OR gate

This article is about OR in the sense of an electronic logic gate (e.g. CMOS 4071). For OR in the purely logical sense, see Logical disjunction.

INPUT		OUTPUT
A	B	A OR B
0	0	0
0	1	1
1	0	1
1	1	1

The OR gate is a digital logic gate that implements logical disjunction - it behaves according to the truth table to the right. A HIGH output (1) results if one or both the inputs to the gate are HIGH (1). If neither input is high, a LOW output (0) results. In another sense, the function of OR effectively finds the maximum between two binary digits, just as the complementary AND function finds the minimum.^[1]

Symbols

There are two symbols of OR gates: the American (ANSI or 'military') symbol and the IEC ('European' or 'rectangular') symbol, as well as the deprecated DIN symbol.^[2]^[3] For more information see Logic Gate Symbols.


MIL/ANSI Symbol	IEC Symbol	DIN Symbol

This schematic diagram shows the arrangement of four OR gates within a standard 4071 CMOS integrated circuit.

Hardware description and pinout

OR Gates are basic logic gates, and as such they are available in TTL and CMOS ICs logic families. The standard 4000 series CMOS IC is the 4071, which includes four independent two-input OR gates. The ancestral TTL device is the 7432. There are many offshoots of the original 7432 OR gate, all having the same pinout but different internal architecture, allowing them to operate in different voltage ranges and/or at higher speeds. In addition to the standard 2-Input OR Gate, 3- and 4-Input OR Gates are also available. In the CMOS series, these are:

4075: Triple 3-Input OR Gate
4072: Dual 4-Input OR Gate

Variations include:

74LS32: Quad 2-input OR gate (low power Schottky version)
74HC32: Quad 2-input OR gate (high speed CMOS version) - has lower current consumption/wider voltage range
74AC32: Quad 2-input OR gate (advanced CMOS version) - similar to 74HC32, but with significantly faster switching speeds and stronger drive
74LVC32: Low voltage CMOS version of the same.

Implementations

CMOS OR gate

NMOS OR gate

BJT OR gate

OR gate using diodes

Alternatives

If no specific OR gates are available, one can be made from NAND or NOR gates in the configuration shown in the image below. Any logic gate can be made from a combination of NAND or NOR gates.

NAND Construction	NOR construction

Wired-OR

Wired OR gate using open-collector NOR gates

With active low open collector logic outputs, as used for control signals in many circuits, an OR function can be produced by wiring together several outputs. This arrangement is called a wired OR. This implementation of an OR function typically is also found in integrated circuits of N or P-type only transistor processes.

References

↑ "OR Gate". Hyperphysics.phy-astr.gsu.edu. Retrieved 2012-09-24.
↑ Harris, David Harris, Sarah (2007). Digital design and computer architecture (1st ed.). San Francisco,Calif.: Morgan Kaufmann. p. 21. ISBN 9780123704979.
↑ Brumbach, Michael E. Industrial electricity (8th ed.). Clifton Park, N.Y.: Delmar. p. 546. ISBN 9781435483743.

Logical connectives

Tautology $\top$

NAND $\uparrow$ Converse implication $\leftarrow$ Implication $\rightarrow$ OR $\lor$

Negation $\neg$ XOR $\oplus$ Biconditional $\leftrightarrow$ Statement

NOR $\downarrow$ Nonimplication $\nrightarrow$ Converse nonimplication $\nleftarrow$ AND $\land$

Contradiction $\bot$

This article is issued from Wikipedia - version of the 10/6/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.