Dixon's Q test

In statistics, Dixon's Q test, or simply the Q test, is used for identification and rejection of outliers. This assumes normal distribution and per Robert Dean and Wilfrid Dixon, and others, this test should be used sparingly and never more than once in a data set. To apply a Q test for bad data, arrange the data in order of increasing values and calculate Q as defined:

$Q={\frac {{\text{gap}}}{{\text{range}}}}$

Where gap is the absolute difference between the outlier in question and the closest number to it. If Q > Q_table, where Q_table is a reference value corresponding to the sample size and confidence level, then reject the questionable point. Note that only one point may be rejected from a data set using a Q test.

Example

Consider the data set:

$0.189,\ 0.167,\ 0.187,\ 0.183,\ 0.186,\ 0.182,\ 0.181,\ 0.184,\ 0.181,\ 0.177\,$

Now rearrange in increasing order:

$0.167,\ 0.177,\ 0.181,\ 0.181,\ 0.182,\ 0.183,\ 0.184,\ 0.186,\ 0.187,\ 0.189\,$

We hypothesize that 0.167 is an outlier. Calculate Q:

$Q={\frac {{\text{gap}}}{{\text{range}}}}={\frac {0.177-0.167}{0.189-0.167}}=0.455.$

With 10 observations and at 90% confidence, Q = 0.455 > 0.412 = Q_table, so we conclude 0.167 is an outlier. However, at 95% confidence, Q = 0.455 < 0.466 = Q_table 0.167 is not considered an outlier. This means that for this example we can be 90% sure that 0.167 is an outlier, but we cannot be 95% sure.

McBane^[1] notes: Dixon provided related tests intended to search for more than one outlier, but they are much less frequently used than the r₁₀ or Q version that is intended to eliminate a single outlier.

Table

This table summarizes the limit values of the test.

Number of values:	3	4	5	6	7	8	9	10
Q90%:	0.941	0.765	0.642	0.560	0.507	0.468	0.437	0.412
Q95%:	0.970	0.829	0.710	0.625	0.568	0.526	0.493	0.466
Q99%:	0.994	0.926	0.821	0.740	0.680	0.634	0.598	0.568

See also

• Grubbs' test for outliers

References

1. Halpern, Arthur M. "Experimental physical chemistry : a laboratory textbook." 3rd ed. / Arthur M. Halpern , George C. McBane. New York : W. H. Freeman, c2006 Library of Congress

• Robert B. Dean and Wilfrid J. Dixon (1951) "Simplified Statistics for Small Numbers of Observations". Anal. Chem., 1951, 23 (4), 636–638. Abstract Full text PDF
• Rorabacher, D.B. (1991) "Statistical Treatment for Rejection of Deviant Values: Critical Values of Dixon Q Parameter and Related Subrange Ratios at the 95 percent Confidence Level". Anal. Chem., 63 (2), 139–146. PDF (including larger tables of limit values)
• McBane, George C. (2006) "Programs to Compute Distribution Functions and Critical Values for Extreme Value Ratios for Outlier Detection". J. Statistical Software 16(3):1–9, 2006 Article (PDF) and Software (Fortan-90, Zipfile)
• Shivanshu Shrivastava, A. Rajesh, P. K. Bora (2014) "Sliding window Dixon's tests for malicious users' suppression in a cooperative spectrum sensing system" IET Communications, 2014, 8 (7)

External links

• Test for Outliers Main page of GNU R's package 'outlier' including 'dixon.test' function.
• Dixon's test in Communications Use of Dixon's test in Cognitive Radio Communications by Shivanshu Shrivastava