Bell Sidewinder

Sidewinder
Role Ultralight aircraft
National origin United States
Designer Fred Bell
Status Production completed
Developed from Phantom X1

The Bell Sidewinder is an American ultralight aircraft that was designed by Fred Bell. The aircraft was supplied as a kit for amateur construction.[1]

Design and development

The Sidewinder is a copy of the Phantom X1 that was created by former Phantom Aeronautics employee Fred Bell. It was designed to comply with the US FAR 103 Ultralight Vehicles rules, including the category's maximum empty weight of 254 lb (115 kg). The aircraft has a standard empty weight of 250 lb (113 kg). It features a cable-braced high-wing, a single-seat, open cockpit, tricycle landing gear and a single engine in tractor configuration.[1]

The aircraft is made from bolted-together aluminum tubing, with the flying surfaces covered in Dacron sailcloth. The Sidewinder differs from the X1 in having flaps. Its 30 ft (9.1 m) span wing is cable-braced from an inverted "V" kingpost mounted on top of the wing. The landing gear has suspension on all wheels and features a steerable nosewheel, plus main wheel brakes. The pilot is accommodated on an open seat, partially enclosed by a fibreglass fairing with a windshield. The standard engine provided was the Kawasaki TA 440A snowmobile powerplant of 37 hp (28 kW).[1]

Specifications (Sidewinder)

Data from Cliche[1]

General characteristics

Performance

See also

Related development


References

  1. 1 2 3 4 Cliche, Andre: Ultralight Aircraft Shopper's Guide 8th Edition, page E-33 and 37. Cybair Limited Publishing, 2001. ISBN 0-9680628-1-4
This article is issued from Wikipedia - version of the 6/23/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.