Portable cord

Electrical extension cords are typically made using portable cord rated for the task

A portable cord (also known as portable cordage, flexible cord, or extension cord) is a cable with multiple conductors used for temporary electrical power connections requiring flexibility. The cord can be employed in a range of applications, such as operating motors in small and large tools, equipment, power extensions, home appliances, and machinery.

Description

Portable cords may be used in commercial, industrial and residential applications. Some are used on job sites where resistance to oil, chemicals, and abrasion is essential in extreme environments - both the heat and the cold, outside or inside. Additionally, some portable cords can be water-resistant or water-submersible. Portable cords are commonly used in a range of facilities, such as construction sites, mills, mines, sports complexes, or even marinas.

Although the construction of a portable cord varies depending on the type, a standard cord has at least two stranded copper conductors sized between #18 and #2 American wire gauge (AWG). The copper stranding, insulation, and outer jacket directly influence the physical properties of the cord and its permitted uses.[1][2][3]

Types

A variety of portable cords, differing in styles, lengths, and thicknesses exists in the marketplace. Common types include Type SJT, SVT, SEOW, SJ, SJOW, SJOOW, SO, and SOW, each designed for specific applications.[1]

A portable cord is usually made of thermoset, thermoplastic elastomer, or thermoplastic. Thermoset cords have heavy-duty-grade rubber jackets, are extremely sturdy and oil-resistant, and may remain flexible over a temperature range of −40 to 220 °F (−40 to 104 °C).[1] Thermoplastic elastomer (TPE) cords have medium-duty thermoplastic elastomer jackets and perform well in cold conditions down to −50 °F (−46 °C).[1] Thermoplastic cords tyoically have an extruded plastic PVC jacket, and are intended for light-duty use, typically in a temperature range of −4 to 140 °F (−20 to 60 °C).[1][3]

Letter codes

Letter codes have been defined by Underwriters Labs (UL) to describe various attributes and ratings of portable cords. The Canadian Standards Association (CSA) also has defined similar letter codes, and ongoing standards harmonization should eventually resolve minor differences.[1][2]

See also

References

  1. 1 2 3 4 5 6 Cooper, Martin E.; Riggs, Linda (May 1, 2000). "Don't Let Your Portable Cord Tie You Up". EC&M: Electrical Construction & Maintenance. Penton. Retrieved 2016-03-24.
  2. 1 2 "North American Power Cords" (PDF). Qualtek USA. Qualtek Electronics Corporation. Retrieved 2016-03-24.
  3. 1 2 "Extension Cord Ratings - Definitions & Designations". Retractable-extension-cord.com. Retrieved 2016-03-24.
This article is issued from Wikipedia - version of the 3/27/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.