Bell YAH-63

Bell 409 / YAH-63A
A YAH-63A prototype
Role Attack helicopter prototype
Manufacturer Bell Helicopter Textron
First flight 1 October 1975
Primary user United States Army
Number built 3


The Bell Model 409/YAH-63 was an experimental attack helicopter for the Advanced Attack Helicopter (AAH) competition. Hughes' Model 77/YAH-64, later developed into the AH-64 Apache, was selected over Bell's entry.

Design and development

During the mid-1960s, United States Army initiated the Advanced Aerial Fire Support System (AAFSS) program to develop the Lockheed AH-56 Cheyenne for the anti-tank gunship role. The U.S. Army pursued the AH-1G HueyCobra as an interim type for the "jungle fighting" role. However the Army's broader concern was the task of protecting Western Europe from the legions of Warsaw Pact armor to the east.[1]

In 1972, the Army conducted an evaluation between the Bell 309 KingCobra, the Lockheed Cheyenne, and the Sikorsky S-67 in a competitive fly-off. The fly-off began in the spring of 1972 and was completed in July. In August, somewhat to everyone's shock, the Army rejected all three competitors.[2]

Difficulties delayed the AH-56 Cheyenne development. The Army canceled the Cheyenne program in August 1972. Controversy over the Cheyenne's role in combat and the political climate regarding military acquisition programs caused the Army to amend the service's attack helicopter requirements in favor of a simpler and more survivable conventional helicopter.[3][4]

Advanced Attack Helicopter

The Army sought an aircraft to fill an anti-armor attack role. The Army wanted an aircraft better than the AH-1 Cobra in firepower, performance and range. The aircraft would have the maneuverability to fly nap-of-the-earth (NoE) missions. To this end, the U.S. Army issued a request for proposals (RFP) for an Advanced Attack Helicopter (AAH) in 1972.[4][5]

The Army specified that the AAH was to be powered by twin General Electric T700 turboshaft engines with 1,500 shp (1,120 kW) each. This was the same powerplant fit specified for a new Army utility helicopter competition that would be won by the Sikorsky S-70 Black Hawk. The AAH would be armed with a 30 millimeter cannon and sixteen BGM-71 TOW anti-tank missiles. The missile armament specification was later modified to include an alternate load of sixteen laser-guided AGM-114 Hellfire anti-tank missiles. Hellfire was then in development and promised greater range and lethality than TOW.[2]

Bell, Boeing-Vertol (teamed with Grumman), Hughes, Lockheed, and Sikorsky all submitted proposals for the AAH program. In June 1973, Bell and Hughes were selected as finalists, and each was awarded a contract for the construction of two prototype aircraft.[6]

The Bell entry, the Model 409 (YAH-63), was by no means "just another Cobra design" though it utilized Cobra technology where possible. Although it had what had become by then the typical configuration for a helicopter gunship, with a sharklike fuselage, tandem crew seating, and stub wings for armament, the YAH-63 was largely a new machine.[2]

Distinctive features included wheeled tricycle landing gear, flat canopy window plates, an unusual "tee" tail, a large ventral fin, and a three-barreled General Electric XM-188 30 mm (1.18 in) cannon. The YAH-63's rotor mast could be lowered and the landing gear could kneel to reduce its height for transport.[7] One less noticeable feature was that the pilot occupied the front seat instead of the rear, the reverse of the AH-1's arrangement. This was believed to be more prudent since the YAH-63 was intended to fly "in the treetops" during "Nap of the Earth" (NoE) operations, and the pilot needed to have a clear view of the aircraft's surroundings.[2]

The first prototype of the YAH-63 (serial 73-22246)[8] made its initial flight on 1 October 1975. This rotorcraft crashed in June 1976 but a static test prototype was brought up to flight standard and, along with the second prototype (73-22247), entered the flyoff against the Hughes entry, the Model 77 (YAH-64).[2]

The Hughes YAH-64 was selected in December 1976 and was developed into the production AH-64 Apache version. The Army believed that the YAH-63's two-blade rotor was more vulnerable to damage than the Apache's four-bladed rotor. In addition the service did not like the YAH-63's tricycle landing gear scheme, believing it was less stable than the Apache's "taildragger" configuration. Some observers also suspected the Army did not want to divert Bell from AH-1 production.[2] Bell would use its experience with the T700 engine to develop the AH-1T+ design and later AH-1W.[9]

Operators

Specifications (YAH-63)

Data from International Directory of Military Aircraft, 2002-2003[10]

General characteristics

Performance

Armament

See also

Related development
Aircraft of comparable role, configuration and era
Related lists

References

  1. Greg Goebel. First Generation Cobras Archived April 8, 2012, at the Wayback Machine.. Vectorsite, 1 December 2008.
  2. 1 2 3 4 5 6 Greg Goebel. Model 309 Kingcobra / Model 409 AAH (YAH-63). Vectorsite, 1 December 2008.
  3. Robb, Raymond L. "Hybrid helicopters: Compounding the quest for speed". Vertiflite. Summer 2006. American Helicopter Society.
  4. 1 2 Office of the Assistant Vice Chief of Staff of the Army (OAVCSA). An Abridged History of the Army Attack Helicopter Program. Washington, DC: Department of the Army, 1973.
  5. Bishop, Chris. Apache AH-64 Boeing (McDonnell Douglas) 1976–2005. Osprey Publishing, 2005. ISBN 1-84176-816-2.
  6. Bishop, Chris. Huey Cobra Gunships. Osprey Publishing, 2006. ISBN 1-84176-984-3.
  7. Verier 1990, p. 142.
  8. Pike, John. YAH-63. GlobalSecurity.org, 12 January 2008.
  9. Verier 1990, pp. 143-144.
  10. Frawley, Gerard. The International Directory of Military Aircraft, p. 148. Aerospace Publications Pty Ltd, 2002. ISBN 1-875671-55-2.

External links

Wikimedia Commons has media related to Bell YAH-63.
This article is issued from Wikipedia - version of the 11/17/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.