Wrench size

Technical drawing with key width

As key length is the distance between two parallel surfaces, mostly for torque transmission by positive locking serve.

The term key length is used for the following forms:

Spanner

The key length indicates the "size" of the tool. It is imprinted on the wrenches in mm values. English and American wrenches have inch sizes that are imprinted in intermediate sizes in fractions.

Key width

The key length of the workpiece (for example screws, nuts, clamps) is nominally the same as that on the tool.

d: 1,6 2 2,5 3 3,5 4 5 6 8 10 12 14 16 18 20 22 24 27 30 33 36 39 42
s: 3,2 4 5 5,5 6 7 8 9 10 11 12 13 14 15 17 18 21 24 27 30 34 36 41 46 50 55 60 65
DIN ISO 272
Area fasteners
Titel {{{rule}}}
Summary: {{{Overview}}}
Last output 1979-10
ISO 272

Widths on bicycle

In addition to industry standards exist or special thread factory standards, such as the bicycle thread according to DIN 79012, a fastening thread on metric-inch size basis of the designation. Modern bicycle spokes carry the bike thread FG 2.3.[1]

References

This article is issued from Wikipedia - version of the 7/9/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.