Schreder HP-20

HP-20
Role Glider
National origin United States
Designer Richard Schreder
First flight 1981
Introduction 1981
Number built one


The Schreder HP-20 is an American, high-wing, T-tail, single seat glider designed by Richard Schreder.[1]

Design and development

The HP-20 was designed by Schreder for the FAI 15 Metre Class. The HP-20 prototype was just complete when Schreder lost interest in the project and moved on to work on the HP-21 instead. The sole example of the HP-20 was built by Schreder in his workshop in Byran, Ohio and first flew in 1981.[1][2]

The HP-20 is all-metal with foam wing ribs. The design shares a similar fuselage to the HP-19, but has a different double-tapered wing of smaller area, 102 sq ft (9.5 m2) versus 113 sq ft (10.5 m2) for the HP-19. This gives the HP-20 a higher wing loading and higher best glide speed, although the glide ratio is the same as the HP-19 at 42:1. The airfoil is a Schreder modification of a Wortmann section, designated as Schreder 3. 200 lb (91 kg) of water ballast can be carried. The landing gear is a retractable monowheel.[1]

Operational history

Even though Richard Schreder died in August 2002, in April 2011 the sole HP-20 was still registered to him.[2]

Specifications (HP-20)

Data from Soaring[1]

General characteristics

Performance

See also


References

  1. 1 2 3 4 Said, Bob: 1983 Sailplane Directory, Soaring Magazine, page 24. Soaring Society of America, November 1983. USPS 499-920
  2. 1 2 Federal Aviation Administration (April 2011). "Make / Model Inquiry Results". Retrieved 19 April 2011.
This article is issued from Wikipedia - version of the 9/30/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.