Emissivity

Blacksmiths work iron when it is hot enough to emit plainly visible thermal radiation.

The emissivity of the surface of a material is its effectiveness in emitting energy as thermal radiation. Thermal radiation is electromagnetic radiation and it may include both visible radiation (light) and infrared radiation, which is not visible to human eyes. The thermal radiation from very hot objects (see photograph) is easily visible to the eye. Quantitatively, emissivity is the ratio of the thermal radiation from a surface to the radiation from an ideal black surface at the same temperature as given by the Stefan–Boltzmann law. The ratio varies from 0 to 1. The surface of a black object emits thermal radiation at the rate of approximately 448 watts per square meter at room temperature (25 °C, 298.15 K); real objects with emissivities less than 1.0 emit radiation at correspondingly lower rates.[1]

Emissivities are important in several contexts:

Solar water heating system based on evacuated glass tube collectors. Sunlight is absorbed inside each tube by a selective surface. The surface absorbs sunlight nearly completely, but has a low thermal emissivity so that it loses very little heat. Ordinary black surfaces also absorb sunlight efficiently, but they emit thermal radiation copiously.

Mathematical definitions

Hemispherical emissivity

Hemispherical emissivity of a surface, denoted ε, is defined as[7]

where

Spectral hemispherical emissivity

Spectral hemispherical emissivity in frequency and spectral hemispherical emissivity in wavelength of a surface, denoted εν and ελ respectively, are defined as[7]

where

Directional emissivity

Directional emissivity of a surface, denoted εΩ, is defined as[7]

where

Spectral directional emissivity

Spectral directional emissivity in frequency and spectral directional emissivity in wavelength of a surface, denoted εν,Ω and ελ,Ω respectively, are defined as[7]

where

Emissivities of common surfaces

Emissivities ε can be measured using simple devices such as Leslie's Cube in conjunction with a thermal radiation detector such as a thermopile or a bolometer. The apparatus compares the thermal radiation from a surface to be tested with the thermal radiation from a nearly ideal, black sample. The detectors are essentially black absorbers with very sensitive thermometers that record the detector's temperature rise when exposed to thermal radiation. For measuring room temperature emissivities, the detectors must absorb thermal radiation completely at infrared wavelengths near 10×10−6 meters.[8] Visible light has a wavelength range of about 0.4 to 0.7×10−6 meters from violet to deep red.

Emissivity measurements for many surfaces are compiled in many handbooks and texts. Some of these are listed in the following table.[9][10]

Photographs of an aluminum Leslie's cube. The color photographs are taken using an infrared camera; the black and white photographs underneath are taken with an ordinary camera. All faces of the cube are at the same temperature of about 55 °C (131 °F). The face of the cube that has been painted black has a large emissivity, which is indicated by the reddish color in the infrared photograph. The polished face of the cube has a low emissivity indicated by the blue color, and the reflected image of the warm hand is clear.
Material Emissivity
Aluminum foil 0.03
Aluminum, anodized 0.9[11]
Asphalt 0.88
Brick 0.90
Concrete, rough 0.91
Copper, polished 0.04
Copper, oxidized 0.87
Glass, smooth (uncoated) 0.95
Ice 0.97
Limestone 0.92
Marble (polished) 0.89 to 0.92
Paint (including white) 0.9
Paper, roofing or white 0.88 to 0.86
Plaster, rough 0.89
Silver, polished 0.02
Silver, oxidized 0.04
Snow 0.8 to 0.9
Water, pure 0.96

Notes:

  1. These emissivities are the total hemispherical emissivities from the surfaces.
  2. The values of the emissivities apply to materials that are optically thick. This means that the absorptivity at the wavelengths typical of thermal radiation doesn't depend on the thickness of the material. Very thin materials emit less thermal radiation than thicker materials.

Emissivity and absorptivity

There is a fundamental relationship (Gustav Kirchhoff's 1859 law of thermal radiation) that equates the emissivity of a surface with its absorption of incident radiation (the "absorptivity" of a surface). Kirchhoff's Law explains why emissivities cannot exceed 1, since the largest absorptivity - corresponding to complete absorption of all incident light by a truly black object - is also 1.[6] Mirror-like, metallic surfaces that reflect light will thus have low emissivities, since the reflected light isn't absorbed. A polished silver surface has an emissivity of about 0.02 near room temperature. Black soot absorbs thermal radiation very well; it has an emissivity as large as 0.97, and hence soot is a fair approximation to an ideal black body.[12][13]

With the exception of bare, polished metals, the appearance of a surface to the eye is not a good guide to emissivities near room temperature. Thus white paint absorbs very little visible light. However, at an infrared wavelength of 10x10−6 meters, paint absorbs light very well, and has a high emissivity. Similarly, pure water absorbs very little visible light, but water is nonetheless a strong infrared absorber and has a correspondingly high emissivity.

Directional spectral emissivity

In addition to the total hemispherical emissivities compiled in the table above, a more complex "directional spectral emissivity" can also be measured. This emissivity depends upon the wavelength and upon the angle of the outgoing thermal radiation. Kirchhoff's law actually applies exactly to this more complex emissivity: the emissivity for thermal radiation emerging in a particular direction and at a particular wavelength matches the absorptivity for incident light at the same wavelength and angle. The total hemispherical emissivity is a weighted average of this directional spectral emissivity; the average is described by textbooks on "radiative heat transfer".[6]

Emissivity and emittance

Emittance (or emissive power) is the total amount of thermal energy emitter per unit area per unit time for all possible wavelengths. Emissivity of a body at a given temperature is the ratio of the total emissive power of a body to the total emissive power of a perfectly black body at that temperature.

The term emissivity is generally used to describe a simple, homogeneous surface such as silver. Similar terms, emittance and thermal emittance, are used to describe thermal radiation measurements on complex surfaces such as insulation products.[14][15]

SI radiometry units

SI radiometry units
Quantity Unit Dimension Notes
Name Symbol[nb 1] Name Symbol Symbol
Radiant energy Qe[nb 2] joule J ML2T−2 Energy of electromagnetic radiation.
Radiant energy density we joule per cubic metre J/m3 ML−1T−2 Radiant energy per unit volume.
Radiant flux Φe[nb 2] watt W or J/s ML2T−3 Radiant energy emitted, reflected, transmitted or received, per unit time. This is sometimes also called "radiant power".
Spectral flux Φe,ν[nb 3]
or
Φe,λ[nb 4]
watt per hertz
or
watt per metre
W/Hz
or
W/m
ML2T−2
or
MLT−3
Radiant flux per unit frequency or wavelength. The latter is commonly measured in W⋅sr−1⋅m−2⋅nm−1.
Radiant intensity Ie,Ω[nb 5] watt per steradian W/sr ML2T−3 Radiant flux emitted, reflected, transmitted or received, per unit solid angle. This is a directional quantity.
Spectral intensity Ie,Ω,ν[nb 3]
or
Ie,Ω,λ[nb 4]
watt per steradian per hertz
or
watt per steradian per metre
W⋅sr−1⋅Hz−1
or
W⋅sr−1⋅m−1
ML2T−2
or
MLT−3
Radiant intensity per unit frequency or wavelength. The latter is commonly measured in W⋅sr−1⋅m−2⋅nm−1. This is a directional quantity.
Radiance Le,Ω[nb 5] watt per steradian per square metre W⋅sr−1⋅m−2 MT−3 Radiant flux emitted, reflected, transmitted or received by a surface, per unit solid angle per unit projected area. This is a directional quantity. This is sometimes also confusingly called "intensity".
Spectral radiance Le,Ω,ν[nb 3]
or
Le,Ω,λ[nb 4]
watt per steradian per square metre per hertz
or
watt per steradian per square metre, per metre
W⋅sr−1⋅m−2⋅Hz−1
or
W⋅sr−1⋅m−3
MT−2
or
ML−1T−3
Radiance of a surface per unit frequency or wavelength. The latter is commonly measured in W⋅sr−1⋅m−2⋅nm−1. This is a directional quantity. This is sometimes also confusingly called "spectral intensity".
Irradiance
Flux density
Ee[nb 2] watt per square metre W/m2 MT−3 Radiant flux received by a surface per unit area. This is sometimes also confusingly called "intensity".
Spectral irradiance
Spectral flux density
Ee,ν[nb 3]
or
Ee,λ[nb 4]
watt per square metre per hertz
or
watt per square metre, per metre
W⋅m−2⋅Hz−1
or
W/m3
MT−2
or
ML−1T−3
Irradiance of a surface per unit frequency or wavelength. This is sometimes also confusingly called "spectral intensity". Non-SI units of spectral flux density include Jansky = 10−26 W⋅m−2⋅Hz−1 and solar flux unit (1SFU = 10−22 W⋅m−2⋅Hz−1=104Jy).
Radiosity Je[nb 2] watt per square metre W/m2 MT−3 Radiant flux leaving (emitted, reflected and transmitted by) a surface per unit area. This is sometimes also confusingly called "intensity".
Spectral radiosity Je,ν[nb 3]
or
Je,λ[nb 4]
watt per square metre per hertz
or
watt per square metre, per metre
W⋅m−2⋅Hz−1
or
W/m3
MT−2
or
ML−1T−3
Radiosity of a surface per unit frequency or wavelength. The latter is commonly measured in W⋅m−2⋅nm−1. This is sometimes also confusingly called "spectral intensity".
Radiant exitance Me[nb 2] watt per square metre W/m2 MT−3 Radiant flux emitted by a surface per unit area. This is the emitted component of radiosity. "Radiant emittance" is an old term for this quantity. This is sometimes also confusingly called "intensity".
Spectral exitance Me,ν[nb 3]
or
Me,λ[nb 4]
watt per square metre per hertz
or
watt per square metre, per metre
W⋅m−2⋅Hz−1
or
W/m3
MT−2
or
ML−1T−3
Radiant exitance of a surface per unit frequency or wavelength. The latter is commonly measured in W⋅m−2⋅nm−1. "Spectral emittance" is an old term for this quantity. This is sometimes also confusingly called "spectral intensity".
Radiant exposure He joule per square metre J/m2 MT−2 Radiant energy received by a surface per unit area, or equivalently irradiance of a surface integrated over time of irradiation. This is sometimes also called "radiant fluence".
Spectral exposure He,ν[nb 3]
or
He,λ[nb 4]
joule per square metre per hertz
or
joule per square metre, per metre
J⋅m−2⋅Hz−1
or
J/m3
MT−1
or
ML−1T−2
Radiant exposure of a surface per unit frequency or wavelength. The latter is commonly measured in J⋅m−2⋅nm−1. This is sometimes also called "spectral fluence".
Hemispherical emissivity ε 1 Radiant exitance of a surface, divided by that of a black body at the same temperature as that surface.
Spectral hemispherical emissivity εν
or
ελ
1 Spectral exitance of a surface, divided by that of a black body at the same temperature as that surface.
Directional emissivity εΩ 1 Radiance emitted by a surface, divided by that emitted by a black body at the same temperature as that surface.
Spectral directional emissivity εΩ,ν
or
εΩ,λ
1 Spectral radiance emitted by a surface, divided by that of a black body at the same temperature as that surface.
Hemispherical absorptance A 1 Radiant flux absorbed by a surface, divided by that received by that surface. This should not be confused with "absorbance".
Spectral hemispherical absorptance Aν
or
Aλ
1 Spectral flux absorbed by a surface, divided by that received by that surface. This should not be confused with "spectral absorbance".
Directional absorptance AΩ 1 Radiance absorbed by a surface, divided by the radiance incident onto that surface. This should not be confused with "absorbance".
Spectral directional absorptance AΩ,ν
or
AΩ,λ
1 Spectral radiance absorbed by a surface, divided by the spectral radiance incident onto that surface. This should not be confused with "spectral absorbance".
Hemispherical reflectance R 1 Radiant flux reflected by a surface, divided by that received by that surface.
Spectral hemispherical reflectance Rν
or
Rλ
1 Spectral flux reflected by a surface, divided by that received by that surface.
Directional reflectance RΩ 1 Radiance reflected by a surface, divided by that received by that surface.
Spectral directional reflectance RΩ,ν
or
RΩ,λ
1 Spectral radiance reflected by a surface, divided by that received by that surface.
Hemispherical transmittance T 1 Radiant flux transmitted by a surface, divided by that received by that surface.
Spectral hemispherical transmittance Tν
or
Tλ
1 Spectral flux transmitted by a surface, divided by that received by that surface.
Directional transmittance TΩ 1 Radiance transmitted by a surface, divided by that received by that surface.
Spectral directional transmittance TΩ,ν
or
TΩ,λ
1 Spectral radiance transmitted by a surface, divided by that received by that surface.
Hemispherical attenuation coefficient μ reciprocal metre m−1 L−1 Radiant flux absorbed and scattered by a volume per unit length, divided by that received by that volume.
Spectral hemispherical attenuation coefficient μν
or
μλ
reciprocal metre m−1 L−1 Spectral radiant flux absorbed and scattered by a volume per unit length, divided by that received by that volume.
Directional attenuation coefficient μΩ reciprocal metre m−1 L−1 Radiance absorbed and scattered by a volume per unit length, divided by that received by that volume.
Spectral directional attenuation coefficient μΩ,ν
or
μΩ,λ
reciprocal metre m−1 L−1 Spectral radiance absorbed and scattered by a volume per unit length, divided by that received by that volume.
See also: SI · Radiometry · Photometry
  1. Standards organizations recommend that radiometric quantities should be denoted with suffix "e" (for "energetic") to avoid confusion with photometric or photon quantities.
  2. 1 2 3 4 5 Alternative symbols sometimes seen: W or E for radiant energy, P or F for radiant flux, I for irradiance, W for radiant exitance.
  3. 1 2 3 4 5 6 7 Spectral quantities given per unit frequency are denoted with suffix "ν" (Greek)—not to be confused with suffix "v" (for "visual") indicating a photometric quantity.
  4. 1 2 3 4 5 6 7 Spectral quantities given per unit wavelength are denoted with suffix "λ" (Greek).
  5. 1 2 Directional quantities are denoted with suffix "Ω" (Greek).

See also

References

  1. The Stefan-Boltzmann law is that the rate of emission of thermal radiation is σT4, where σ=5.67×10−8 W/m2/K4, and the temperature T is in Kelvins. See Trefil, James S. (2003). The Nature of Science: An A-Z Guide to the Laws and Principles Governing Our Universe. Houghton Mifflin Harcourt. p. 377. ISBN 9780618319381.
  2. "The Low-E Window R&D Success Story". Windows and Building Envelope Research and Development: Roadmap for Emerging Technologies (PDF). U.S. Department of Energy. February 2014. p. 5.
  3. Fricke, Jochen; Borst, Walter L. (2013). Essentials of Energy Technology. Wiley-VCH. p. 37. ISBN 978-3527334162.
  4. Fricke, Jochen; Borst, Walter L. (2013). "9. Solar Space and Hot Water Heating". Essentials of Energy Technology. Wiley-VCH. p. 249. ISBN 978-3527334162.
  5. "Climate Sensitivity". American Chemical Society. Retrieved 2014-07-21.
  6. 1 2 3 Siegel, Robert (2001). Thermal Radiation Heat Transfer, Fourth Edition. CRC Press. p. 41. ISBN 9781560328391.
  7. 1 2 3 4 "Thermal insulation — Heat transfer by radiation — Physical quantities and definitions". ISO 9288:1989. ISO catalogue. 1989. Retrieved 2015-03-15.
  8. For a truly black object, the spectrum of its thermal radiation peaks at the wavelength given by Wien's Law: λmax=b/T, where the temperature T is in kelvins and the constant b≈2.90×10−3 meter-kelvins. Room temperature is about 293 kelvin. Sunlight itself is thermal radiation originating from the hot surface of the sun. The sun's surface temperature of about 5800 kelvin corresponds well to the peak wavelength of sunlight, which is at the green wavelength of about 0.5×10−6 meters. See Saha, Kshudiram (2008). The Earth's Atmosphere: Its Physics and Dynamics. Springer Science & Business Media. p. 84. ISBN 9783540784272.
  9. Brewster, M. Quinn (1992). Thermal Radiative Transfer and Properties. John Wiley & Sons. p. 56. ISBN 9780471539827.
  10. 2009 ASHRAE Handbook: Fundamentals - IP Edition. Atlanta: American Society of Heating, Refrigerating and Air-Conditioning Engineers. 2009. ISBN 978-1-933742-56-4. "IP" refers to inch and pound units; a version of the handbook with metric units is also available. Emissivity is a simple number, and doesn't depend on the system of units.
  11. The visible color of an anodized aluminum surface does not strongly affect its emissivity. See "Emissivity of Materials". Electro Optical Industries, Inc. Archived from the original on 2012-09-19.
  12. "Table of Total Emissivity" (PDF). Table of emissivities provided by a company; no source for these data is provided.
  13. "Influencing factors". evitherm Society - Virtual Institute for Thermal Metrology. Retrieved 2014-07-19.
  14. "ASTM C835 - 06(2013)e1: Standard Test Method for Total Hemispherical Emittance of Surfaces up to 1400°C". ASTM International. Retrieved 2014-08-09.
  15. Kruger, Abe; Seville, Carl (2012). Green Building: Principles and Practices in Residential Construction. Cengage Learning. p. 198. ISBN 9781111135959.

Further reading

This article is issued from Wikipedia - version of the 9/10/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.