Strip steel

Strip Steel^[1] or cold rolled strip is a steel product that is produced from a hot rolled strip that has been pickled. The coil is then reduced by a single stand cold roll steel mill straight away or reversing mill or in a tandem mill consisting of several single stands in a series. The strip is reduced to approximately final thickness by cold-rolling directly, or with the inclusion of an annealing operation at some intermediate thickness to facilitate further cold reduction or to obtain mechanical properties desired in the finished product. High carbon strip steel^[2] requires additional annealing and cold reduction operations.^[3] The coil is then slit to the desired width through the process of roll slitting.

The final product typically consists of cold rolled steel that has been cut into strips of a specific widths and coiled or oscillate coiled for delivery, frequently interleaved with paper or another material which protects the surface finish of the material and assists in retaining oil or some other rust prevention solution. This product is often later stamped to form a part from the strip steel.

References

1. "China manufacturer and supplier of Steel strip,Alloy steel strip,Spring steel strip,Stainless steel strip,High carbon steel strip". Gdgwsteel.com. 2012-05-21. Retrieved 2012-08-11.
2. "China manufacturer and supplier of Steel strip,Alloy steel strip,Spring steel strip,Stainless steel strip,High carbon steel strip". Gdgwsteel.com. 2012-05-21. Retrieved 2012-08-11.
3. "Glossary at Gibraltar Strip Steel" Retrieved on 2009-08-27