Midland Railway 1000 Class

Midland Railway 1000 Class

1025 in photographic grey livery
Type and origin
Power type Steam
Designer Samuel Waite Johnson: renewed as superheated Deeley compound by Henry Fowler
Builder Derby Works
Build date 1902–1909
Total produced 45
Rebuild date 1913–1928
Specifications
Configuration 4-4-0
UIC class 2′B h3v
Gauge 4 ft 8 12 in (1,435 mm) standard gauge
Leading dia. 3 ft 6 12 in (1.080 m)
Driver dia. 7 ft 0 in (2.134 m)
Fuel type Coal
Water cap 3,500 imp gal (16,000 l; 4,200 US gal)
Boiler 2631–2635 and 1000–1004: G8½
Remainder: G9
All rebuilt with G9AS
Boiler pressure 220 psi (1.52 MPa)
Cylinders Three, one inside high-pressure, two outside low-pressure
High-pressure cylinder 19 in × 26 in (483 mm × 660 mm)
Low-pressure cylinder 21 in × 26 in (533 mm × 660 mm)
Valve gear Stephenson
Valve type HP: piston valve,
LP: slide valves
Performance figures
Tractive effort 21,840 lbf (97.1 kN)
Career
Operators MRLMSBR
Class 1000
Power class 4P
Withdrawn 1948–1953
Disposition One preserved, remainder scrapped

Midland Railway 1000 Class is a class of 4-4-0 steam locomotive designed for passenger work.

Overview

These were developed from a series of five locomotives (2631–2635), introduced in 1902 by Samuel W. Johnson, which had had a 3-cylinder compound arrangement on the Smith system. This had a layout of one high-pressure cylinder inside the frames, and two low-pressure cylinders outside, and utilised Smith's starting arrangement. On the first two locomotives, independent control of high-pressure and low-pressure valve gears was available. From 1905 onwards, Johnson's successor Richard Deeley built an enlarged and simplified version, eliminating all the Smith refinements whilst fitting his own starting arrangement, making the engines simpler to drive. These locomotives were originally numbered 1000–1029, but in the 1907 renumbering scheme the five Smith/Johnson locomotives became 1000–1004 and the Deeley compounds 1005–1034, ten more of these being added in 1908–1909. The original Johnson locomotives were all subsequently renewed as Deeley compounds, including the now-preserved 1000 which was rebuilt and outshopped with a superheater in 1914.

Numbered 1000–1044 by both the Midland and LMS companies, British Railways renumbered the Midland series of compounds 41000–41044 after nationalisation in 1948.

Number 1000 at Derby Works shortly after preservation

Accidents and incidents

Preservation

No. 1000 was set aside for preservation after withdrawal and restored in 1959 close to its 1914 condition, painted in Midland maroon livery, running enthusiasts' specials until placed in the temporary Clapham Transport museum. Though steamed since preservation, it is currently a static exhibit at the Barrow Hill Engine Shed at Derbyshire, having been lent by the National Railway Museum in York.

For terminology, see Steam locomotive components

LMS compound locomotives

After the grouping, the LMS continued to build slightly modified MR Compounds as the LMS Compound 4-4-0

Other compound locomotives with the same 3-cylinder layout

References

  1. Hall, Stanley (1990). The Railway Detectives. London: Ian Allan. p. 66. ISBN 0 7110 1929 0.
  2. Earnshaw, Alan (1991). Trains in Trouble: Vol. 7. Penryn: Atlantic Books. p. 23. ISBN 0-906899-50-8.
  3. Hoole, Ken (1983). Trains in Trouble: Vol. 4. Redruth: Atlantic Books. p. 25. ISBN 0 906899 07 9.
  4. Earnshaw, Alan (1990). Trains in Trouble: Vol. 6. Penryn: Atlantic Books. p. 30. ISBN 0-906899-37-0.
  5. Atlas Lokomotiv Praha 1970
Sources
Wikimedia Commons has media related to Midland Railway 1000 Class.
This article is issued from Wikipedia - version of the 11/26/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.