Turbo File (ASCII)

The Turbo File devices from ASCII Corporation are external storage devices for saving game positions on various Nintendo consoles. The devices have been sold only in Japan, and they are mainly supported by ASCII's own games.

Turbofile

For Famicom, released 1986. Contains 8kB battery-backed SRAM, connects to the Famicom's 15-pin controller expansion port.

Supported by:

Turbofile II

The Turbofile II was designed for the Famicom. Same as Turbofile, but contains 32 Kbytes battery-backed SRAM, divided into 4 slots of 8 Kbytes, the slots are selectable via a 4-position switch.

Turbo File Adapter

For Super Famicom, released around 1992. Allows to connect a Turbo File or Turbo File II to Super Famicom consoles. Aside from the pin-conversion (15pin Famicom to 7pin Super Famicom controller port), the device does also contain some electronics (adding a SNES-controller ID code, and inventing a more complicated transmission protocol for entering the data transfer mode).

Supported by:

Turbo File Twin

For Super Famicom, released around 1995. Contains 160 Kbytes battery-backed SRAM.[1] 4×8 Kbytes are used in the four TFII-modes (emulating a Turbo File II with Turbo File Adapter), the remaining 128 Kbytes are used for a new SNES-specific "STF" mode. The STF mode is supported by:

Turbo File GB

For 8bit Game Boy. Connected via the link cable port. Data was stored on memory cards that connected to the device.

Supported titles include:

Turbo File Advance

For Game Boy Advance. Sold by Sammy.

Supported titles include:

References

This article is issued from Wikipedia - version of the 6/4/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.