Trifeet UAV

Trifeet UAVs are Chinese UAVs developed by Beijing Beijing Trifeet Aero Electronics Co., Ltd. (Trifeet, 北京三足航空电子有限公司). As of 2013, a total of four have been identified.

Swan 01

Swan 01 UAV is an UAV in twin-boom layout with tricycle landing gear. Propulsion is provided by a two-blade propeller driven by a pusher engine mounted at the rear end of the fuselage. Various engines can be utilized, ranging from 150 cc to 220 cc, and the aircraft is constructed from composite material.[1] Specification:[2]

Swan 02

Swan 02 is an UAV of conventional layout with T-tail. Propulsion is provided by a two-blade propeller driven by a 50 cc tractor engine mounted in the nose, and the aircraft is constructed from composite material and has a tiny winglet on each wing.[3] Specification:[4]

Swan 04

Swan 04 is a micro air vehicle (MAV) in blended wing body layout without any vertical rudder but with winglets. Swan 04 is constructed of epoxy with polycarbonate skin. Propulsion is provided by a two-blade propeller driven by a pusher engine mounted at the rear end of the empennage. Specification:[5]

Swan 05

Swan 05 is a MAV of conventional layout. Externally, Swan 05 resembles AeroVironment RQ-11 Raven and the two UAVs have identical layout. Swan 05 is constructed of fiberglass. Specification:[6]

See also

List of unmanned aerial vehicles of the People's Republic of China

References

This article is issued from Wikipedia - version of the 4/3/2014. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.