries of India. New Delhi: A.P.H. Pub. Corp. p. 144. ISBN 9788170247319.
  5. ↑ Jones, Ann Rosalind; Stallybrass, Peter (2000). Renaissance clothing and the materials of memory (4. print. ed.). Cambridge, England: Cambridge University Press. p. 191. ISBN 9780521786638.
  6. 1 2 3 MacIntyre, Jean (1992). Costumes and scripts in the Elizabethan theatres (1. publ. ed.). Edmonton: Univ. of Alberta Press. pp. 93–96. ISBN 9780888642264.
  7. ↑ "Coffin lace". Search the Collections. Victoria and Albert Museum. Retrieved 28 September 2014.
  8. ↑ Page, William; Salzman, Louis Francis (1908). Doubleday, Herbert Arthur, ed. The Victoria History of the County of Warwick: Warwickshire. A. Constable. From 60 to 70 tons of block tin were consumed annually in Birmingham in 1866 in the manufacture of coffin-lace
This article is issued from Wikipedia - version of the 11/6/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.