Polishing

For other uses, see Polish (disambiguation).

Polishing is the process of creating a smooth and shiny surface by rubbing it or using a chemical action, leaving a surface with a significant specular reflection (still limited by the index of refraction of the material according to the Fresnel equations.)[1] In some materials (such as metals, glasses, black or transparent stones) polishing is also able to reduce diffuse reflection to minimal values. When an unpolished surface is magnified thousands of times, it usually looks like mountains and valleys. By repeated abrasion, those "mountains" are worn down until they are flat or just small "hills." The process of polishing with abrasives starts with coarse ones and graduates to fine ones.

Mechanical properties

The strength of polished products is normally higher than their rougher counterpart owing to the removal of stress concentrations present in the rough surface. They take the form of corners and other defects which magnify the local stress beyond the inherent strength of the material.

Polishing with very fine abrasive differs physically from coarser abrasion, in that material is removed on a molecular level, so that the rate is correlated to the boiling point rather than to the melting point of the material being polished.

Types

Metalworking

Other polishing processes include:

Woodworking

Other

References

  1. Polish, retrieved 2008-01-04.
Wikimedia Commons has media related to Polishing.
Look up polishing in Wiktionary, the free dictionary.
This article is issued from Wikipedia - version of the 10/13/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.