Port (computer networking)

This article is about software communication ports. For physical ports, see Computer port (hardware).

In the internet protocol suite, a port is an endpoint of communication in an operating system. While the term is also used for hardware devices, in software it is a logical construct that identifies a specific process or a type of network service.

A port is always associated with an IP address of a host and the protocol type of the communication, and thus completes the destination or origination address of a communication session. A port is identified for each address and protocol by a 16-bit number, commonly known as the port number.

Specific port numbers are often used to identify specific services. Of the thousands of enumerated ports, 1024 well-known port numbers are reserved by convention to identify specific service types on a host. In the client–server model of application architecture, the ports that network clients connect to for service initiation provide a multiplexing service. After initial communication binds to the well-known port number, this port is freed by switching each instance of service requests to a dedicated, connection-specific port number, so that additional clients can be serviced. The protocols that primarily use ports are the transport layer protocols, such as the Transmission Control Protocol (TCP) and the User Datagram Protocol (UDP).

Ports were unnecessary on direct point-to-point links when the computers at each end could only run one program at a time. Ports became necessary after computers became capable of executing more than one program at a time and were connected to modern packet-switched networks.

Details

Transport layer protocols, such as the Transmission Control Protocol (TCP) and the User Datagram Protocol (UDP), specify a source and destination port number in their headers. A port number is a 16-bit unsigned integer, thus ranging from 0 to 65535.[lower-alpha 1] A process associates its input or output channels, via an Internet socket (a type of file descriptor), with a transport protocol, a port number, and an IP address. This process is known as binding, and enables sending and receiving data via the network. The operating system's networking software has the task of transmitting outgoing data from all application ports onto the network, and forwarding arriving network packets to processes by matching the packet's IP address and port number. Only one process may bind to a specific IP address and port combination using the same transport protocol. Common application failures, sometimes called port conflicts, occur when multiple programs attempt to bind to the same port numbers on the same IP address using the same protocol.

Applications implementing common services often use specifically reserved well-known port numbers for receiving service requests from clients. This process is known as listening, and involves the receipt of a request on the well-known port and establishing a one-to-one server-client dialog, using the same local port number. Other clients may continue to connect to the listening port; this works because a TCP connection is identified by a tuple consisting of the local address, the local port, the remote address, and the remote port.[1] The well-known ports are defined by convention overseen by the Internet Assigned Numbers Authority (IANA). The core network services, such as the World-Wide Web, typically use well-known port numbers. In many operating systems special privileges are required for applications to bind to these ports, because these are often deemed critical to the operation of IP networks. Conversely, the client end of a connection typically uses a high port number allocated for short term use, therefore called an ephemeral port.

The port numbers are encoded in the transport protocol packet header, and they can be readily interpreted not only by the sending and receiving computers, but also by other components of the networking infrastructure. In particular, firewalls are commonly configured to differentiate between packets based on their source or destination port numbers. Port forwarding is an example application of this.

The practice of attempting to connect to a range of ports in sequence on a single computer is commonly known as port scanning. This is usually associated either with malicious cracking attempts or with network administrators looking for possible vulnerabilities to help prevent such attacks. Port connection attempts are frequently monitored and logged by computers. The technique of port knocking uses a series of port connections (knocks) from a client computer to enable a server connection.

Examples

An example for the use of ports is the Internet mail system. A server used for sending and receiving email generally needs two services. The first service is used to transport email to and from other servers. This is accomplished with the Simple Mail Transfer Protocol (SMTP). The SMTP service application usually listens on TCP port 25 for incoming requests. The second service is usually either the Post Office Protocol (POP) or the Internet Message Access Protocol (IMAP) which is used by e-mail client applications on users' personal computers to fetch email messages from the server. The POP service listens on TCP port number 110. Both services may be running on the same host computer, in which case the port number distinguishes the service that was requested by a remote computer, be it a user's computer or another mail server.

While the listening port number of a server is well defined (IANA calls these the well-known ports), the client's port number is often chosen from the dynamic port range (see below). In some applications, the clients and the server each use specific port numbers assigned by the IANA. A good example of this is DHCP in which the client always uses UDP port 68 and the server always uses UDP port 67.

Use in URLs

Port numbers are sometimes seen in web or other uniform resource locators (URLs). By default, HTTP uses port 80 and HTTPS uses port 443, but a URL like http://www.example.com:8080/path/ specifies that the web browser connects instead to port 8080 of the HTTP server.

Common port numbers

The Internet Assigned Numbers Authority (IANA) is responsible for the global coordination of the DNS Root, IP addressing, and other Internet protocol resources. This includes the registration of commonly used port numbers for well-known Internet services.

The port numbers are divided into three ranges: the well-known ports, the registered ports, and the dynamic or private ports.

The well-known ports (also known as system ports) are those from 0 through 1023. The requirements for new assignments in this range are stricter than for other registrations.[2]

Examples include:

The registered ports are those from 1024 through 49151. IANA maintains the official list of well-known and registered ranges.[3] The dynamic or private ports are those from 49152 through 65535. One common use for this range is for ephemeral ports.

History

The concept of port numbers was established by the early developers of the ARPANET in informal co-operation of software authors and system administrators.

The term port number was not yet used at this time. It was preceded by the use of the term socket number in the early development stages of the network. A socket number for a remote host was a 40-bit quantity.[4] The first 32 bits were similar to today's IPv4 address, but at the time the most-significant 8 bits were the host number. The least-significant portion of the socket number (bits 33 through 40) was an entity called Another Eightbit Number, abbreviated AEN,[5] today's port number.

On March 26, 1972, Vint Cerf and Jon Postel called for documenting the then current usages and establishing a socket number catalog in RFC 322. Network administrators were asked to submit a note or place a phone call, "describing the function and socket numbers of network service programs at each HOST".[6]

This catalog was subsequently published as RFC 433 in December 1972 and included a list of hosts and their port numbers and the corresponding function used at each host in the network. This first registry function served primarily as documentation of usage and indicated that port number usage was conflicting between some hosts for "useful public services".[5]

The document promised a resolution of the conflicts based on a standard that Postel had published in May 1972 in RFC 349, in which he first proposed official assignments of port numbers to network services and suggested a dedicated administrative function, which he called a czar, to maintain a registry.[7]

The 256 values of the AEN were divided into the following ranges:

The Telnet service received the first official assignment of the value 1. In detail, the first set of assignments was:[7]

1  Telnet
3  File transfer
5  Remote job entry
7  Echo
9  Discard

In the early ARPANET, the AEN was also called a socket name,[8] and was used with the Initial Connection Protocol (ICP), a component of the Network Control Program (NCP)[9][10] NCP was the forerunner of the modern Internet protocols. Today the terminology service name is still closely connected with port numbers, the former being text strings used in some network functions to represent a numerical port number.

Notes

  1. For TCP, port number 0 is reserved and cannot be used. For UDP, the source port is optional and a value of zero means no port.

References

  1. Postel, John. "RFC 793". Retrieved 29 June 2012.
  2. Michelle Cotton; Lars Eggert et al. (August 2011). Internet Assigned Numbers Authority (IANA) Procedures for the Management of the Service Name and Transport Protocol Port Number Registry. IETF. BCP 165. RFC 6335. https://tools.ietf.org/html/rfc6335. Retrieved April 2014.
  3. "Port Numbers". Internet Assigned Numbers Authority (IANA).
  4. RFC 36, Protocol Notes, S. Crocker (16 March 1970)
  5. 1 2 RFC 433, Socket number list, J. Postel, N. Neigus (22 December 1972)
  6. RFC 322, Well Known Socket Numbers, V. Cerf, J. Postel (26 March 1972)
  7. 1 2 RFC 349, Proposed Standard Socket Numbers J. Postel (30 May 1972)
  8. RFC 197, Initial Connection Protocol--Reviewed, A. Shoshani, E. Harslem (14 July 1971)
  9. NIC 7104, ARPANET Protocol Handbook
  10. Postel, Jon; Feinler, E. (1978). ARPANET Protocol Handbook. Menlo Park, CA: Network Information Center.
This article is issued from Wikipedia - version of the 10/23/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.