Slick Aircraft Slick 360

Slick 360
Role Aerobatic competition aircraft
National origin South Africa
Manufacturer Slick Aircraft Company
First flight 7 February 2004
Number built 9


The Slick Aircraft Slick 360 is a South African aerobatics aircraft produced by the Slick Aircraft Company of Pretoria, South Africa. It is designed exclusively as an aerobatic competition aircraft, to compete in events such as the Advanced World Aerobatics Championships (AWAC).

Development

The Slick 360 was designed to fill a gap in the light aerobatic aircraft segment, as the aircraft which dominate this segment, the Yak-55, Zlin Z-50 and Extra 230 have all ceased production, making them increasingly hard to obtain. While other Extras are still in production (260, 300, 300S, 300L and 330), they are fitted with six-cylinder (260/300 hp) engines and therefore not allowed to compete in the AWAC. New aircraft have been created in an attempt to replace these three, such as the One Design and the Cap 222, but they have failed to dominate, purportedly due to their excessively-high aileron roll rates, which, being faster than their flick roll rates, results in the flick roll scores being downgraded. In addition, their small size has made them difficult to judge. The result being that neither of the two new designs has yet managed to achieve better results than the older established designs, with the past five AWAC events being won by the Extra 230, Zlin Z-50 and Yak-55. This was borne out by the winner of 2003 AWAC, who was a French pilot who chose to fly an Extra 230 despite the fact that he had access to the French team's Cap 222.

Due to this, the Slick 360 was envisaged as a newer version of the Extra 230, using the same basic concept and design, but with as many upgrades and improvements as possible. To this end, the size, basic wing shape and control system of the Extra 230 were used as the basis for the new aircraft, but the flick roll characteristics were designed to be closer to that of the Laser, from which the Extra 230 was originally derived.

The aircraft's wings were made from a carbon-fibre composite material, and designed by François Jordaan, an aeronautical and structural engineer who had previously designed the wings of the Celstar aerobatic glider and the Ravin 500. In addition to the improvements made to the wing itself, the latest aileron designs were fitted, giving the aircraft a roll rate of around 400 degrees per second.

The aircraft is fitted with a Lycoming AEIO-360-A1B6 engine from AeroSport Power of Canada, which is a fully aerobatic-qualified engine with only one restriction due to the oil system: The pilot is restricted to 10 seconds of vertical flight or steep dives; inverted flight, steep dive; zero "g" manoeuvres and wing-down or knife-edge flights.

Operational history

The Slick 360 is in production and to date 9 have been sold.[1]

However, the pre-production Slick 360 took part in the South African National Aerobatics Championships in June 2004, achieving the unusual distinction of winning the event in its first outing.

Specifications [2]

General characteristics

Performance

See also

Related development
Aircraft of comparable role, configuration and era

References

  1. ↑ "Slick Aircraft - About Us". Slick Aircraft Company. Retrieved March 22, 2012.
  2. ↑ "Slick 360 Pilot's Operating Handbook" (PDF). Slick Aircraft Company. January 2004. Retrieved March 22, 2012.
This article is issued from Wikipedia - version of the 10/23/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.