Stadler GTW

Stadler GTW

Stadler GTW Railcar, seen near Austin, Texas
Manufacturer Stadler Rail AG
Number built 551
Specifications
Train length 30–39 m (98 ft 5 1⁄8 in–127 ft 11 3⁄8 in) (GTW 2/6)
approx. 53 m (173 ft 10 5⁄8 in) (GTW 2/8)
Width 2.2 or 2.7 m (7 ft 2 5⁄8 in or 8 ft 10 1⁄4 in) (meter gauge)
3.0 or 3.1 m (9 ft 10 1⁄8 in or 10 ft 2 in) (standard gauge)
Maximum speed 115–140 km/h (71–87 mph)
Weight 37–62 t (36.4–61.0 long tons; 40.8–68.3 short tons) (GTW 2/6);
72.4 t (71.3 long tons; 79.8 short tons) (GTW 2/8)
UIC classification 2'+Bo+2' (GTW 2/6);
2'+Bo+2'+2' (GTW 2/8);
2'+Bo+0+Bo+2' (GTW 4/8);
2'+Bo+2'+2'+Bo+2' (GTW 4/12)
Multiple working up to four trains
Track gauge 1,435 mm (4 ft 8 1⁄2 in) standard gauge
1,000 mm (3 ft 3 3⁄8 in) metre gauge
1,668 mm (5 ft 5 21⁄32 in)

The Stadler GTW is an articulated railcar for local transport made by Stadler Rail of Switzerland. GTW stands for Gelenktriebwagen (articulated railcar).

History

First Generation: Goldenpass Be 2/6 7003 Blonay at Blonay (CEV-Bahn)

The Biel–Täuffelen–Ins-Bahn near Bern, Switzerland was looking for a lighter train model to replace its aging fleet, so that a low floor system does not require heavy installations on the roof. Based on that requirement Stadler came up with a concept of placing most of the equipment in a central unit between the seating cars. While the BTI-Bahn tracks are meter gauge, Stadler presented the first prototype in 1995 set on standard gauge rails, and the Mittelthurgau-Bahn was testing three prototypes on its standard gauge network during 1996. The rolling stock for Mittelthurgau was later expanded to 10 GTW 2/6 (built 1998-1999) that are now part of the THURBO fleet (the three prototypes were sold to Italy). The next lots were produced in meter gauge being delivered to the BTI-Bahn and the CEV-Bahn (Chemins de fer électriques Veveysans) in 1997 - although the BTI-Bahn was first to order any GTW with its 7 trains, the CEV-Bahn ordered the biggest lot of the first generation with 20 trains.

In 1998 the Linzer Lokalbahn (Austria) placed an order which needed to be modified to conform to the safety DIN5510 class 2 standard as well as different electrification. These 8 trains were delivered in 2000 from the Swiss facilities and an option of 6 more trains was redeemed in 2005. Another modification was done for the River Line (New Jersey) with an order of 20 DMUs delivered in 2002/2003 from the Swiss facilities.

Second Generation: HLB train 509 108 in Frankfurt

During that time the Hessische Landesbahn (HLB) in Germany was also looking at the new system but actual procurement was delayed until the second generation. In the beginning, Stadler was cooperating with ADtranz/DWA im Germany with the initial batch produced in 1999 at DWA Bautzen (Saxony). Its headshape design follows the style of the Deutsche Bahn trains as they were already on production at DWA, and eventually the DB Regio services did also order a batch of 30 trains of a similar type as the 30 trains ordered by the HLB (only the height of the low floor section differs). The full series were then manufactured at the new Stadler Pankow (Berlin) facilities being built in 2000 by a joint venture with ADtranz. Stadler acquired their shares in 2001 and the final vehicles were delivered from that plant in 2001 by Stadler alone.

The second generation can be easily distinguished by its round headshape made from GFK (glass-fiber reinforced plastic). These follow the DB design being produced since 2000 for other customers as well, for example a batch of 12 trains went to Athens (Greece) in meter gauge (ordered in 1999, delivered since 2003). With the second generation the available options for GTW trains had already expanded - meter gauge vehicles can be ordered in a 2.2 or 2.7 m width and the standard gauge vehicles in a 3.0 or 3.1 m width. Also the GTW 2/6 may be expanded with an additional bogie car making it a GTW 2/8.

Third Generation: Stadler GTW 2/6 (ATR 100) diesel electric for Societá Automobilistica Dolomiti (SAD), used on the Ferrovia della Val Venosta, at Mals station in Italy.

The third generation has minor modifications to the headshape but the more important changes were made to the power module - the electric variant has now 700-800 kW (instead of up to 520 kW) and the diesel-electric variant is available as a DMU-2 with two generators instead of one. This allowed to increase the maximum speed as it was required by the Italian customers where they are named ATR 100 - the Vinschgerbahn (Bozen) was the first to order twelve DMU-2 in 2004, extended by eight verhicles of the same type for the Udine-Cividale line (Padova), also in 2004. The DMU-2 concept impressed the Arriva operator in the Netherlands which ordered 43 trains in 2005 asking for some further developments - the modified type sold well to other operators in the Netherlands and abroad, both as DMU and EMU variants.

The fourth generation came along with new regulations in the EU that were increasing the crash worthiness requirements (see DIN EN 15227). These must be fulfilled by at least 2008 (see 2008/57/EC). This is the same year that much of the production was moved to the branch factory in Siedlce, Poland.

551 units have been sold until 2011[1] and are in use in Austria, France, Germany, Italy, the Netherlands, Slovakia, Switzerland and the United States.

Description

Schematic of the GTW 2/6

Stadler GTW is family of vehicles which differ externally, in the various designs of the head of the vehicle (from angular to streamlined), and also in the different designs and power units that drive them. They also come in different gauges and as rack railway vehicles. The basic version is the GTW 2/6, a railcar which conforms to UIC standards. "2/6" means "two of six axles are powered". The GTW 2/6 is used for example by Deutsche Bahn as Baureihe 646 (Series 646) and by Swiss railways as RABe 526.

The path through the drive container of a GTW 2/8 from Connexxion (Netherlands)

The basic concept is rather unconventional: the car is driven by a central "power module", also known as a "powerpack" or a "drive container", powered on both axles. Two light end modules, each with a bogie, rest on the power module, which produces useful traction weight on the driving axles. The end modules also use the space very effectively, although the railcar is divided into two halves by the power module. Most units have a path through the drive container for passenger access. The end modules can be delivered with standard pulling devices or buffer gears, or with central buffer couplings. They are built with a low-floor design except above the bogies and at the supported ends (more than 65% of the railcar is low-floor). All of the usual comforts to be expected in a modern local network railcar are provided, such as air conditioning, a multi-purpose room, vacuum toilets (in a washroom suitable for the disabled) and a passenger information system. The GTWs can be Diesel-electric or electric-powered (via overhead wires or third rail).

Although the traction is good for the powered bogies the concept has the same problem as other light railcars with the brakes on the non-powered axles having lower grip than traditional railcars. This has led to actual restrictions when leafs are on the rails as the wheel slide protection can not fully compensate the effect. The central power module has limits with heat dissipation as well which can lead into situations where the power output needs to be limited which is automatically done in this construction concept.

Propulsion

There are diesel propulsion modules with 550 kW (740 hp) (since 2003) with 2 x 375 kW (503 hp) = 750 kW (1,006 hp) power available, and electric propulsion modules with 600 to 1,100 kW (800 to 1,480 hp). IGBT based traction converters together with asynchronous motors are used as drive units. The traction converters are manufactured by ABB at their site in Turgi, Switzerland and the motors by TSA Austria.

A Stadler GTW-2/6 DMU train of Proastiakos (Greek: Προαστιακος) in Athens Railway Station

By inserting a middle car (also with only one bogie) on one side of the propulsion module, the GTW 2/6 is expanded to GTW 2/8. Instead of the middle car, another drive module can also be inserted. Between the two modules are then either a trailer passenger car (GTW 4/8) or two medium cars and partitions (GTW 4/12). For operational flexibility up to four GTWs of the same pattern can be operated as a multiple unit.

A US-spec Stadler GTW diesel railcar employed by the River Line light rail system in New Jersey.
Articulated Stadler GTW electric railcar in Austria.

Applications

United States

New Jersey

GTW trains are also planned to operate on SNJLR's Glassboro–Camden Line, currently in development.

Central Texas

Main article: Capital MetroRail

The Capital Metropolitan Transportation Authority (CapMetro) in Austin, Texas, uses six Diesel rail vehicles of the type GTW 2/6 on its 32-mile (51.5 km) red line from Leander to Downtown Austin.

Denton County, Texas

The Denton County Transportation Authority (DCTA), announced on May 20, 2009, that it would purchase 11 GTW 2/6 articulated diesel multiple units (DMUs) for DCTA’s 21-mile (34 km) corridor from Denton to Carrollton. This line connects with the Dallas Area Rapid Transit (DART) Green Line which extends from the Pleasant Grove neighborhood in southeast Dallas to northern Carrollton. The contract includes an option for up to 25 additional GTWs.[2]

East Bay, California

Main article: eBART

The San Francisco Bay Area Rapid Transit District Authority has ordered eight GTW 2/6 DMUs for the eBART 4 ft 8 1⁄2 in (1,435 mm) standard gauge tracks to Antioch, California to be delivered from June 2016 onward, with two options to procure six more.[3]

France

The Panoramique des Dômes in France uses 4 GTW 2/6 since opening in 2012.[4]

Italy

In Italy GTW are used by some regional railways, and called ATR:

Netherlands

Arriva train in Bunde

The multinational transport company Arriva uses the diesels on the lines: Leer (Germany) - Groningen, Nieuweschans - Groningen, Delfzijl-Groningen, Leeuwarden - Groningen, Roodeschool - Groningen, Veendam - Groningen, Zuidbroek - Groningen, Leeuwarden - Sneek, Leeuwarden - Stavoren, Leeuwarden - Harlingen Haven. From December 2012, Arriva is also using diesel GTW's on Arnhem-Winterswijk, Winterswijk-Zutphen and Zutphen-Apeldoorn. The electrified GTW are used on the lines Dordrecht - Geldermalsen and since December 2012 also on Zwolle - Emmen.

Veolia Transport used the electrified GTW on the lines Kerkrade Centrum - Heerlen - Maastricht Randwyck, Heerlen - Maastricht, and the diesels are used on the lines: Roermond - Venlo - Nijmegen.

Connexxion uses one electric GTW for the line: Barneveld Centrum - Amersfoort and is using 9 diesel GTW's for the Breng concession starting December 2012.

Spain

The Catalan government-owned Ferrocarrils de la Generalitat de Catalunya (FGC) purchased two diesel-powered, Iberian gauge trains for use on the Lleida–La Pobla Line.[5] This will allow the service frequency to be increased from 4 to 10 trains per day between Lleida and Balaguer, and 1 to 4 per day between Lleida and La Pobla de Segur.

Switzerland

The Swiss Federal Railways use a narrow version of the GTW 2/6 (RABe 520) on the Seetal railway line and between Lenzburg and Zofingen.

THURBO uses a large fleet of RABe 526 (GTW 2/6 and 2/8) on various lines in eastern Switzerland. Regionalverkehr Mittelland bought several GTW 2/6, which were later extended to GTW 2/8 and finally sold to the Swiss Federal Railways in 2013.

Various narrow gauge railways use GTWs: Chemins de fer du Jura, Biel–Täuffelen–Ins-Bahn, and the Transports Montreux–Vevey–Riviera.

Models

HO scale (1:87)

In 2011, German model manufacturer PIKO introduced a model of the GTW 2/6 in both Diesel and Electric versions in a wide range of liveries including DB-AG Regio red, SBB-CFF-FFS (Swiss Railways) Thurbo and Arriva's Spurt livery. These models are in their "Expert" range and retail for around 200 Euro - accessories available include DCC decoders, interior lighting kits and sound kits for both Diesel and Electric variants. The model themselves can be obtained in DC/DCC 2-rail and AC 3-rail Märklin-compatible versions.

Besides, the Swiss model manufacturer (HAG) also produces the higher end GTW 2/6 and GTW 2/8 in THURBO livery which is of metal body construction, metal pantographs, lit destination signs as well as LED interior lightings with figurines in the interior of the train. Also optional are the onboard sound option which features the GTW 2/6 / GTW 2/8 being factory-fitted with Loksound V4.0 sound decoder that can support up to 15 functions.

See also

References

Wikimedia Commons has media related to Stadler GTW.
This article is issued from Wikipedia - version of the 11/18/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.