SAE 310S stainless steel

SAE 310S Stainless Steel is the low carbon version of 310 and is suggested for applications where sensitisation, and subsequent corrosion by high temperature gases or condensates during shutdown may pose a problem.

SAE 310 Stainless Steel is a highly alloyed austenitic stainless steel used for high temperature application. The high chromium and nickel content give the steel excellent oxidation resistance as well as high strength at high temperature. This grade is also very ductile, and has good weldability enabling its widespread usage in many applications. Typical Applications

310/310S find wide application in all high-temperature environments where scaling and corrosion resistance, as well as high temperature strength and good creep resistance are required.

Chemical Composition

SAE C Mn P S Si Cr Ni
310 0.24 max 2.0 max 0.045max 0.030 max 1.5max 24.0-26.0 19.0-22.0
310S 0.08max 2.0 max 0.045 max 0.030 max 1.5 max 24.0 - 26.0 19.0 - 22.0

Source: [1]

References

  1. "310 310S Stainless Steel". TubingChina.com Stainless Steel Directory.


This article is issued from Wikipedia - version of the 11/27/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.