Soprano helicon

Soprano helicon in E-flat

A Soprano Helicon (in E-flat) is a coiled brass instrument from the Hélicon family.

The design of the modern Soprano Helicon takes acoustical advantage of the helicon's easy blowing, but is not simply another circular Petite Bugle or Soprano Cornet. The helicon clearly has a larger bore and wider tapered conical tube with a large bell for the instrument of its size. The pitch of high E-flat was deliberately chosen, so that musicians can easily play the soprano line within the middle register of the instrument going mostly up to G2. High E-flat was also chosen for its open and piercing nature within the pitched bass winds since it was intended for the Soprano Helicon to become a first and leading voice of the family (speaking in terminology of Band - taking the role of 1st Flugelhorn or 1st Cornet and not the role of Petite Bugle, or Soprano Cornet).

The crew of Melton’s Development Department, led by Ferdinand Kleinschmidt and Andreas Gambs made the first prototype in the beginning of May 2006. This instrument had a bore of an E-flat Alto horn, so the smallest Alto horn mouthpiece was used for playing it. The tapering and bell size was from the Melton MW-F10 Flugelhorn. The instrument had an intense dark sound and great low register down to the lowest pedal tones but on the other hand it had a problematic high register, starting with the written middle "c". Although the intention was to make a brass wind with a voluminous dark sound, there was still problems in the case of the first prototype - mostly caused by creating a soprano instrument with a timbre of an alto.

So the next prototype, which was ready a month later, used a regular bore of B-flat Flugelhorn and a deep cup Flugelhorn mouthpiece. The tapering of the main tube had to be reshaped but the bell size stayed the same – 160 mm. The instrument had four valves (the 4th used as a quart valve). The main tube was also reshaped by moving the tuning slide after the 4th valve instead of having it at the beginning like the Flugelhorns. The 4th valve also had a trigger mechanism (which is operated with the right thumb) to extend the tube for better intonation of tones between low F-sharp and pedal C. The 4th valve itself is operated by the left hand. Another characteristic of this instrument was the bore profile, which remained conical even between the valve sections. The instrument still preserved the richness and volume of the 1st prototype, had a great low register, and it also played well in the higher "soprano" tessitura.

The instrument was ready for the first public appearance. Matej Rihter, the eminent Slovenian trumpeter gave its first performance, playing Après un rêve by Gabriel Fauré by himself on the MID EUROPE Festival 2006 in Schladming on 14th of July. After this debut, the instrument had to go back to the Melton factory in Geretsried for further improvements and finalization. One of the problems was the complicated right thumb mechanism for 4th valve trigger which was very indirect and so far slow in reaction. The concept was changed and the trigger is now operated with the left hand. Since the main tube tended to be too long, the general intonation was a bit flat. With simple pulling out a general tuning slide and tuning slides on the third valve, an E-flat instrument could be easily changed from E-flat to a D instrument. This is especially appropriate for performing the baroque and classical repertoire for corno da caccia, which was often composed "in D". Ferdinand and Andreas decided to equip the instrument with a set of the two tuning slides (D and E-flat) and two 2nd valve slides. Then the Soprano Helicon needed a lacquer and Melton Kunstgravur. By the end of September 2006 the first Soprano Helicon was completely finished and sold to Irena Nadler who is now the first regular student in the world, learning this instrument.

Sound characteristics

As expected, the Soprano Helicon:

This article is issued from Wikipedia - version of the 10/8/2014. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.