Ratchet (device)
![](../I/m/Ratchet_Drawing.svg.png)
A ratchet is a mechanical device that allows continuous linear or rotary motion in only one direction while preventing motion in the opposite direction. Ratchets are widely used in machinery and tools. Though something of a misnomer, "ratchet" is also often used to refer to ratcheting socket wrenches, a common tool with a ratcheting handle.
Theory of operation
![](../I/m/Ratchet_example.gif)
A ratchet consists of a round gear (see Figure 1) or linear rack with teeth, and a pivoting, spring-loaded finger called a pawl (or click[1][2]) that engages the teeth. The teeth are uniform but asymmetrical, with each tooth having a moderate slope on one edge and a much steeper slope on the other edge.
When the teeth are moving in the unrestricted (i.e., forward) direction (see Figure 2), the pawl easily slides up and over the gently sloped edges of the teeth, with a spring forcing it (often with an audible 'click') into the depression between the teeth as it passes the tip of each tooth. When the teeth move in the opposite (backward) direction, however, the pawl will catch against the steeply sloped edge of the first tooth it encounters, thereby locking it against the tooth and preventing any further motion in that direction.
Backlash
Because the ratchet can only stop backward motion at discrete points (i.e., at tooth boundaries), a ratchet does allow a limited amount of backward motion. This backward motion—which is limited to a maximum distance equal to the spacing between the teeth—is called backlash. In cases where backlash must be minimized, a smooth, toothless ratchet with a high friction surface such as rubber is sometimes used. The pawl bears against the surface at an angle so that any backward motion will cause the pawl to jam against the surface and thus prevent any further backward motion. Since the backward travel distance is primarily a function of the compressibility of the high friction surface, this mechanism can result in significantly reduced backlash.
Uses
Ratchet mechanisms are used in a wide variety of applications, including these:
- Capstans
- Clocks
- Freewheel (overrunning clutch)
- Jacks
- Anti-rollback devices used in roller coasters
- Slacklines
- Tie down straps
- Turnstiles
- Handcuffs
Looms
Gallery
- Ratcheting socket wrench or spanner.
- A ratchet lever hoist.
- The ratchet mechanism of a cable tie.
See also
References
![]() |
Wikimedia Commons has media related to Ratchets. |
- ↑ http://www.hautehorlogerie.org/en/encyclopaedia/glossary-of-watchmaking/s/pawl-click/
- ↑ "Know your terminology – Clocks". Hints and Tips. British Horological Institute. Retrieved 2008-05-15.