Cocktail shaker sort

Cocktail shaker sort

Class	Sorting algorithm
Data structure	Array
Worst-case performance	$O(n^{2})$
Best-case performance	$O(n)$
Average performance	$O(n^{2})$
Worst-case space complexity	$O(1)$

Cocktail shaker sort,^[1] also known as bidirectional bubble sort,^[2] cocktail sort, martini sort, shaker sort (which can also refer to a variant of selection sort), ripple sort, shuffle sort,^[3] or shuttle sort, is a variation of bubble sort that is both a stable sorting algorithm and a comparison sort. The algorithm differs from a bubble sort in that it sorts in both directions on each pass through the list. This sorting algorithm is only marginally more difficult to implement than a bubble sort, and solves the problem of turtles in bubble sorts. It provides only marginal performance improvements, and does not improve asymptotic performance; like the bubble sort, it is not of practical interest (insertion sort is preferred for simple sorts), though it finds some use in education.

Pseudocode

The simplest form goes through the whole list each time:

procedure cocktailShakerSort( A : list of sortable items ) defined as:
  do
    swapped := false
    for each i in 0 to length( A ) - 2 do:
      if A[ i ] > A[ i + 1 ] then // test whether the two elements are in the wrong order
        swap( A[ i ], A[ i + 1 ] ) // let the two elements change places
        swapped := true
      end if
    end for
    if not swapped then
      // we can exit the outer loop here if no swaps occurred.
      break do-while loop
    end if
    swapped := false
    for each i in length( A ) - 2 to 0 do:
      if A[ i ] > A[ i + 1 ] then
        swap( A[ i ], A[ i + 1 ] )
        swapped := true
      end if
    end for
  while swapped // if no elements have been swapped, then the list is sorted
end procedure

The first rightward pass will shift the largest element to its correct place at the end, and the following leftward pass will shift the smallest element to its correct place at the beginning. The second complete pass will shift the second largest and second smallest elements to their correct places, and so on. After i passes, the first i and the last i elements in the list are in their correct positions, and do not need to be checked. By shortening the part of the list that is sorted each time, the number of operations can be halved (see bubble sort).

This is an example of the algorithm in MATLAB/OCTAVE with the optimization of remembering the last swap index and updating the bounds.

function A = cocktailShakerSort(A)
% `beginIdx` and `endIdx` marks the first and last index to check
beginIdx = 1;
endIdx = length(A)-1;
while beginIdx <= endIdx
    newBeginIdx = endIdx;
    newEndIdx = beginIdx;
    for ii= beginIdx:endIdx
        if A(ii) > A(ii + 1)
            [A(ii+1), A(ii)] = deal(A(ii), A(ii+1));
            swapped = true;
			newEndIdx=ii;
        end

    end
    if swapped != false    % if swapped equals to false, then the list is already been sorted
        break;
    end
    % decreases `endIdx` because the elements after `newEndIdx` are in correct order
    endIdx = newEndIdx - 1;
    swapped = true;
    for ii= endIdx:-1:beginIdx
        if A(ii) > A(ii + 1)
            [A(ii+1), A(ii)] = deal(A(ii), A(ii+1));
            newBeginIdx = ii;
            swapped = true;
        end
    end
    if swapped != false          % After finishing the above code, the list is being sorted
        break;
    end
    % increases `beginIdx` because the elements before `newBeginIdx` are in correct order
    beginIdx = newBeginIdx + 1;
end
end

Differences from bubble sort

Cocktail shaker sort is a slight variation of bubble sort.^[1] It differs in that instead of repeatedly passing through the list from bottom to top, it passes alternately from bottom to top and then from top to bottom. It can achieve slightly better performance than a standard bubble sort. The reason for this is that bubble sort only passes through the list in one direction and therefore can only move items backward one step each iteration.

An example of a list that proves this point is the list (2,3,4,5,1), which would only need to go through one pass of cocktail sort to become sorted, but if using an ascending bubble sort would take four passes. However one cocktail sort pass should be counted as two bubble sort passes. Typically cocktail sort is less than two times faster than bubble sort.

Another optimization can be that the algorithm remembers where the last actual swap has been done. In the next iteration, there will be no swaps beyond this limit and the algorithm has shorter passes. As the cocktail shaker sort goes bidirectionally, the range of possible swaps, which is the range to be tested, will reduce per pass, thus reducing the overall running time slightly.

Complexity

The complexity of the cocktail shaker sort in big O notation is $O(n^{2})$ for both the worst case and the average case, but it becomes closer to $O(n)$ if the list is mostly ordered before applying the sorting algorithm. For example, if every element is at a position that differs by at most k (k ≥ 1) from the position it is going to end up in, the complexity of cocktail shaker sort becomes $O(kn).$

The cocktail shaker sort is also briefly discussed in the book The Art of Computer Programming, along with similar refinements of bubble sort. In conclusion, Knuth states about bubble sort and its improvements:

But none of these refinements leads to an algorithm better than straight insertion [that is, insertion sort]; and we already know that straight insertion isn't suitable for large N. [...] In short, the bubble sort seems to have nothing to recommend it, except a catchy name and the fact that it leads to some interesting theoretical problems.
— D. E. Knuth^[1]

References

1 2 3 Knuth, Donald E. (1973). "Sorting by Exchanging". Art of Computer Programming. 3. Sorting and Searching (1st ed.). Addison-Wesley. pp. 110–111. ISBN 0-201-03803-X.
↑ Black, Paul E.; Bockholt, Bob (24 August 2009). "bidirectional bubble sort". In Black, Paul E. Dictionary of Algorithms and Data Structures. National Institute of Standards and Technology. Retrieved 5 February 2010.
↑ Duhl, Martin (1986). "Die schrittweise Entwicklung und Beschreibung einer Shuffle-Sort-Array Schaltung". HYPERKARL aus der Algorithmischen Darstellung des BUBBLE-SORT-ALGORITHMUS. Projektarbeit (in German). Technical University of Kaiserslautern.

Sources

Hartenstein, R. (July 2010). "A new World Model of Computing" (PDF). THE GRAND CHALLENGE TO REINVENT COMPUTING. Belo Horizonte, Brazil: CSBC.

External links

The Wikibook Algorithm implementation has a page on the topic of: Cocktail sort

Sorting algorithms

Theory	Computational complexity theory Big O notation Total order Lists Inplacement Stability Comparison sort Adaptive sort Sorting network Integer sorting X + Y sorting Transdichotomous model Quantum sort

Exchange sorts	Bubble sort Cocktail shaker sort Odd–even sort Comb sort Gnome sort Quicksort Stooge sort Bogosort

Selection sorts	Selection sort Heapsort Smoothsort Cartesian tree sort Tournament sort Cycle sort

Insertion sorts	Insertion sort Shellsort Splaysort Tree sort Library sort Patience sorting

Merge sorts	Merge sort Cascade merge sort Oscillating merge sort Polyphase merge sort

Distribution sorts	American flag sort Bead sort Bucket sort Burstsort Counting sort Pigeonhole sort Proxmap sort Radix sort Flashsort

Concurrent sorts	Bitonic sorter Batcher odd–even mergesort Pairwise sorting network

Hybrid sorts	Block merge sort Timsort Introsort Spreadsort

Other	Topological sorting Pancake sorting Spaghetti sort

This article is issued from Wikipedia - version of the 9/8/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.