Rolls-Royce Thrust Measuring Rig

"Flying bedstead" redirects here. For the NASA lunar landing training simulator, see Lunar Landing Research Vehicle.
Thrust Measuring Rig
On display in the Science Museum
Role Experimental vertical take-off
National origin United Kingdom
Manufacturer Rolls-Royce
First flight 3 August 1954 (free)
Number built 2


The Rolls-Royce Thrust Measuring Rig (TMR) was a pioneering vertical take-off and landing aircraft developed by Rolls-Royce in the 1950s. The TMR used two Nene turbojet engines mounted back-to-back horizontally within a steel framework, raised upon four legs with castors for wheels. The TMR had no lifting surfaces (wings, blades, etc.) and was understandably nicknamed the Flying Bedstead.

Design and development

The man largely responsible for the development of the TMR was Dr Alan Arnold Griffith, who had worked on gas turbine design at the Royal Aircraft Establishment (RAE), in the 1920s and was a pioneer of jet lift technology. Griffith was employed by Rolls-Royce in 1939.[1]

Two Thrust Measuring Rigs were built with the first taking to the air on 3 July 1953 at Hucknall Aerodrome, Nottinghamshire, England, though it remained tethered to the ground while airborne. The first free flight by the TMR was made on 3 August 1954 with R.T. Shepherd, Rolls-Royce's chief test pilot, at the controls. The TMR had only marginal excess power and flying was tricky due to this, combined with the slow throttle response of the engines, and a considerable degree of anticipation in the use of engine power was required in order to prevent overshooting of desired altitude, and to ensure a gentle touchdown when landing. The aircraft survived a failure of its thrust-vectored control system on September 16, 1957 1957 whilst piloted by Wing Commander Stan Hubbard of RAE.[2] The second Thrust Measuring Rig (Serial XK426) was destroyed on 29 November 1957 killing Wing Commander H. G. F. Larsen who was piloting the machine for the first time.[3]

As the TMR possessed no inherent stability, it incorporated an automatic stabiliser system. The output of the jets was directed towards the centre of the rig with one jetpipe discharging downwards through a central nozzle while the other jet discharged downwards through two smaller nozzles on either side. Four outrigger arms extended out from the rig, one on either side and one each at the front and rear, through which compressed air was released for control in roll, pitch and yaw when in flight. The purpose of the rig was, as the name suggests, to test turbojet engines for lifting purposes and to develop techniques for controlling such an aircraft.

Following successful trials of the TMR, Rolls-Royce began development of the Rolls-Royce RB.108 direct-lift turbojet, five of which were used to power the first true British VTOL aircraft, the Short SC.1.

Aircraft on display

The first machine (Serial XJ314) is preserved and on public display at the Science Museum in London, England.

Specifications (Thrust Measuring Rig)

General characteristics

Performance

See also

Comparable aircraft

References

  1. Flying the Bedstead – Part 2. – Aeroplane Monthly. April 1985.
  2. "Wing Commander Stan Hubbard - obituary". Daily Telegraph. 1 January 2015. Retrieved 2 January 2015.
  3. "On This Day November 29, 1957". The Times. 29 November 2007. Retrieved 2 January 2015.
This article is issued from Wikipedia - version of the 11/30/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.