Modified Allan variance

The modified Allan variance (MVAR),[1] also known as mod σy2(τ), is a variable bandwidth modified variant of Allan variance, a measurement of frequency stability in clocks, oscillators and amplifiers. Its main advantage relative to Allan variance is its ability to separate white phase noise from flicker phase noise.

The modified Allan deviation (MDEV),[1] also known as mod σy(τ), is the deviation variant of the modified Allan variance.

Background

The Allan variance has a drawback in that it is unable to separate the white phase modulation (WPM) from the flicker phase modulation (FPM). Looking at their response to Power-law noise it is clearly seen that WPM and FPM have almost the same response to tau, but WPM is linearly sensitive to the system bandwidth fH whereas FPM is only weakly dependent on it. Thus, by varying the system bandwidth the WPM and FPM noise forms may be separated. However, it is impractical to alter the hardware of the measurement system. By post-processing the sample-series and implementing a software bandwidth a modified Allan variance measure can be given capable of resolving the noise forms.

Definition

The modified Allan variance is defined for [2] using time error samples as

or with average fractional frequency time series and τ = nτ0

where n is the integer number of samples averaged over.

Estimators

The modified Allan variance estimator for time error time series is

or with average fractional frequency time series

References

  1. 1 2 NIST SP 1065: Handbook of Frequency Stability Analysis
  2. David W. Allan and James A. Barnes: A modified "Allan variance" with increased oscillator characterization ability, 35th Annual Frequency Control Symposium, 1981
This article is issued from Wikipedia - version of the 6/28/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.